Instrukcja obsługi Linear XR-1

Streszczenie treści zawartej na stronie nr. 1

1. PRODUCT DESCRIPTION 2. OPEN RECEIVER
WARNING: THIS
PRODUCT SHOULD NOT Linear’s Xtended Range FM receivers and transmitters are designed for use in various
XR-1
BE USED IN LIFE wireless remote control applications. When the Model XR-1 receiver detects a signal from
SAFETY APPLICATIONS. its companion transmitter, it will verify the digital code, activate its output, and trigger the
remote device connected to the receiver.
FCC Rules allow
XTENDED RANGE unlicensed high-power
The XR-1 receiver

Streszczenie treści zawartej na stronie nr. 2

6. SET RECEIVER SWITCHES 7. CONNECT POWER AND OUTPUTS 8. MOUNT ANTENNA AND ROUTE CABLE ANT-1A USE ANT-1A ANTENNA OPTION SWITCH ANTENNA USE 18-24 AWG WIRE FOR SHORT RANGE (LESS CHANNEL TO RECEIVE STATUS REPORTS TO CONNECT POWER THAN 1 MILE) SWITCH 1 SWITCH 2 CH # OPTION SWITCH 3 AND OUTPUTS OFF OFF CH 1 NO STATUS REPORTS APPLICATIONS CON-180A OFF ON OFF CH 2 REQUIRED FROM TX STRAIGHT STATUS REPORTS OFF ON CH 3 ON CONNECTOR REQUIRED FROM TX ON ON CH 4 CON-180A + CON-90A SET SWITCHES 1 & 2 IN TH