Instrukcja obsługi SkyLink 18R

Streszczenie treści zawartej na stronie nr. 1

®
Skylink Garage Door Receiver
Model 18R
2. INSTALLATION (CONT)
1. INTRODUCTION
Plug in the connector end of the Red/Black wire to the 18R
2
In this package, you will find a garage door receiver and a red / black wire.
receiver. Note the orientation of the male & female connector.
Garage
Door
Receiver
Red/Black Wire
2. INSTALLATION
Plug the receiver into an electrical outlet inside the garage.
3
The following instructions will show you how to install the receiver.
The red light on the receiver

Streszczenie treści zawartej na stronie nr. 2

5. REMOVE TRANSMITTER FROM THE RECEIVER You can delete the transmitter from a receiver. Unplug the receiver from the electrical socket. 1 Press and hold the learn button on the left hand side of the receiver 2 when plugging the receiver into an electrical socket, the red LED on the receiver will flash rapidly. All the transmitters and keypads are deleted. 6. ADDITIONAL TRANSMITTER You can add up to 15 transmitters as you want to control the same receiver. Simply program the ® transmitters to