Streszczenie treści zawartej na stronie nr. 1
K3522V2 6/04 Rev A
Streszczenie treści zawartej na stronie nr. 2
– 2 –
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS How User Codes Affect the Common SYSTEM OVERVIEW ............................5 Lobby ........................................................25 General .......................................................5 CHECKING FOR OPEN ZONES ......... 26 A Partitioned System ..................................6 Zones..........................................................6 Using the T READY Key.......................26 Fire Protection .........................................
Streszczenie treści zawartej na stronie nr. 4
PANIC KEYS........................................ 38 TESTING THE SYSTEM (TO BE Using Panic Keys .....................................38 CONDUCTED WEEKLY) ..................53 SPEED KEY (MACROS)...................... 39 Using the 5 TEST Key .........................53 General Information..................................39 Testing Your System ................................53 Defining ....................................................39 FIRE ALARM SYSTEM ........................54
Streszczenie treści zawartej na stronie nr. 5
System Overview General Your Honeywell security system consists of a main control panel, at least one keypad, and various sensors strategically positioned throughout the premises. The system offers you three forms of protection: burglary, fire and emergency. The keypad provides full control of system operation. The system uses microcomputer technology to monitor all protection zones and system status and provides appropriate information for display on the keypad(s) used with the system
Streszczenie treści zawartej na stronie nr. 6
System Overview (cont’d) A Partitioned System Simply stated, a partitioned system shares one physical alarm system among different users, each with their own requirements. For the most part, you as a user need not know about other users and their structure in the system, but from time to time, you may see display messages which indicate the system is in use by another user. Do not be concerned, this is normal. Refer to the ACCESSING OTHER PARTITIONS section for additional information.
Streszczenie treści zawartej na stronie nr. 7
System Overview (cont’d) Burglary Protection The burglary protection portion of your system must be turned on or "armed" before it will sense burglary alarm conditions. Your system provides four modes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to BYPASS selected zones of protection while leaving the rest of the system armed. The system also provides a CHIME mode, for alerting users to the opening and closing of doors and windows while the system is dis
Streszczenie treści zawartej na stronie nr. 8
System Overview (cont’d) Speed Key (Macros) The system can store a string of up to 32 keystrokes, which can be activated anytime by simply pressing the “A, B, C, or D” keys. This feature can be used to make it easy to perform multiple functions at once (such as going to another partition to bypass a zone), or it can be used to simplify an everyday, repeated procedure. Refer to the SPEED KEY section for procedures for using this feature. Using Schedules Your system may have been progra
Streszczenie treści zawartej na stronie nr. 9
System Overview (cont’d) Master Keypad Operation A "Master" keypad is one on which the status of all 8 partitions is displayed simultaneously. A user can get more information about a certain partition by simply entering [✳] + the desired partition number. To log on to the "Master" partition (3 for the VISTA-32FB; 9 for the VISTA-128FB) using the GOTO command, and to perform any functions at a Master keypad, a user must have access to all partitions. Self-Help Feature Abbreviated use
Streszczenie treści zawartej na stronie nr. 10
About The Keypads General IMPORTANT: If the keypad beeps rapidly upon entering the premises, it indicates that an alarm has occurred during your absence. LEAVE IMMEDIATELY and CONTACT THE POLICE from a safe location nearby. Your keypads allow you to control all system functions. The keypads feature a telephone style (digital) keypad and a Liquid Crystal Display (LCD) that shows the nature and location of all occurrences. Keypad display back lighting is programmable to always stay on o
Streszczenie treści zawartej na stronie nr. 11
Functions Of The Keypad LCD DISPLAY SPEAKER ARMED 1 OFF 2 AWAY 3 STAY READY 4 MAX 5 TEST 6 BYPASS LEDS SUPER INSTANT CODE CHIME 7 8 9 TROUBLE READY 0 # FUNCTION KEYS IMPORTANT! When using the keypad to enter codes and commands, sequential key depressions must be made within 3 seconds of one another. If 3 seconds elapses without a key depression, the entry is aborted and must be repeated from its beginning. – 11 – 6160CR-003-V1
Streszczenie treści zawartej na stronie nr. 12
Functions Of The Keypad (cont’d) ALPHA DISPLAY WINDOW: A 2-line, 4 MAXIMUM : Arms in manner similar 32-character Liquid Crystal Display (LCD). to AWAY mode, but eliminates the entry Displays protection point identification and delay period, thus providing maximum system status, messages, and user protection. An alarm will occur instructions. immediately upon opening any protection 1 OFF : Disarms the burglary portion of point, including entry delay zones. the system, silences
Streszczenie treści zawartej na stronie nr. 13
Functions Of The Keypad (cont’d) LED SUPER INDICATOR: (GREEN) Lit ✳ READY : When depressed prior to when a supervisory condition exists in the arming the system, the keypad will display system. all open protection zones within the LED TROUBLE INDICATOR: (RED) Lit keypad’s home partition. This key is also when a trouble condition exists in the used to display all zone descriptors that system. have been programmed for your system, by SPEAKER: Source of audible internal holding
Streszczenie treści zawartej na stronie nr. 14
Entry/Exit Delays General Information Your system has installer-programmed time delays, known as exit delay and entry delay. Whenever you arm your system, exit delay gives you time to leave through the designated exit door without setting off an alarm. Exit delay begins immediately after entering any arming command, and applies to all modes of arming protection. If programmed, a slow beeping will sound throughout the exit delay period. Entry Delay gives you time to disarm the system wh
Streszczenie treści zawartej na stronie nr. 15
Security Codes & Authority Levels General Information At the time of installation, you were assigned an authority level and a personal four-digit security code, known only to you and yours. The security code must be entered when arming and disarming the system. The authority level defines the system functions that you can perform. As an additional safety feature, other users that do not have a need to know your code can be assigned different security codes, and each user can be given
Streszczenie treści zawartej na stronie nr. 16
Security Codes & Authority Levels (cont’d) Authority Levels Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are certain system functions you may be prohibited from performing. In summary, there are six authority levels, each having certain system restrictions as shown below. Level 1 Master: Can perform all system functions in assigned partitions, and can add, delete or change Manager and Operator level users.
Streszczenie treści zawartej na stronie nr. 17
Security Codes & Authority Levels (cont’d) General Rules on Authority Levels and Changes • A user may not delete or change the user code of the SAME or HIGHER authority than which he is assigned. • A user may only ADD users to a LOWER authority level. • A user may assign access codes only to those partitions to which the user adding the code has access. (ex. a user with access to only partition 1 cannot assign codes in partition 2.) • The only way to assign a user’s authority level is
Streszczenie treści zawartej na stronie nr. 18
Security Codes & Authority Levels (cont’d) To Add a User IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know (e.g. bypassing protection zones). CODE 1. Enter Master or Manager code and press the 8 key. 2. Enter the new user’s 3-digit User Number (002-150). 3. Enter 4-digit security code for that user. The following prompts will appear. Enter 1 to add a new user code. Entering 0 will ADD NEW USER? change the existing user’s code
Streszczenie treści zawartej na stronie nr. 19
Security Codes & Authority Levels (cont’d) If you as a user have access to other partitions, the MULTI-ACCESS ? keypad will prompt for ability of this new user to 0 = NO , 1 = YES access (GOTO) those partitions. Press 0 (NO) or 1 (YES). If no, the system activates this user code and exits “Add a User” mode. If yes, the keypad prompts for the Global Arm option for this user. Press 1 (YES) if this user will be allowed to try to GLOBAL ARM ? arm more than one partition at the same time
Streszczenie treści zawartej na stronie nr. 20
Security Codes & Authority Levels (cont’d) To Change a User’s Code CODE 1. Enter Master or Manager code and press the 8 key + user number to be changed. 2. Enter the new code for that user. The system will recognize that the user number is ADD NEW USER? already in use and will prompt whether or not this 0 = NO , 1 = YES is a new user. Enter 0 to change the existing user’s code to the code entered in step 3. The system will confirm that the change is allowed USER 002 CHA
