Instrukcja obsługi SkyLink HA-400

Streszczenie treści zawartej na stronie nr. 1

Page 1 of 3
Model HA-400

Deluxe Home Monitoring Kit
3. MOTION SENSOR INSTALLATION
1. INTRODUCTION
The Deluxe Home Monitoring Kit is designed to monitor movement or any MOUNTING
door and window around your house. The motion sensor can be placed either
A ball-head joint is necessary to mount the sensor at a desire location.
indoor or outdoor. Once motion is detected or a window/door is opened, the
A height of 7 ft is recommended, depending on your application. Once a
receiver will ash alon

Streszczenie treści zawartej na stronie nr. 2

Page 2 of 3 4. PROGRAMMING WINDOW/DOOR SENSOR 5. WINDOW/DOOR SENSOR INSTALLATION ® The sensor must be programmed to the Household Alert Lon g Ran ge The transmitters should be mounted on the door frame or window frame Receiver before they can communication. You may program the sensor by double sided tape. The magnet should be mounted on the door or to one of the 4 zones. Follow the instructions below; window by either double sided tape or screws. Make sure the magnet is 1. Plug in an AC adapt

Streszczenie treści zawartej na stronie nr. 3

Page 3 of 3 ® 6. OPERATION (CONT) 8.OTH ERHOUSEHO LD ALERT SENSORS The Household Alert Long Range Receiver can work with up to 4 Mute ® di sensors: garage door monitor sensor, door / window sensor, When a sensor is triggered for a long period of time, you may stop the water sensor, indoor/outdoor motion sensor, etc. Please visit buzzer by pressing the mute button. When another signal comes again, www.skylinkhome.com or contact us at support@skylinkhome.com for you can disable the buzzer for al