Streszczenie treści zawartej na stronie nr. 1
T T4256 4256
www www. .fi fi sher sher- -price.com price.com
Streszczenie treści zawartej na stronie nr. 2
Important! DANGER To prevent electric shock, do not immerse in water; wipe clean with damp cloth. WARNING To prevent strangulation with power cord, never place transmitter (camera) within reach of child. CAUTION This product cannot replace responsible adult supervision. 2
Streszczenie treści zawartej na stronie nr. 3
Important! • Fully charge the camera and parent unit (each with a battery pack installed) for four hours before fi rst-time use. • For proper setup and use, please read these instructions. • Please keep this instruction sheet for future reference, as it contains important information. • Camera operates on AC current (use enclosed docking station) or 6V NiMH rechargeable battery pack (included). Parent unit operates on AC current (use enclosed AC adaptor/charger) or 3.6V NiMH rechargeable batte
Streszczenie treści zawartej na stronie nr. 4
Features 3 4 5 1 2 Parent Unit 11 4 9 8 7 6 10 Side View Back View 4
Streszczenie treści zawartej na stronie nr. 5
Features Power Button and L.E.D. – Press to turn parent unit power ON or OFF. The power button lights when 1 parent unit power is ON. On-Screen Menu Bar – Displays the parent unit battery indicator and nap timer. Flip to vertical view 2 to see the battery indicators for both the parent unit and camera, nap timer, clock and range. 2.4" Video Screen 3 Sound Lights – Let's you "see" baby's sounds. 4 Internal Antenna – For best reception, do not block the internal antenna. 5 Vol
Streszczenie treści zawartej na stronie nr. 6
Features 16 15 14 13 16 Camera 6
Streszczenie treści zawartej na stronie nr. 7
Features Camera Lens 12 Power Button and L.E.D. – Press to turn camera power ON or OFF. The power button lights when 13 camera power is ON. Microphone 14 Night Vision L.E.D.s 15 Docking Station – Use to charge the camera battery. 16 7
Streszczenie treści zawartej na stronie nr. 8
Wall Mount Parts Wall Mount Bracket Cord Wrap Fasteners Shown Actual Size Wall Anchor – 4 #8 x 2" Screw – 4 8
Streszczenie treści zawartej na stronie nr. 9
Charging the Battery (Inside the Camera) IMPORTANT! Fully charge the camera (with battery pack inside) for four hours before fi rst-time use. • Fit the camera into the docking station. • Plug the docking station power cord into a standard wall outlet. Notes: If power fl ow to the wall outlet is controlled by a switch, make sure the switch is “ON”. Use the docking station power cord only in a wall outlet. Do not plug the docking station power cord into a ceiling outlet. To connect to a supply tha
Streszczenie treści zawartej na stronie nr. 10
Charging the Battery (Inside the Parent unit) IMPORTANT! Fully charge the parent unit (with battery pack inside) for four hours before fi rst-time use. DC Input Jack • Use only the included AC adaptor/charger! Do not use any other adaptor/charger. • Fit the AC adaptor/charger pin into the DC input jack on the parent unit. • Plug the AC adaptor/charger into a standard wall outlet. Notes: If power fl ow to the wall outlet is controlled by a switch, make sure the switch is “ON”. Use the AC adaptor
Streszczenie treści zawartej na stronie nr. 11
Testing Sound/Video Reception Test camera transmission and parent unit reception before installing the wall mount bracket and cord wrap (if used) and each time you change location of use. Camera Power Button Radio • Place the camera in the room where you intend to use it. • Point the camera toward the area you will be monitoring. Adjust the camera angle by rotating the camera up or down. • If using AC power, fi t the camera into the docking station and plug the power cord into a wall outle
Streszczenie treści zawartej na stronie nr. 12
Testing Sound/Video Reception Internal Antenna Parent Unit Sound Lights Power Button • Place the parent unit in the room where you intend to use it. • Press the power button on the front of the parent unit to turn power ON. The button lights. • Adjust the parent unit orientation or location for best reception. • When sound is picked up by the parent unit, the sound lights will turn on. - One or two lights indicate quieter sounds. - Three or more lights indicate louder sounds. • If you cannot
Streszczenie treści zawartej na stronie nr. 13
Camera Wall Mount Installation WARNING To prevent strangulation with power cord, never place transmitter (camera) within reach of child. IMPORTANT! Test the reception of the monitor before installing the wall mount bracket and cord wrap. Use the assistance of one adult to hold the camera against the wall in the spot you want to install it. Then, test the reception of the parent unit in several locations around your house. Please refer to the Test- ing Sound/Video Reception section of these in
Streszczenie treści zawartej na stronie nr. 14
Camera Wall Mount Installation 6 6 ft. ft. • To provide the greatest viewing range, we recommend you install the wall mount bracket at least six feet from the fl oor. • Make sure the camera lens does not have an obstructed view of your baby. Adjust the camera up or down. • Allow adequate ventilation of the camera when mounted. Do not mount the camera above heating vents or other heat producing sources. Do not mount the camera where it can receive direct sunlight. • Install the wall mount brac
Streszczenie treści zawartej na stronie nr. 15
Camera Wall Mount Installation Wall Mount Bracket 1 • Hold the wall mount bracket against the wall in the location you want to install it. Make sure the wall mount bracket is straight. • Using a pencil, make a mark on the wall inside the upper hole and lower hole on the wall mount bracket. • Set the wall mount bracket aside. 2 • Using a ¼" drill bit, drill one hole through each pencil mark you made on the wall. 15
Streszczenie treści zawartej na stronie nr. 16
Camera Wall Mount Installation Wall Anchor 3 • Fit a wall anchor into each of the drilled holes. • Tap each wall anchor lightly with a hammer until the ends of each wall anchor are even with the surface of the wall. 4 • Align the holes on the wall mount bracket with the wall anchors. • Insert two screws into the holes in the wall mount bracket and tighten with a Phillips screwdriver. Do not over-tighten. 16
Streszczenie treści zawartej na stronie nr. 17
Camera Wall Mount Installation Wall Mount Bracket Cord Wrap 5 • Position the cord wrap against the wall, so that it is centered below the wall mount bracket and as close to the fl oor as possible. • Move the cord wrap approximately ½" towards the wall outlet. • Using a pencil, make a mark on the wall inside both holes in the cord wrap. • Set the cord wrap aside. 17
Streszczenie treści zawartej na stronie nr. 18
Camera Wall Mount Installation 6 • Using a ¼" drill bit, drill one hole through each pencil mark you made on the wall. Wall Anchor 7 • Place a wall anchor into each of the drilled holes. • Tap each wall anchor lightly with hammer until the ends of each wall anchor are even with the surface of the wall. 18
Streszczenie treści zawartej na stronie nr. 19
Camera Wall Mount Installation Cord Wrap 8 • Align the holes on the cord wrap with the wall anchors. • Insert two screws into the holes in the cord wrap and tighten with a Phillips screwdriver. Do not over-tighten. Camera Docking Station 9 • Fit the camera into the docking station. • Slide the camera docking station into the wall mount bracket. 19
Streszczenie treści zawartej na stronie nr. 20
Camera Wall Mount Installation IMPORTANT! Make sure there is no slack in the cord. Use the cord wrap. Groove Lever Cord Wrap 10 IMPORTANT! Make sure the cord is taught between the camera docking station and cord wrap. Excess cord can form loops or extend into the crib and present a strangulation hazard. • Extend the docking station power cord straight down the wall to the cord wrap. • Wrap the docking station power cord around the cord wrap, leaving just enough to reach the wall outlet. Mak
