Instrukcja obsługi Mitsubishi MotorsF5MR1

Streszczenie treści zawartej na stronie nr. 4

LISTOFEFFECTIVEPAGES Page Revision Date Remarks Page Revision Date Remarks Code Code 21A-0-1 May 1995 22B-3-6 to 22B-3-9 A Nov. 1995 21A-1-1 B May 1996 22B-4-1 F July 1999 21A-2-1 May 1995 22B-4-2 to 22B-4-8 E Jun. 1998 21A-3-1 to 21A-3-3 May 1995 22B-5-1 and 22B-5-2 F July 1999 21A-4-1 and 21A-4-2 May 1995 22B-5-2a and 22B-5-2b F July 1999 22B-5-3 to 22B-5-6 A Nov. 1995 21B-0-1 E Jun. 1998 22B-5-7 G Jun. 2000 Revised 21B-1-1 and 21B-1-2 E Jun. 1998 22B-6-1 to 22B-6-5 E Jun. 1998 21B-2-1 and 21B

Streszczenie treści zawartej na stronie nr. 1

MITSUBISHI
FRONTWHEELDRIVE
MANUALTRANSMISSION(E-W)
WORKSHOPMANUAL
FOREWORD
This Workshop Manual contains procedures
Clutch.........................................
21A
for removal, disassembly, inspection,
F5MR1,F5MR2,F5MR3
adjustment, reassembly and installation, etc.
for service mechanics.
All information, illustrations and product
Clutch.........................................
21B
descriptions contained in this manual are
F5M41,F5M42,W5M42
current as at the time of publication. We,
however,

Streszczenie treści zawartej na stronie nr. 2

INTRODUCTION EXPLANATION OF MANUAL CONTENTS Maintenance and Servicing Procedures (1) A diagram of the component parts is D Removal steps: provided near the front of each section in The part designation number corresponds order to give the reader a better under- to the number in the illustration to indicate standing of the installed condition of removal steps. component parts. D Disassembly steps: (2) The numbers provided with the diagram The part designation number corresponds indicatethesequenc

Streszczenie treści zawartej na stronie nr. 3

INTRODUCTION Indicates the Indicates the Indicates the Indicates the Indicates the group title. section title. group number. section num- page number. ber. Denotes tightening torque. Denotes non-reusable part. Apply gear oil to all This number corresponds to moving parts before the number appearing in installation. “Removal steps”, “Disassembly steps”, “Installation steps” or “Reassembly steps”. Operating procedures, cau- tions, etc. on removal, installa- tion, disassembly and reas- sembly are d