Streszczenie treści zawartej na stronie nr. 1
Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™
USFF Computer
About Your Monitor Solving Problems
Front View Troubleshooting Your Monitor
Back View General Problems
Side View Product Specific Problems
Bottom View USB Problems
Monitor Specifications Troubleshooting Your Soundbar
Caring for Your Monitor
Using Your Adjustable Monitor Stand
Height Adjustment
Appendix
Tilt Adjustment
CAUTION: Safety Instructions
FCC Identification Information
Setting Up Your Monitor
Contacting Dell
Cab
Streszczenie treści zawartej na stronie nr. 2
Back to Contents Page About Your Monitor Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™ USFF Computer Front View Back View Bottom View Side View Monitor Specifications Caring for Your Monitor Front View 1. Video input select 2. OSD menu / select button 3. Down button 4. Up button 5. Power button (with power light indicator) Back View 1. Dell Soundbar mounting brackets — Attach the optional Dell Soundbar.
Streszczenie treści zawartej na stronie nr. 3
2. Security lock slot — Attach a lock to secure your monitor. 3. Barcode serial number label — Refer to this label if you need to contact Dell for technical support 4. VESA mounting holes (100mm [Behind attached base plate]) — Use to mount the monitor. 5. Stand removal button — Press to release the stand. 6. Regulatory rating label — Lists the regulatory approvals. 7. Thumbscrews — Fasten the chassis to the stand with thumbscrews. Bottom View 1. Power connector - Connect the power cable 2. Dell
Streszczenie treści zawartej na stronie nr. 4
table shows the power consumption and signaling of this automatic power saving feature: VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Normal operation( with Dell Soundbar and USB active) Active Active Active Green 75 W (maximum) Normal operation Active Active Active Green 35 W (typical) Active-off mode Inactive Inactive Blanked Amber Less than 2 W Switch off - - - Off Less than 1 W NOTE: The OSD will only function in the 'normal operation' mode. Otherwise one o
Streszczenie treści zawartej na stronie nr. 5
Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment 1 T.M.D.S. Data 2- 9 T.M.D.S. Data 1- 17 T.M.D.S. Data 0- 2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+ 18 T.M.D.S. Data 0+ 3 T.M.D.S. Data 2 Shield 11 T.M.D.S. Data 1 Shield 19 T.M.D.S. Data 0 Shield 4 No Connect 12 No Connect 20 No Connect 5 No Connect 13 No Connect 21 No Connect 6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield 7 DDC Data 15 self-test 23 T.M.D.S. Clock + 8 No Connect 16 Hot Plug Detect 24 T.M.D.S. Clock - Universal Se
Streszczenie treści zawartej na stronie nr. 6
Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VESA, 720 x 400 31.5 70.0 28.3 -/+ VESA, 640 x 480 31.5 60.0 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 49.5 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108 +/+ VESA, 1280 x 1024 64.0 60.0 135.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ Electrical Video input s
Streszczenie treści zawartej na stronie nr. 7
Environmental Temperature: Operating 5° to 35°C (41° to 95°F) Nonoperating Storage: -20° to 60°C (-4° to 140°F) Shipping: -20° to 60°C(-4° to 140°F) Humidity: Operating 10% to 80% (noncondensing) Nonoperating Storage: 5% to 90% (noncondensing) Shipping: 5% to 90%(noncondensing) Altitude: Operating 3,657.6m (12,000 ft) max Nonoperating 12,192 m (40,000 ft) max Thermal dissipation 256.08 BTU/hour (maximum) 109.261 BTU/hour (typical) Caring for Your Monitor CAUTION: Read and follow the safety instr
Streszczenie treści zawartej na stronie nr. 8
Back to Contents Page Using Your Adjustable Monitor Stand Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™ USFF Computer Height Adjustment Tilt Adjustment Height Adjustment Stand extends vertically 90mm for viewing comfort. Tilt Adjustment 0 0 Viewing angle can be adjusted 4 forward and 21 backwards for viewing comfort. Back to Contents Page
Streszczenie treści zawartej na stronie nr. 9
Streszczenie treści zawartej na stronie nr. 10
Back to Contents Page Setting Up Your Monitor Dell™ 1707FP AIO Color Monitor For Dell™ OptiPlex™ USFF Computer Cable Connections on the Back of the Monitor and the Computer Removing the Cable Cover and Cables from the Computer Detaching the Monitor from the Stand Using the OSD Setting the Optimal Resolution Using the Dell Soundbar (Optional) Cable Connections on the Back of the Monitor and the Computer 1. Attach the monitor to the stand. a) Fit the groove on the back of the monitor o
Streszczenie treści zawartej na stronie nr. 11
3. Tighten the thumbscrews underneath the stand. 4. Connect the DVI cable to the computer. Route DVI cable as shown. NOTE: This cable is shipped attached to the monitor.
Streszczenie treści zawartej na stronie nr. 12
5. Route the monitor power cable through the opening in the bottom of Cable Cover and connect it to the power cord receptacle on the back of the monitor NOTE: The monitor power cable and the cable cover are shipped with the monitor. 6. Route the computer power adaptor cable (shipped with the computer) through the opening in the bottom of Cable Cover and connect it to the computer. Push in until it clicks.
Streszczenie treści zawartej na stronie nr. 13
7. Connect the USB, keyboard and mouse cables to the computer as shown. a) Connect the short USB cable (shipped with monitor) ) to the upstream port of the monitor. Route this cable through the opening on the side of the cable cover. Connect the other end of USB cable to any computer USB down stream port. b) Route the mouse and keyboard cables through the opening in the bottom of Cable Cover and connect to two USB ports on the computer. NOTE: There are four USB ports available on the back of
Streszczenie treści zawartej na stronie nr. 14
b) Connect the computer power cable to the computer power adaptor. c) Plug the power cables of the computer and the monitor into a nearby outlet. 9. (Optional) Install security lock to the cable cover. Power on both monitor and computer. If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting. Removing the Cable Cover and Cables from the Computer 1. Remove the optional security lock (if used). 2. Lift the unlock button in the cable co
Streszczenie treści zawartej na stronie nr. 15
3. Push in the release button on the power cable before removing it from the computer. Detaching the Monitor from the Stand This monitor is VESA compliant for wall mounting, and detaching the monitor from the stand is necessary. Steps for removing the monitor from the stand: 1. Press the stand removal button to release the stand.
Streszczenie treści zawartej na stronie nr. 16
Pick up the bottom of the stand. There are two metal tabs at the top of the VESA plate that insert into the monitor. Pull the bottom of the monitor away from the stand, being careful not to 2. scratch the monitor with the stand. Using the Front Panel Buttons Use the buttons on the front of the monitor to adjust the image settings.
Streszczenie treści zawartej na stronie nr. 17
Use the Input Select button to select between two different video signals that may be connected to your monitor. NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor cannot sense a video signal. Depending upon the selected input, one of the dialogs shown below will scroll continually. Video input select or The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See Using the OSD. OSD menu /
Streszczenie treści zawartej na stronie nr. 18
saved if you change the settings and then wait for the OSD menu to disappear. 1. Push the MENU button to open the OSD system and display the main menu. Main Menu for Analog (VGA) Input Main Menu for Digital (DVI) Input or NOTE: Positioning and Image settings are only available when you are using the Analog (VGA) connector. 2. Push the - and + buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table below for a complete l
Streszczenie treści zawartej na stronie nr. 19
Push the + button to increase luminance and push the - button to decrease luminance (min 0 ~ max 100). Contrast adjusts the degree of difference between darkness and lightness on the monitor screen. Push the + button to increase the contrast and push the - button to decrease the contrast (min 0 ~ max 100). NOTE: When using DVI source, the contrast adjustment is not available. Positioning: Positioning moves the viewing area around on the monitor screen. Horizontal When making changes to either th
Streszczenie treści zawartej na stronie nr. 20
Image settings: The Phase and Pixel Clock adjustments allow you to more closely adjust your monitor to your preference. These settings are accessed through the main OSD menu, by selecting Image Settings. Pixel Clock Use the - and + buttons to make adjustments. (Minimum: 0 ~ Maximum: 100) (Coarse) If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (course) adjustment and then use Phase (fine), again. Phase (Fine) NOTE: This function may change the w
