Streszczenie treści zawartej na stronie nr. 1
SOUL CALIBUR ll
Game PCB Kit
Connections
and
Adjustments
Part No 90500138 Issue 1
Streszczenie treści zawartej na stronie nr. 2
Page 2
Streszczenie treści zawartej na stronie nr. 3
NOTICE is a term to describe a copyright protection technology created by Sony Group. This mark does not necessarily guarantee compatibily with other products bearing the “MagicGate” trademark. is a trademark of Sony Corporation. est une terme décrivant une technique de protection de copyright créée par Sony Group. ne garantit pas nécessairement de compatabilté avec d’autres produits portant la marque de commerce “MagicGate” est une marque de commerce de Sony Corporation. The DVD-ROM DISC s
Streszczenie treści zawartej na stronie nr. 4
Contents KIT CONTENTS ............................................................................................................... 5 1. SPECIFICATIONS .................................................................................................... 7 2. CABINET CONNECTIONS (Standard Jamma).......................................................... 7 3. CABINET CONNECTIONS (JVS Standard)............................................................. 11 4. FITTING THE DONGLE & MEMORY CARD .....
Streszczenie treści zawartej na stronie nr. 5
KIT CONTENTS Do escription Py art N Quantit Soul Calibur 2 PCB Rack Assy X1 SC2-PCB DVD Rom CD Disc X1 SC2-CDROM Jamma (B) PCB X1 TEK4-JAMMA P1 ower Supply Loom R1 GB Video Loom Rack Assy to Jamma (B) PCB connecting cables R1 CA (Phono) Audio Loom D1 ata Loom Amp EI connectors to 48way Edge Adaptor Loom 61 9200067 Amp EI connectors with Flying Leads Loom 61 9200066 Button Decals 1 set Instruction Card 1 Move List Card 1 Title Board 1 Soul Calibur 2 Promotional Poster 1 Top Flash 41 0000736 Unive
Streszczenie treści zawartej na stronie nr. 6
1. SPECIFICATIONS COMPATIBILITY: JAMMA STANDARD (with JAMMA (B) PCB) JAMMA VIDEO STANDARD (JVS) PCB INPUT POWER: +5v (±5%) @ 7A (Min), +12v (±5%) @ 2A (Min) Temperature +5ºC to +45ºC OPERATING Humidity 10% to 85% (no condensation) ENVIRONMENT: MONITOR ORIENTATION Orientation Horizontal (Landscape) AND SIGNAL: Horizontal Frequency 15kHz / 31kHz (selectable) Scanning retrace 15.75 kHz Non-interlace / Interlace 31.5 kHz Non-interlace (fixed) RGB output level At 15 kHZ 0.7V p-p / 3.0V p-p (selectabl
Streszczenie treści zawartej na stronie nr. 7
2. CABINET CONNECTIONS (Standard Jamma) Option Switches NO PCB Rack Assy ON OFF CD-ROM Drive Video Cable Power Cable Audio Cable Data Cable Jamma (B) PCB Volume Control Page 7 1 23 4
Streszczenie treści zawartej na stronie nr. 8
The JAMMA (B) PCB is connected to the game cabinet with a 56way Edge Connector (standard JAMMA) and 4 and 10way AMP EI Connectors. JAMMA (B) PCB JAMMA 56way Connector 10way AMP EI Connector 4way AMP EI Connector Note: Supplied in the Kit is an Amp EI connector to 48way extender card adaptor loom for cabinets with an existing 48way connector, and an AMP EI connector with flying leads loom for cabinets without a 48way connection. 4 and 10way AMP EI Connector with 48way Extender Card Part No. 69200
Streszczenie treści zawartej na stronie nr. 9
Connections for Standard JAMMA Cabinet SOUL CALIBUR 2 SOUL CALIBUR 2 JAMMA 56way Edge Connector 10way AMP EI Connector So older SideTe erminal N Component Sid Pn in No Descriptio GA ND 1 GND GB ND 2 GND 1D GN +C 5volt 3 +5volt 2 +D 5volt 4 +5volt 3 E5 44 P2 Button switch +F 12volt 6 +12volt 5 PG olarizing Key 7 Polarizing Key 6 CH oin Counter 2 8 Coin Counter1 7 J9 84 P1 Button switch LK Speaker (-) 1)0 L Speaker (+ 9 AL udio (-) (mono) 1)1 Audio (+) (mono 1D 0 GN VM ideo GREEN 1D2 Video RE VN i
Streszczenie treści zawartej na stronie nr. 10
Adaptor for Earlier Tekken Series Cabinets with 48way Edge Connector (Part No 69200067) PREVIOUS CABINETS 48way Extension Connector So older SideTe erminalN Component Sid 4) w AMP EIpin 4R4 Speaker (- A4 2B) 2R3 Speaker (+ 4w AMP EIpin A3 23 B2 A2 22 B2 A1 21 B2 P0 olarizing Key A0 2By 2 Polarizing Ke A9 19 B1 A8 18 B1 14 0w AMP EIpin 4P7 2 Button switch A7 1 B1 A6 16 B1 A5 15BD 1 G0 N 10w AMP EIpin1 A4 14BD 1 G0 N 10w AMP EIpin1 A3 13 B1 A2 12 B1 A1 11 B1 A0 10 B1 A9 9 B A8 8BDG1 N 10w AMP EIpi
Streszczenie treści zawartej na stronie nr. 11
3. CABINET CONNECTIONS (JVS Standard) JVS Power Supply Adaptor Video Connector Audio Connectors Data I/O Connector Page 11
Streszczenie treści zawartej na stronie nr. 12
4. FITTING THE DONGLE & MEMORY CARD The dongle and memory card included in this kit is limited to this game only. DO NOT insert this Dongle in other games. Inserting the Dongle in other games may cause damage. Ensure that the power is switched OFF before inserting the Dongle. Dongle cover Pozi head screw (M3x10) 1. Remove 1off pozi head screw (M3x10) and remove the Dongle Cover. 2. Fit the Dongle to the left hand connector. 3. Fit the Memory Card to the right hand connector. Right connector Left
Streszczenie treści zawartej na stronie nr. 13
5. FITTING THE CD-ROM DISC • The CD-ROM Disc must be inserted with the power switched on. To prevent an electric shock, accident or injury, do not touch any parts other than those specified below. • The supplied CD-ROM Disc is designed exclusively for this product. Never use the CD-ROM Disc in any other product. Do not insert other CD-ROM Discs in the CD-ROM drive of this game. • The CD-ROM tray retracts automatically after 10 seconds. 1. Press the eject button of the CD-ROM drive to open the tr
Streszczenie treści zawartej na stronie nr. 14
2. Place the CD-ROM Disc on to the tray, ensuring that the label side (printed surface) is facing away from the Tray. CD-ROM DISC Ensure that the CD-ROM Disc is securely placed on the tray, with the label side facing away from the tray Tray 3. Press the Eject button to retract the Tray in to the unit. 4. Switch the power OFF, wait approx 10 seconds then switch the game back ON. Page 14
Streszczenie treści zawartej na stronie nr. 15
6. ADJUSTMENTS AND SETTINGS The Game PC Board Assy is fitted with 4 Option Switches. Option Switches NO ON OFF The JAMMA (B) PCB has the Volume Control fitted. JAMMA (B) PCB Volume Control 6-1 Option Switches Switch 1 is used to change between Test Mode and Game Mode. ON: Test Mode OFF: Game Mode Switch 2 is used to set the output level of the video signal. 31kHz ON: 0.7V p-p OFF: 0.7V p-p 15kHz ON: 0.7V p-p OFF: 3.0v P-P Switch 3 is used to change the monitor Sync Frequency ON: 31kHz OFF: 15kHz
Streszczenie treści zawartej na stronie nr. 16
6-2 Test Mode To enter Test Mode set the Test switch in the cabinet (if fitted) to ON, or if no Test switch is fitted to the cabinet, set Option switch 1 ON NO Note: The test mode is activated only when the cabinet Test switch or Option switch 1 is moved from OFF to ON. If the game is switched on with either switch in the ON position the Test Mode will not be activated. The switch must be switched OFF and then ON to enter the test mode. When the Test Mode is entered, the following screen is disp
Streszczenie treści zawartej na stronie nr. 17
6-2-1 Display Test This test allows the following checks and adjustments to be made. Colour Edit Adjust contrast and brightness of each colour to match video output from the PCB to the Monitor. Note: This adjustment should only be made if the correct picture quality cannot be achieved by using the normal monitor adjustments. Convergence Check and adjust the size, position and distortion of the screen image. Interlace Check Switches between interlaced and non-interlaced display. (Only with
Streszczenie treści zawartej na stronie nr. 18
6-2-2 Colour Edit 1 Ensure that the Colour Edit Adjustment Box is showing. (Press P1 Button 3 if the Adjustment box is not displayed. 2. Use the Joystick UP/DOWN to step to the required adjustment. (Contrast, Brightness (red), Brightness (green), Brightness (blue)). 3. Use the Joystick LEFT/RIGHT to adjust the value. 3. When all adjustments have been made, press P1 Button 1 to step to the Convergence Test or P1 Start Button to return to the Main Test Menu screen 6-2-3 Convergence Use this screen
Streszczenie treści zawartej na stronie nr. 19
6-2-4 Interlace Interlace Mode: This mode provides more detailed and smoother graphics than the non-interlaced mode. This is achieved by shifting the picture display a half line in the vertical direction every other frame scan, so doubling the vertical resolution without changing the horizontal/vertical frequency. Non-Interlaced Mode: Use this display if the interlace mode results in flicker over the entire screen display. In the non-interlaced mode, there is no shift of the display position, an
Streszczenie treści zawartej na stronie nr. 20
6-2-5 Input Test (switch test) Select Input Test from the Main Test Menu. The following screen is displayed. P2 Start switch P1 Start switch INPUT TEST 1P 2P Start Start Service switch on Service Service the cabinet Up Up (if fitted) Down Down Left Left P1 8-direction joystick Right Right P2 8-direction joystick Button1 Button2 Button3 Button1 Button2 Button3 Button4 - - - - - - - - - - - - Button4 - - - - - - - - - - - - P1 Button switches P2 Button switches DIPsw 1 : OFF 2 : OFF
