Streszczenie treści zawartej na stronie nr. 1
D1265
Owner's Manual
EN Touchscreen Keypad
Streszczenie treści zawartej na stronie nr. 2
D1265 | Owner's Manual Contents This system includes a telephone line seizure feature. The system might be programmed to communicate with a central monitoring station to report system events. You cannot use your phone while the system is communicating with the central monitoring station. In the unlikely event that the central station is not able to receive the report, your phone might be unavailable for up to 20 minutes while the control panel makes additional communication attempts.
Streszczenie treści zawartej na stronie nr. 3
D1265 | Owner's Manual | Contents Turning On the System (Arming) With Doors or Windows Open .............................................................. 17 Contents Master Arm (CMD + 1)................................................ 19 Introduction.....................................................................6 Description...................................................................... 19 Your Keypad.....................................................................6 U
Streszczenie treści zawartej na stronie nr. 4
D1265 | Owner's Manual | Contents Change Time/Date (CMD + 4 + 5).............................37 User (Passcode) Worksheet (User 000 to 038)............ 69 Door Control (CMD + 4 + 6).......................................39 User (Token) Worksheet (User 000 to 038) D9412GV3/D7412GV3/D9412GV2/D7412GV2 Only Description......................................................................39 ......................................................................................... 70 Using
Streszczenie treści zawartej na stronie nr. 5
D1265 | Owner's Manual | Figures Figures Figure 1: D1265 Touch Screen Numerical...............6 Figure 2: Smoke Detector Locations (Plan View)..85 Figure 3: Smoke Detector Locations (Elevation View)........................................85 Figure 4: Escape Route.............................................85 Tables Table 1: D1265 Keypad Buttons ..............................7 Table 2: Keypad Commands..................................15 Table 3: Door Status ..........................
Streszczenie treści zawartej na stronie nr. 6
D1265 | Owner's Manual | Introduction Introduction Your security system helps to secure life, property, and investments against fire, theft, and bodily harm. The D1265 Touchscreen Keypad is an SDI compatible device that works with GV2/GV3 Series Control Panels. Each keypad has an illuminated touchscreen to display system messages and graphics buttons for data or command entry, and a sounder that emits eight warning tones. Your Keypad The D1265 keypad uses up to four rows of 20 cha
Streszczenie treści zawartej na stronie nr. 7
D1265 | Owner's Manual | Part I: Security System Basics Part I: Security System Basics Using the keypad Pressing the Previous or Next button while in the Your security system provides quick access to functions Menu List allows you to scroll through the list of by pressing the CMD button and one or two additional functions enabled and programmed by your security buttons. company. Pressing press the button for the function you wish to perform. Another way to access functions is
Streszczenie treści zawartej na stronie nr. 8
D1265 | Owner's Manual | Part I: Security System Basics Fire Points Fire points exclusively monitor fire detection devices. They are always armed and cannot be disarmed. You can clearly distinguish fire points from other non-fire points at the keypad. When there is a fire alarm, the display shows the following: *FIRE ALARM* is shown on the first line, text identifying the point as a fire point is shown on the second line, and instructions for silencing the alarm are shown on the t
Streszczenie treści zawartej na stronie nr. 9
D1265 | Owner's Manual | Part I: Security System Basics Your Custom Display “At an idle state” means that the system is not currently performing a function entered by a user. There are three idle states the system might be in: Turned on (Armed) Turned off (Disarmed) with no points faulted (doors or windows open) in the area Turned off with faulted points (doors or windows open) in the area. This manual uses the default idle state shows for examples of these idle states. Your secur
Streszczenie treści zawartej na stronie nr. 10
D1265 | Owner's Manual | Part I: Security System Basics View Faulted or Bypassed Points Warning Displays and Tones To properly arm your system, all the exterior points Your keypad emits one of several distinct tones and (doors and windows) and interior points (motion displays custom text to alert you to system events. sensors, inside doors, and so on) in the system must be Additional bells or sirens might also be connected to in the normal (not faulted) condition. Viewing the your system
Streszczenie treści zawartej na stronie nr. 11
D1265 | Owner's Manual | Part I: Security System Basics Fire Alarms Fire alarms are the highest priority events. When a fire point activates, your keypad emits a pulsating high- pitched fire tone. Evacuate all occupants and investigate for smoke or fire. Ensure that all occupants know the difference between the burglary tone and the fire tone. The tone sounds for the time set by your The display shows the instructions for clearing the security company. message. Enter a valid passc
Streszczenie treści zawartej na stronie nr. 12
D1265 | Owner's Manual | Part I: Security System Basics Burglary Alarms Fire Trouble and Fire Supervisory Events Burglary alarms are the second priority. When a When a fire trouble or fire supervisory condition burglary point activates while your system is armed, occurs, your keypad emits three warble tones, then a your keypad emits a steady high-pitched burglary tone. pause (repeatedly). The tone sounds for the time set by your security The system shows the number of fire points that
Streszczenie treści zawartej na stronie nr. 13
D1265 | Owner's Manual | Part I: Security System Basics Entry Delay Tone and Display Non-Fire Trouble and Supervisory Events When you enter an armed system through a point When a trouble event occurs, your keypad might be programmed for entry delay, the keypad emits a programmed to emit three warble tones, then a pause repeating warble tone and displays a warning that the (repeatedly). area is in entry delay. This display alternates with one If the system was armed, the keypad displ
Streszczenie treści zawartej na stronie nr. 14
D1265 | Owner's Manual | Part I: Security System Basics How Your System Reports Alarms Your security system might be programmed to automatically seize your telephones when sending reports to your security company. Once the report is completed, your security system restores the telephone line to normal operation (check with your security company). Other methods of communicating alarm conditions are also available. Please consult your security company for services available in your are
Streszczenie treści zawartej na stronie nr. 15
D1265 | Owner's Manual | Part II: System Commands Table 2: Keypad Commands Part II: System Commands Some of these functions might not be COMMAND Function available in your system. Please consult Master Arm your security company to determine which commands have been made available to Master Arm Instant + you. Perimeter Instant If you attempt to enter a function that is not available Perimeter Delay or if the function is available in the system but your passcode is
Streszczenie treści zawartej na stronie nr. 16
D1265 | Owner's Manual | Part II: System Commands Turning the System Off (Disarming) Passcode Protected Commands and Entering your personal passcode turns off your security Functions system. When the system is turned on, you must enter Commands and/or Functions within your system through a designated entry door to prevent an instant might be programmed to require a valid passcode alarm condition. Opening the door starts entry delay prior to gaining access to that function. This ensu
Streszczenie treści zawartej na stronie nr. 17
D1265 | Owner's Manual | Part II: System Commands Turning On the System (Arming) With a Turning On the System (Arming) With Duress Passcode Doors or Windows Open Your passcode might have a special duress feature that If a protected door or window is open, you might have can be your personal passcode with its last digit the option of “force arming” with that point faulted. increased by one or two digits. Alternately, some Faulted points (opened doors or windows) that are systems might ha
Streszczenie treści zawartej na stronie nr. 18
D1265 | Owner's Manual | Part II: System Commands 6. Once the last bypassed point is shown, the display changes to show the button to either force arm the faulted points (Force Arm) or force arm the faulted/bypassed points (Force/Bypass Arm). This display indicates that more than the number of allowable points are faulted. Bypassed points are counted as faulted. Your system’s maximum number of bypassed and/or force armed points is set by your security company. Check with them t
Streszczenie treści zawartej na stronie nr. 19
D1265 | Owner's Manual | Part II: System Commands 5. If your system is programmed to require a Master Arm (CMD + 1) passcode when performing a CMD 1, the Description display prompts you to enter your passcode. Use this function to turn on both the perimeter and The passcode is shown as asterisks (*). interior of a single area indicated on the first line (top) of the keypad display. When you turn the system on, the display shows how many seconds of exit delay time you have to exit th
Streszczenie treści zawartej na stronie nr. 20
D1265 | Owner's Manual | Part II: System Commands Master Arming all Areas 9. To arm all available areas, press the Arm button when the display reads Master Arm All. If you prefer, you might use the Master Arm command in the function list. Press the Menu button to access the function list configured in the keypad. 1. Ensure your keypad shows idle text. The display changes to show that all authorized areas are arming. The display shows Exit Now! # (# = exit delay time remaining).
