Streszczenie treści zawartej na stronie nr. 1
Deluxe Movement Sensor
with Sound Monitor
Sensor de Movimiento Deluxe con Monitor de Sonido
Model #AC401-2P
Instruction Manual
Manual de Instrucciones
www.bebesounds.com
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Introduction...................................................................................................................................................................... 3 Setting Up Your Monitor............................................................................................................................................. 4 Changing Optional Features Settings...................................................................................................
Streszczenie treści zawartej na stronie nr. 3
INTRODUCTION ® ® Thank you for purchasing our BébéSounds Deluxe Angelcare Movement Sensor with Sound Monitor. This monitor can detect your baby’s slightest movements, even while she sleeps. An alarm will sound alerting you to check your baby ONLY if she becomes absolutely still for 20 ® seconds. In addition, your Angelcare monitor can also work as a conventional sound monitor. Please read all the instructions carefully before operating this monitor. Please save this manual for future reference.
Streszczenie treści zawartej na stronie nr. 4
SETTING UP YOUR MONITOR SENSOR PAD (See figs. 1 and 2) Place the Sensor Pad under the center of the crib mattress with the turquoise side facing up. Do not place any loose bedding or linen between the crib mattress and the Sensor Pad. The Sensor Pad must rest on a flat, firm surface. If your crib has a spring or slat base, place a piece of plywood or Masonite under the Sensor Pad. This support must measure at least 13 1 inches long on all four sides and /4 inch thick. (You may order a Masonite b
Streszczenie treści zawartej na stronie nr. 5
NURSERY UNIT (Transmitter) (See figs. 3 and 4) Front Back Nightlight Movement Page Button Sensitivity Sensor Control Pad Jack Power Nightlight Switch Power Switch AC Adapter Jack Low Battery Movement Indicator Light Indicator Light Battery Microphone Power Compartment Speaker Indicator Light fig. 3 fig. 4 AC Power. The Nursery Unit can operate with just batteries or an AC adapter. For AC power insert the AC adapter into the jack marked “7.5V” and plug the adapter into an electrical outlet. If yo
Streszczenie treści zawartej na stronie nr. 6
Movement Sensitivity Control. The movement sensitivity control is on the back of the Nursery Unit. The level has been preset to 2.5 (see fig. 6). Do not adjust this unless you receive false alarms. Refer to the Movement Sensitivity Adjustment section on Pg. 12. It is extremely important to follow our instructions for setting the fig. 6 sensitivity level. Now plug the Sensor Pad cord into the jack on the back of the Nursery Unit marked “Sensor Pad.” Turn the Nursery Unit on using the switch on th
Streszczenie treści zawartej na stronie nr. 7
When charging is complete, turn the Parents’ Unit on by pressing the Power button for two seconds. The display will turn on and the channel will be displayed for 10 seconds. Then the temperature of the nursery will be displayed. (If this fails to happen, you may need to reestablish the connection between the Parents’ and Nursery Units. Please refer to the Parents’ Unit and Nursery Unit Connection section on Pg. 13.) If the Parent’s Unit is turned on while the Nursery Unit is off, the Nursery Uni
Streszczenie treści zawartej na stronie nr. 8
CHANGING OPTIONAL FEATURE SETTINGS The controls for all the optional features are located on the Parents’ Units. You only need to change the settings on one Parents’ Unit as the second one will automatically change as well. To access the optional features, press the Menu button. You can toggle through the features by repeatedly pressing the Menu button. A flashing symbol indicates that feature can be activated, deactivated, or adjusted by pressing the Arrow buttons and then the Select button. T
Streszczenie treści zawartej na stronie nr. 9
• Movement & Tic. The Movement Sensor is enabled and detects your baby’s movements. You will also hear a ticking sound from the Nursery Unit as the Sensor Pad senses your baby’s movement. Your baby’s sounds, the movement alarm, and the ticking will not be transmitted to the Parents’ Unit. For this setting, the Movement and “Tic” symbols will appear (see fig. 16). fig. 16 Once you have completed your selections, press the Menu button to change another feature setting or press the Exit button to
Streszczenie treści zawartej na stronie nr. 10
Sound and Vibration Alarms (See fig. 19) If no movement is detected by the Sensor Pad, you have the option to have a sound alarm, a vibration alarm, or both. 1. Press the Menu button until the Sound and/or Vibration symbols appear. 2. Use the Arrow buttons to make your selection. If you want only a sound alarm, the Sound symbol will appear. If you want only a vibration alarm, the Vibration symbol will appear. If you want both alarms, both the fig. 19 Sound and Vibration symbols will appear. 3. P
Streszczenie treści zawartej na stronie nr. 11
TESTING YOUR MONITOR Always test your monitor before using it the first time and then on a periodic basis. Before testing your monitor, complete the setup process as described above. 1. Testing for Sound. Turn the Nursery Unit and Parents’ Unit on and be sure the Sound symbol appears on the Parents’ Unit. Have someone else speak into the Nursery Unit or place a radio near the Nursery Unit while you take the Parents’ Unit into another room. You should hear the sounds being transmitted from the Nu
Streszczenie treści zawartej na stronie nr. 12
USING YOUR MONITOR After the monitor has been set up and tested, place your baby in the crib. If you have selected the Movement and Sound feature on the Parents’ Unit, the Sensor Pad will detect your baby’s slightest movements and the Nursery and Parents’ Unit will act as a sound monitor. If you have only selected the Sound feature, it will not detect your baby’s movement but will continue to work as a regular sound monitor and only transmit nursery sounds. If you have selected the Movement feat
Streszczenie treści zawartej na stronie nr. 13
Sound Lights The Parents’ Unit features Sound Lights so you can “see” your baby’s sounds if background noise prevents you from hearing your baby. As the sounds get louder, more lights illuminate. Optional “Tic” Feature (See fig. 21) When the “Tic” feature is selected, the Parents’ Unit will continuously tick as your baby’s movement is detected by the Sensor Pad. In addition, the “Tic” symbol will swing as it senses movement. If no movement is detected, the ticking will stop and the swing of the
Streszczenie treści zawartej na stronie nr. 14
TIPS FOR USING YOUR MONITOR • When the monitor is in use, do not use a crib mobile or other crib accessories that may produce vibrations. Other sources of vibrations may include fans, washing machines, loud ® music, etc. These sources of vibration may interfere with the performance of your Angelcare monitor and the alarm will not sound if it continues to detect any movement other than your baby’s. Be sure all vibration sources are eliminated before using the monitor. • You may experience false
Streszczenie treści zawartej na stronie nr. 15
Symbol Name Meaning Movement Appears when Movement feature is selected. • “Tic” Appears when “Tic” feature is selected. • Movement Indicator Swings when movement is detected regardless of whether or not “Tic” is on. Out-of-Range If Activated • Out-of-Range symbol appears. • Appears when Nursery and Parents’ Units are within range. • Flashes when they are out of range. • Flashes when Nursery Unit shuts down due to low battery. • Flashes when the channel is being changed. • Flashes when Nursery
Streszczenie treści zawartej na stronie nr. 16
SUMMARY OF ALARMS Display Alarm What It Means Continuous beeping Sensor Pad does not detect movement. and/or vibration Two beeps sound every Parents’ Unit is out of range of the 8 seconds. Nursery Unit or the Nursery Unit is off. Three beeps sound every Nursery temperature is below the 4 seconds. set temperature range. Three beeps sound every Nursery temperature is above the 4 seconds. set temperature range. A short beep sounds every Battery level is low on Parents’ Unit. 15 seconds. A short bee
Streszczenie treści zawartej na stronie nr. 17
10. This monitor is perfectly safe. The Sensor Pad and its cord are entirely passive. CARE AND CLEANING Disconnect all units and remove all batteries before cleaning. Clean the exterior surface of the units with a soft dry or slightly damp cloth. Do not spray with cleaning products or solvents. Do not submerge in water or any other liquid. During long periods of non-use remove all batteries from their compartments and unplug the AC adapters. TROUBLESHOOTING Problem Possible Cause Solution False
Streszczenie treści zawartej na stronie nr. 18
Problem Possible Cause Solution Sensor Pad cord is not Unplug and reconnect connected properly to the the cord. Nursery Unit. Nursery Unit is detecting Avoid contact with the crib Movement alarm will not sound. movement when crib is when monitor is on. being touched. Nursery Unit is detecting Place crib near a solid movement from outside the supporting wall to avoid crib such as motorized Sensor Pad from detecting devices, strong drafts, etc. movement from outside the crib. Turn off crib mobile,
Streszczenie treści zawartej na stronie nr. 19
Problem Possible Cause Solution Parents’ Unit is Press the Power button temporarily muted. to deactivate the mute. Units have lost connection Reconnect units. Refer to with one another. the Parents’ Unit and Nursery Unit Connection section on Pg.13. Batteries are low or Check or replace batteries. improperly installed. AC adapters are not con- Check connections nected properly or electrical or change to another outlet is out of order. electrical outlet. Either the Parents’ Unit or Make sure both
Streszczenie treści zawartej na stronie nr. 20
Problem Possible Cause Solution One or both units Change the position of one are placed near a large or both units. metal mass. One or both units are not in Place units on flat surface the upright position. away from baby’s reach. Batteries are low. Check or replace batteries. There is static, distortion, Parents’ and Nursery Units Bring Parents’ Unit closer interference, etc. are too far apart. to Nursery Unit. Activating the Out-of-Range feature will tell you the units are too far apart. Ther
