Streszczenie treści zawartej na stronie nr. 1
Cordless Impact
Wrench
Equipped with Electric Brake
9.5 mm (3/8”)
MODEL 6907D
002291
INSTR UCTION MA NU A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
www.makitatools.com
Streszczenie treści zawartej na stronie nr. 2
SPECIFICATIONS Model 6907D Standard bolt M5 - M12 (3/16” - 1/2”) Capacities High tensile bolt M5 - M10 (3/16” - 3/8”) Square drive 9.5 mm (3/8”) No load speed (RPM) 0 - 2,000/min. Impacts per minute 0 - 2,600 Max. fastening torque 68.6 N.m (51 ft.lbs) Dimensions (L x W x H) 185 mm x 85 mm x 225 mm (7-5/16” x 3-3/8” x 8-7/8”) Net weight 1.3 kg (2.9 lbs) Battery Charging Battery Cartridge Voltage Input Output Charger time A. C. only D. C. 9100 9.6 V DC9710 60 min. 50 Hz - 60 Hz 7.2 V - 9.6 V • Ma
Streszczenie treści zawartej na stronie nr. 3
tools create sparks which may ignite the dust 11. Use safety equipment. Always wear eye or fumes. protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must 3. Keep bystanders, children, and visitors be used for appropriate conditions. away while operating a power tool. Distrac- tions can cause you to lose control. Tool Use and Care Electrical Safety 12. Use clamps or other practical way to secure and support the workpiece to a 4. A battery operated tool with integral bat
Streszczenie treści zawartej na stronie nr. 4
viced before using. Many accidents are SERVICE caused by poorly maintained tools. 21. Tool service must be performed only by 20. Use only accessories that are recom- qualified repair personnel. Service or main- mended by the manufacturer for your tenance performed by unqualified personnel model. Accessories that may be suitable for may result in a risk of injury. one tool may create a risk of injury when 22. When servicing a tool, use only identical used on another tool. replacement parts. Follo
Streszczenie treści zawartej na stronie nr. 5
SYMBOLS USD302-1 The followings show the symbols used for tool. V ....................... volts .../min................revolutions or reciprocation per minute ................... direct current ................number of blow ................... no load speed n ˚ IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE USC001-3 1. SAVE THESE INSTRUCTIONS - This man- 6. To reduce risk of damage to electric plug ual contains important safety and operat- and cord, pull by plug rather than cor
Streszczenie treści zawartej na stronie nr. 6
damaged in any way; take it to a qualified 14. Young children should be supervised to serviceman. ensure that they do not play with the bat- tery charger. 11. Do not disassemble charger or battery cartridge; take it to a qualified serviceman 15. If operating time has become excessively when service or repair is required, Incor- shorter, stop operating immediately. It rect reassembly may result in a risk of may result in a risk of overheating, possi- electric shock or fire. ble burns and even an
Streszczenie treści zawartej na stronie nr. 7
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. 002300 Installing or removing battery cartridge 1 • Always switch off the tool before insertion or removal of the battery cartridge. • To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool. 2 • To insert the battery cartridge, align the tongue o
Streszczenie treści zawartej na stronie nr. 8
NOTE: • The battery charger is for charging Makita battery cartridge. Never use it for other purposes or for other manufacturer’s batteries. • When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it completely and recharging a couple of times. • When you charge a battery cartridge f
Streszczenie treści zawartej na stronie nr. 9
002977 Switch action CAUTION: • Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when 1 released. To start the tool, simply pull the switch trigger. Tool speed is 1. Switch trigger increased by increasing pressure on the switch trigger. Release the switch trigger to stop. Electric brake This tool is equipped with an electric brake. If the tool consis- tently fails to quickly stop after switch tri
Streszczenie treści zawartej na stronie nr. 10
002339 Installing or removing socket To install the socket, push it onto the anvil of the tool until it 1 locks into place. To remove the socket, simply pull it off. 2 1. Socket 2. Anvil OPERATION 002352 The proper fastening torque may differ depending upon the N.m Standard bolt (ft.lbs) kind or size of the bolt, the material of the workpiece to be 80 (58) M12X45 (1/2” X 1-25/32”) fastened, etc. The relation between fastening torque and fas- 60 (43) M10X45 (3/8” X 1-25/32”) tening time is sho
Streszczenie treści zawartej na stronie nr. 11
• A worn socket ( wear on the hex end or square end ) will cause a reduction in the fastening torque. 3. Bolt • Even though the torque coefficient and the class of bolt are the same, the proper fastening torque will differ according to the diameter of bolt. • Even though the diameters of bolts are the same, the proper fastening torque will differ according to the torque coefficient, the class of bolt and the bolt length. 4. The manner of holding the tool or the material of driving position to be
Streszczenie treści zawartej na stronie nr. 12
ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita service center. • Various type of Makita genuine batteries and chargers • Plastic carrying case 12
Streszczenie treści zawartej na stronie nr. 13
First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold 13 Cut
Streszczenie treści zawartej na stronie nr. 14
MAIL THIS PORTION Your answers to the following questions are appreciated. 1. This product was purchased from: 3. How did you learn about this product: Home Center Other ( ) Magazine Radio Hardware/Lumber Store From Dealer Exhibition Tool Distributor Newspaper From Friend Industrial Supply Store Display Previous Usage Construction Supply Catalog Other ( ) 2. Use of the product is intended for: 4. Most favored points are: Construction Trade Design Repair Se
Streszczenie treści zawartej na stronie nr. 15
FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ALABAMA COLORADO KENTUCKY NEW MEXICO PUERTO RICO 2365 Pelham Parkway 11839 E. 51st Ave. 1215 S. Hurstbourne Parkway 5805 Menaul Blvd. NE 200 Guayama St. Pelham, AL 35124 Denver, CO 80239-2709 Louisville, KY 40222 Albuquerque, NM 87110 Hato Rey, PR 00917 (205) 620-1791 (303) 371-2850 (502) 326-3740 (505) 881-4619 (787) 250-8776 ARIZONA CONNECTICUT LOUSIANA NEW YORK TENNESSEE 3707 E. Broadway Rd., Ste. 6 508 Spring St.
Streszczenie treści zawartej na stronie nr. 16
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of
