Instrukcja obsługi Lightolier Convertible IC/Non IC 1104FESR

Streszczenie treści zawartej na stronie nr. 1

Instruction Sheet Number 1104FES
Page  of 2 Installation Procedure for Convertible IC/Non IC Frame-In-Kits
Read and understand these instructions before installing fixture.
This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and
regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.
Retain

Streszczenie treści zawartej na stronie nr. 2

REMovE Instruction Sheet Number 1104FES Page 2 of 2 Installation Procedure for Convertible IC/Non IC Frame-In-Kits 4. Close-In (Fig. D) Install plasterboard or other dry type ceiling. hole in board can be cut either SquEEzE CLIP on the floor or after the board is secured to the ceiling using houSING Squeeze to adjust, Deform Material Here release to lock for Additional Lock opening as cutting guide. houSING is secured by 3 screws which allow adjustment for variable ceiling thicknesses. ® 5