Instrukcja obsługi SkyLink 318KR

Streszczenie treści zawartej na stronie nr. 1

®
Skylink Wireless
Keyless Entry for Garage Doors Model 318KR
1. INTRODUCTION
2. INSTALLATION (CONT)
Plug in the connector end of the Red/Black wire to the 318R
In this package, you will find a keyless entry transmitter with 3V lithium
2
batteries, a garage door receiver, a red / black wire and a clip. receiver. Note the orientation of the male & female connector.
Clip
Garage Door
Receiver
Keyless Entry Transmitter
Red/Black Wire
(Batteries inside)
3 Plug the receiver into an electrical outl

Streszczenie treści zawartej na stronie nr. 2

4. CHANGE THE OPERATION CODE FOR 6. CHANGE PIN BOTH TRANSMITTER AND RECEIVER (BOTH) Follow the instructions below to change the PIN. To change your PIN: You can randomly remove some 1. Enter the current PIN, (factory default PIN 0 0 0 0), press , 2 * 2. Enter new 4 digit PIN, press , connectors, leaving some in place. * 3. Enter new PIN again, press . A connector can be removed with * the clip, as shown. For example, if you are changing the PIN number from 0000 to 1234, enter th