Instrukcja obsługi Chief Manufacturing FHP18-110

Streszczenie treści zawartej na stronie nr. 1

INSTALLATION INSTRUCTIONS
Small Flat Panel Ceiling Mount
with Adjustable Column (FHP18-110)
The FHP is a sleek, Centris™ mounting system designed for all
VESA® 75mm/100mm compliant displays. The mount includes
an adjustable column, cable management, and a variety of
screen positioning options. The all-metal mount is available in
either silver or black.
The slender column on the mount is finely finished with easy
adjustment between 12 inches and 18 inches in 1 inch incre-
ments. The snap on

Streszczenie treści zawartej na stronie nr. 2

Installation Instructions FHP IMPORTANT WARNINGS AND PRECAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre- sponding instructions. • WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can support a redundant weight factor five times t

Streszczenie treści zawartej na stronie nr. 3

Installation Instructions FHP DRAWINGS PHILLIPS PAN HEAD SCREW (Adjustment Screw) PHILLIPS PAN HEAD SCREW (Adjustment Screw) 3

Streszczenie treści zawartej na stronie nr. 4

Installation Instructions FHP INSPECT THE UNIT BEFORE INSTALLING WARNING: Watch for pinch points. Do not put your fingers between movable parts. 1. Carefully inspect the FHP for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the installation until the carrier has reviewed the damage. NOTE: Read all instructions before starting installation. 2. Lay out components to ensure you have all the required parts before proceeding (see FHP drawing

Streszczenie treści zawartej na stronie nr. 5

Installation Instructions FHP DISPLAY INSTALLATION Install the display as follows: VESA Compliant Flush Mounting CAUTION: If monitor uses a screw size other than M4, DO NOT use the M4 screws provided. Using the wrong screws could result in damage to your display. 1. Start two M4 X .7 X 12mm Phillips pan head screws in the top mounting holes of your display. 2. Matching the hole pattern on your display with the hole pattern on the mount, hang the mount from the two screws started in Step A

Streszczenie treści zawartej na stronie nr. 6

Installation Instructions FHP CABLE MANAGEMENT WARNING: Make sure your cables do not run through a pinch point. 1. Route power/audio/video cables against column, allowing suf- ficient slack in cables for extension and avoiding pinch points. 2. Install top cable cover over cables (see Figure 5). 3. Measure distance of remaining exposed cables and, using a saw or appropriate tool, cut lower cable cover to length. 4. Install bottom cable cover over remaining exposed cables. ADJUSTMENTS CAUTION:

Streszczenie treści zawartej na stronie nr. 7

Installation Instructions FHP 7

Streszczenie treści zawartej na stronie nr. 8

Installation Instructions FHP 8