Streszczenie treści zawartej na stronie nr. 1
IVMD 1.0
Intelligent Video Motion Detection
en Configuration Instructions
Streszczenie treści zawartej na stronie nr. 2
Copyright This manual is copyright protected by Bosch Security Systems. All rights reserved. No part of this document may be reproduced or transmitted for any purpose, by whatever method and by whatever means, electronically or mechanically, without the express written permission of Bosch Security Systems. Issue: April 2006 (Software version 1.0) © Copyright 2006 Bosch Security Systems Note This manual has been prepared with all due care and all information contained in it has been thoroug
Streszczenie treści zawartej na stronie nr. 3
IVMD | Configuration instructions Table of Contents | en 1 Table of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1.1 Requesting the Activation Key . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2 Limitations . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 4
2 en | Table of Contents IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Systems
Streszczenie treści zawartej na stronie nr. 5
IVMD | Configuration instructions Introduction | en 3 1 Introduction IVMD (Intelligent Video Motion Detection) is a software algorithm that detects movements of objects within an environ- ment monitored by a video camera and generates alarm events that can be processed further in a CCTV system. IVMD makes it possible to capture and evaluate directional movement of objects, thereby largely preventing false alarms. IVMD adapts automatically to changing environmental condi- tions and is therefor
Streszczenie treści zawartej na stronie nr. 6
4 en | Introduction IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Systems
Streszczenie treści zawartej na stronie nr. 7
IVMD | Configuration instructions Requirements | en 5 2 Requirements You will need the Configuration Manager software to configure IVMD. This must be installed on a Windows PC that can commu- nicate with the respective device over a network. 2.1 License When you purchase IVMD you are given an Authorization Num- ber. Together with the Installation code, which you can find in the Web browser view, you generate the Activation Key on our Internet platform. This key is then entered in the Web brow
Streszczenie treści zawartej na stronie nr. 8
6 en | Requirements IVMD | Configuration instructions 2.1.1 Requesting the Activation Key 3. Connect to the Internet on a PC and open this page in a Web browser: – https://activation.boschsecurity.com/ (this page always appears in English) You will see the BOSCH Security Systems License Man- ager. 4. If you already have an account, log in. You can create a new account if you wish. One of the bene- fits of an account is that you can list all of your previous license activations. You can also co
Streszczenie treści zawartej na stronie nr. 9
IVMD | Configuration instructions Requirements | en 7 9. If you have clicked the Email Activation Key link, you will see a dialog in which you can enter two e-mail addresses for recipients. 10. Open the Web browser view of the device again. 11. Select SETTINGS > Service settings > Licenses again. 12. Enter the Activation key – copy&paste is supported. 13. Click Set to save the Activation key. A window tells you that installation was successful. 14. Close the window. IVMD is now activated. Th
Streszczenie treści zawartej na stronie nr. 10
8 en | Requirements IVMD | Configuration instructions If the image consists to a certain extent of nothing but moving objects – in other words if objects cannot be distinguished from each other or from the background – the motion of an indi- vidual object cannot be detected (e.g. individuals in a large crowd). If a very large number of objects are detected, a lot of comput- ing power will be required – this will reduce the power that is available for the transmission of live video data. If n
Streszczenie treści zawartej na stronie nr. 11
IVMD | Configuration instructions Configuration | en 9 3 Configuration IVMD can only be configured with the Configuration Manager. The Configuration Manager can be installed on any Windows PC. NOTE! The system requirements and operation of the Configuration Manager are described in the Installation and Operating Manual i for the Configuration Manager. You can access online help for the software by selecting Help > Index when you are in the Configuration Manager. 1. Start the Configuration
Streszczenie treści zawartej na stronie nr. 12
10 en | Configuration IVMD | Configuration instructions 3.1 VCA tab (Video content analysis) The camera image appears on the right. You see an individual image that is refreshed at regular intervals. As soon as the anal- ysis is activated, meta data is generated and depending on the configuration the additional information is overlaid on top of the image – an object bounding box for example. 1. Move the camera to the required position. NOTE! All of the settings you make relate to the selecte
Streszczenie treści zawartej na stronie nr. 13
IVMD | Configuration instructions Configuration | en11 Alarm state This field shows whether IVMD has generated an alarm event with the current settings. Object markings Objects that generate an alarm event under the current settings appear on the camera image inside a red outline. Objects that are detected as moving but do not generate an alarm event under the current settings appear inside a yellow outline. Object (yellow) (No alarm event generated) Object (red) (Alarm event generated) NOTE
Streszczenie treści zawartej na stronie nr. 14
12 en | Configuration IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Systems
Streszczenie treści zawartej na stronie nr. 15
IVMD | Configuration instructions Area settings | en 13 4 Area settings 4.1 The basics The camera 'sees' a selected area that is displayed as a single, constantly refreshed image. Objects Objects are typically people or vehicles moving within the area seen by the camera. Objects can be filtered according to cer- tain properties (size, direction of movement, speed, location). An alarm event can be generated if objects match certain parameters. Objects that do not match the criteria you defi
Streszczenie treści zawartej na stronie nr. 16
14 en | Area settings IVMD | Configuration instructions Calibration If you wish to filter out objects according to their size or speed, for each camera position a link must be made between the size of the real-life situation and the dimensions as they appear on the camera image. For example, you must tell the software that an object that appears on the camera image with a height of 50 pixels is around 2 m high in reality. The camera angle is used to compute object speeds. The calibration m
Streszczenie treści zawartej na stronie nr. 17
IVMD | Configuration instructions Area settings | en 15 4.2 The Area settings window If you have previously reset all the settings to their defaults, the Area settings window will display a square detector field that covers almost the entire image: NOTE! All configuration commands can be found in context menus. A context menu provides different commands depending on, for example, whether you right click inside or outside a detector i field. The Area settings window can be enlarged by dragg
Streszczenie treści zawartej na stronie nr. 18
16 en | Area settings IVMD | Configuration instructions 4.2.1 Detector field Detector fields are displayed as framed areas with a grid pat- tern. The particular status of a detector field is indicated by the different colors: Green field Detector field in which no object that gener- ates an alarm event was detected. Light green Detector field is clicked and activated for edit- ing. Green Mouse cursor is over the detector field; right click to see the context menu for the detector field. Dark
Streszczenie treści zawartej na stronie nr. 19
IVMD | Configuration instructions Area settings | en 17 Moving the mouse cursor over a node highlights it more brightly: – You can reposition the node using drag&drop. – You can delete the node using the context menu. Moving the mouse cursor over a side highlights it more brightly: – You can reposition the side using drag&drop. – You can insert a node using the context menu. Up to 16 detector fields each with up to 16 nodes can be cre- ated for each camera image. For each detector field you can
Streszczenie treści zawartej na stronie nr. 20
18 en | Area settings IVMD | Configuration instructions 4.2.2 Detector field context menu Overview of commands: Cut Deletes the detector field – the field is copied to the clipboard and can be inserted again if required. Copy Copies the field to the clipboard. Insert Node Inserts a node on the side over which the mouse cursor is positioned. Delete Node The node on which the mouse cursor is positioned is deleted. Statistics Shows the statistics for the detector field (Section 4.6 Statistics,
