Instrukcja obsługi Visonik AutophonicsMCT-501

Streszczenie treści zawartej na stronie nr. 1

MCT MCT MCT MCT-501 -501 -501 -501
Installation Instructions
Advanced Acoustic Sensor / PowerCode Transmitter
1 1 1 1. INTRODUCTION . INTRODUCTION . INTRODUCTION . INTRODUCTION
When mounted on opposite wall or adjoining walls, the range is
The MCT-501 combines two modules:
6 m (20 ft) for plate, tempered, laminated and wired glass.
• • • • The Sentrol Inc. ShatterPro™ acoustic sensor with Pattern
When mounted on the ceiling, the maximum range is 6 m (20 ft)
Recognition Technology™ (Prot

Streszczenie treści zawartej na stronie nr. 2

3 3 3 3. INSTALLATION . INSTALLATION . INSTALLATION . INSTALLATION 3.1 Optimizing Detection and Avoiding 3.3 Preparing the Unit False Alarms A. Use a screwdriver to separate the cover For best detection, avoid installing in: from the base, as ! Rooms with lined, insulating, or sound deadening drapes. shown in Figure 4. ! Rooms with closed wooden window shutters inside. You will find inside a For best false alarm immunity: nylon bag with the ! Avoid 24-hour loop applications (perimeter loop O

Streszczenie treści zawartej na stronie nr. 3

The tamper message transmitted as a result (the transmit 3.4 ID Enrollment and Mounting LED blinks) will do the job. Note: It is much easier to enroll the transmitter ID while holding C. Use the base as a template - press it against the wall at the the MCT-501 in your hand, close to the control panel. selected mounting position and mark the drilling points A . Refer to the control panel’s or PowerCode receiver’s through the mounting holes. Drill two holes and attach the installation instructi

Streszczenie treści zawartej na stronie nr. 4

5 5 5 5. MISCELLANEOUS COMMENTS . MISCELLANEOUS COMMENTS . MISCELLANEOUS COMMENTS . MISCELLANEOUS COMMENTS Visonic Ltd. wireless systems are very reliable and are tested to The digital circuitry of this device has been tested and found to high standards. However, due to their low transmitting power and comply with the limits for a Class B digital device, pursuant to Part 15 limited range (required by FCC and other regulatory authorities), of the FCC Rules. These limits are designed to provide re