Streszczenie treści zawartej na stronie nr. 1
AutoDome 700 Series IP PTZ Camera
VG5 700 Series
en User Manual
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
AutoDome 700 Series IP PTZ Camera Table of Contents | en 3 Table of Contents 1 Getting Started 6 1.1 Powering On 6 1.2 Establishing AutoDome Control 6 2 Using the AutoDome 700 Series 7 2.1 Overview of Features 7 2.2 System Requirements 7 2.3 Connecting the AutoDome 700 Series to the PC 8 2.4 Configuring the AutoDome 700 Series Camera 9 2.4.1 Changing the Network Settings 10 2.5 Configuring Intelligent Tracking 11 2.5.1 Intelligent Tracking Operation 11 2.5.2 Guidelines for Implementing Intellige
Streszczenie treści zawartej na stronie nr. 4
4 en | Table of Contents AutoDome 700 Series IP PTZ Camera 4.15 Livepage Functions 31 4.16 Logging 32 4.17 Advanced Mode: Camera 32 4.18 Installer Menu 32 4.19 Encoder Profile 33 4.20 Encoder Streams 35 4.21 Privacy Masks 36 4.22 Camera Settings 37 4.23 Lens Settings 39 4.24 PTZ Settings 40 4.25 Diagnostics 41 4.26 Preposition and Tours 41 4.27 Sectors 42 4.28 Miscellaneous 43 4.29 Logs 43 4.30 Audio 43 4.31 Pixel Counter 43 4.32 Advanced Mode: Recording 43 4.33 Storage Management 43 4.34 Record
Streszczenie treści zawartej na stronie nr. 5
AutoDome 700 Series IP PTZ Camera Table of Contents | en 5 5 Troubleshooting Guide 66 5.1 VG5 AutoDome Operation and Control 66 5.2 VG5 700 Series AutoDome Video and Control 66 5.3 VG5 Series AutoDome Audio 68 6 User Command Table 71 Index 72 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08
Streszczenie treści zawartej na stronie nr. 6
6 en | Getting Started AutoDome 700 Series IP PTZ Camera 1 Getting Started Install and wire the AutoDome according to the VG5 AutoDome Installation Manual. A typical system includes an ethernet connection, a video management system, a monitor, and appropriate wiring connections. Please refer to the individual product manuals for complete installation and setup instructions for each of the system components. 1.1 Powering On When you turn the AutoDome power on there is a ten (10) second pause b
Streszczenie treści zawartej na stronie nr. 7
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 7 2 Using the AutoDome 700 Series The AutoDome 700 Series transmits PTZ control commands and images over a TCP/IP network. It also allows users to configure the camera display settings, camera operating settings, and to configure the network parameters. The AutoDome 700 Series incorporates a network video server in the IP module. The primary function of the server is to encode video and control data for transmission over a T
Streszczenie treści zawartej na stronie nr. 8
8 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera NOTICE! The Web browser must be configured to enable Cookies to be set from the IP address of the unit. In Windows Vista, deactivate protected mode on the Security tab under Internet Options. You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer. If you choose to use a computer running Microsoft Internet Explorer or any of the Bosch software, the computer must conform to the follow
Streszczenie treści zawartej na stronie nr. 9
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 9 Figure 2.1 AutoDome 700 Series System Configuration 1 AutoDome 700 Series 2IP Connection 3 Network Switch 4Computer NOTICE! You can also use the Bosch Video Client utility to configure the network settings for an AutoDome 700 Series camera. Go to www.boschsecurity.com to download the Configuration Manager software and Operating Manual. 2.4 Configuring the AutoDome 700 Series Camera To operate the camera in your network you
Streszczenie treści zawartej na stronie nr. 10
10 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera 2.4.1 Changing the Network Settings The AutoDome 700 Series has a default IP address of 192.168.0.1. To change the IP address or any network settings, you can use the Configuration Manager software or the AutoDome 700 Series server. NOTICE! Contact your local network administrator for a valid IP address, Subnet Mask, and a Gateway IP Address. Using the Configuration Manager Configuration Manager is an optional network
Streszczenie treści zawartej na stronie nr. 11
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 11 NOTICE! Click the Help on this page? link if you need more information. 8. Click the Set button to save the settings. 9. Launch another instance of Microsoft Internet Explorer. 10. Type the original IP address followed by /reset (for example, http://192.168.0.1/reset) in the address bar and click Go to restart the AutoDome 700 Series. Once you restart the AutoDome 700 Series, use the new IP Address to access the Livepage.
Streszczenie treści zawartej na stronie nr. 12
12 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera 2.5.2 Guidelines for Implementing Intelligent Tracking Factors such as the viewing angle and unwanted motion (from trees, for example) may interfere with Intelligent Tracking operation. Use the following recommendations to ensure smooth Intelligent Tracking operation: – Mount/Mounting Surface Stability – Mount the camera in the most stable position. Avoid locations affected by vibrations, such as those caused by a roof-to
Streszczenie treści zawartej na stronie nr. 13
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 13 Watermarking flag set on media item Motion flag set on media item Discovery of storage not completed. If the information about recorded video is not cached, a discovery procedure is started in order find all recorded video. During this time, the “discovery” symbol is shown. While discovery is executed, gaps might be shown in places which the discovery has not yet reached. The gap will automatically be replaced by the tru
Streszczenie treści zawartej na stronie nr. 14
14 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Reference # Description Reference # Description 2 1 Tilts the camera up 8 Focus far 2 2 Tilts the camera down 9 Focus near 2 3 Pans the camera to the left 10 Iris close 2 4 Pans the camera to the right 11 Iris open 5 Pans and tilts the camera in all directions 12 Sets the pre-set shot for the corresponding button 1, 2, 3, 4, 5 or 6 1 6 13 Moves the camera to pre-set shot Zoom out numbers 1, 2, 3, 4, 5, and 6 1 7 Zoom in 1.
Streszczenie treści zawartej na stronie nr. 15
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 15 2. If you want to view a detailed log, click the icon in the top right-hand corner of the relevant field. A new window will open. 2.6.1 Entering a Keyboard Control Command The Aux Control tab is used to enter keyboard control commands. These commands are composed of a command number plus the appropriate function key (Show Shot, Set Shot Aux On or Aux Off). A valid combination either issues a command to the camera or displ
Streszczenie treści zawartej na stronie nr. 16
16 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera 2. Click the Show Shot button. NOTICE! For more information about the AutoDome 700 Series settings and controls, click the Help on this page? link to open the AutoDome 700 Series online help. 2.6.2 Using Intelligent Tracking Intelligent Tracking continuously follows an individual or an object. Intelligent Tracking operates by recognizing an object in motion and zooms-in to approximately 50% of the field of view for an av
Streszczenie treści zawartej na stronie nr. 17
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 17 – Actively tracked object in motion are identified in the video by a blue outline. – When an object in motion is lost, a blue diamond appears designating the area where the target was lost. 2.6.3 Using Special Functions The AutoDome offers several special command buttons on the Livepage. Scan 360 Click this button to start a continuous 360° pan. To stop the continuos pan, click a directional control in the View Control tab
Streszczenie treści zawartej na stronie nr. 18
18 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera 2.9 Processor Load If the AutoDome 700 Series is accessed via the Web browser, you will see the processor load indicator in the top left of the window next to the manufacturer's logo. You can obtain additional information to help when you troubleshoot or fine-tune the unit. The values indicate the proportions of the individual functions on the encoder load, shown as percentages. Move the cursor over the graphic indicato
Streszczenie treści zawartej na stronie nr. 19
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 19 2.10 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page (the Recordings link is only visible if a storage medium has been selected). Selecting Recordings All saved sequences are displayed in a list. A track number is assigned to each sequence. Start time and stop time, recording duration, number of alarms, and recording type are displayed. To play back recorded video sequence
Streszczenie treści zawartej na stronie nr. 20
20 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Set bookmark Jump to the following bookmark Bookmarks are only valid while in the Recordings page; they are not saved with the sequences. All bookmarks are deleted when leaving the page. F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc.
