Streszczenie treści zawartej na stronie nr. 1
WARNING Symbols
This symbol alerts you to dangerous voltage and the risk of electrical
shock.
This symbol identifies important operating and service instructions.
Safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this LCD TV near water.
6) Clean the LCD TV with a dry cloth only. Do not use liquid, alcohol, or aerosol
cleaners.
7) Do not block any ventilation openings. Install your LCD
Streszczenie treści zawartej na stronie nr. 2
17) Do not place the LCD TV where it may be dripped or splashed on, or where objects filled with liquid will be placed near it. 18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the back panel of unit. 19) This product is for entertainment only. Visual display tasks are excluded. 20) When mounting the product on a wall or ceiling, install the product according to the method recommended by the manufacturer. To ensure your safety, use only the manufacturer's appro
Streszczenie treści zawartej na stronie nr. 3
Contents ACCESSORIES................................................................................................................. 1 FRONT PANEL BUTTONS ................................................................................................ 2 BACK PANEL BUTTONS................................................................................................... 3 REMOTE CONTROL.........................................................................................................
Streszczenie treści zawartej na stronie nr. 4
ACCESSORIES Thank you for purchasing this high-performance LCD-TV! This package comes with: LCD TV User’s Guide Warranty Card Remote control Two AA batteries* Power Cord VGA Cable RCA A/V Cable * Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. 1
Streszczenie treści zawartej na stronie nr. 5
FRONT PANEL BUTTONS Volume down (adjust decreases) Volume up (adjust increases) On-Screen Display (OSD) menu button (returns to the previous menu) Scroll down (selects the next channel down) Scroll up (selects the next channel up) Input source selection (serves as the ENTER button) Power on and off switch Power LED indicator and Remote control receiver 2
Streszczenie treści zawartej na stronie nr. 6
BACK PANEL BUTTONS A B C D E F G H I J K A Power receptacle (for AC input) B Headphone jack C PC Audio input D VGA (15-pin) signal input from a computer E YPbPr and High Definition (HD) component video input F S-Video input G YPbPr/ DVI signal Audio input (left/right) H AV/ S-Video signal Audio input (left/right) I Composite Video input J HDMI signal input (supports HDCP or a PC) K RF antenna and cable TV input 3
Streszczenie treści zawartej na stronie nr. 7
REMOTE CONTROL 4
Streszczenie treści zawartej na stronie nr. 8
Remote control button function as follows: 1 INPUT Selects input source 2 ENTER Confirm selection or enter selected menu 3 TV Switches to TV from any other source 4 - VOL + Adjusts the volume up and down 5 LIST Select channel from program list 6 GUIDE Select electronic program guide (EPG) 7 0~9, - number Change the channel 8 POWER Powers on and off 9 UP/ DOWN/ LEFT/ Navigate and select OSD options and items RIGHT 10 MENU Turns the On-Screen Display (OSD) menu on and off Adjusts the ch
Streszczenie treści zawartej na stronie nr. 9
INSTALLATION Connecting an RF antenna or to cable TV Make sure the power is OFF before installing your LCD TV. 1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV channels into memory with Auto Scan function when using an antenna TV system. This air input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV system (ATSC) can be found by scanning “AIR” with Auto Scan function (see page 21). 2) Cable TV: Connect the LCD TV to the
Streszczenie treści zawartej na stronie nr. 10
2) Connecting the S-Video cable: S-Video Cable (not supplied) Audio Cable (not supplied) VCD or DVD Player 3) Connecting the YPbPr cable: YPbPr Cable (not supplied) Audio Cable (not supplied) VCD or DVD Player 4) Connecting the HDMI cable: VCD or DVD Player (DVD Player should have the HDMI output terminal) HDMI Cable (not supplied) 7
Streszczenie treści zawartej na stronie nr. 11
5) Connecting the HDMI to DVI cable: Audio Cable (not supplied) VCD or DVD Player (DVD Player should have the HDMI output terminal) HDMI-DVI Cable (not supplied) Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately). Headphone (not supplied) Connecting to a Computer 1) Connecting the VGA (15-pin D-Sub): Connect the VGA cable from VGA output on the computer to the VGA terminal input on the LCD TV. Connect th
Streszczenie treści zawartej na stronie nr. 12
2) Connecting the HDMI-DVI cable: Connect the HDMI-DVI cable from the computer’s DVI output to the LCD TV’s HDMI terminal input. Connect the green end of the audio-in cable from the audio output on your computer to the audio input terminal (red/white) on the LCD TV. PC Audio Cable (not supplied) HDMI-DVI Cable (not supplied) Connecting the power cord Connect the power cord to the power receptacle on the back of the LCD TV, and plug the other end into a correctly-grounded electrical out
Streszczenie treści zawartej na stronie nr. 13
BASIC OPERATIONS To select input source, change channels, and adjust volume, use the TV remote control or the front panel controls. Before using the LCD TV Connect all external equipment properly. Connect the power cord. The power LED indicator lights orange. Turning the power on and off Press POWER on the LCD TV or press POWER on the remote control. The power LED lights blue when the LCD TV is on. Note: After a few seconds of idleness, the power LED lights orange when no signal is
Streszczenie treści zawartej na stronie nr. 14
Electronic Program Guide (EPG) Press the GUIDE button on the remote control and the program information for the channel you are watching will be displayed on the screen. * The picture here shows an example of the GUIDE screen in a DTV source. Selecting a channel Press number key or ▼CH ▲ button to select your desired channel. 1. ATV The “-” button has no function in ATV mode. Directly press the number buttons to select channels. 2. DTV Use “- ＂button to select the sub channel in DT
Streszczenie treści zawartej na stronie nr. 15
Favorite Channels Press FAV button to show Favorite List and select your favorite channels that have already been stored. (You need to preset the favorite channels from the OSD menu to enable this function.) Setting the sleep time Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice – OFF, 15min, 30min, 60min, 90min, 120min, 180min, 240min. Zoom Press ZO
Streszczenie treści zawartej na stronie nr. 16
ADVANCED OPERATIONS USING THE OSD MENU Use the OSD menu to adjust various settings for your LCD TV. Press MENU to display the OSD menu. Press ◄ or ► to select the desired OSD menu page. PICTURE Menu —To adjust the picture quality In TV, AV, S-Video, YPbPr, HDMI source: Note: When in AV, S-Video, YPbPr or HDMI source, the TIME and TV Menu options are disabled. In D-SUB source: Auto Adjust: To auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. (
Streszczenie treści zawartej na stronie nr. 17
Brightness: To adjust luminance of video. (right: Max, left: Min.) Sharpness: To adjust picture sharpness. (right: sharper, left: softer.) Tint: To adjust tint level. Color: To adjust color. (right: brilliant color, left: pale color.) Advance: To adjust advanced D-SUB functions, press ► to enter. (only enabled in D-SUB source) Phase: To adjust delay time of phase in order to reduce the noise of picture. Clock: To adjust clock frequency in order to get optimized horizontal size.
Streszczenie treści zawartej na stronie nr. 18
In ATV, AV, S-Video, YPbPr, HDMI, D-SUB source: Bass: To adjust bass. Treble: To adjust the treble. Balance: To adjust left and right audio balance. Audio Language: To select the available audio languages. (only enabled in DTV mode) TIME Menu —To set up time zone It is only active in TV source. Time Zone: To select the correct Time Zone for your area. Daylight Saving Time: To select summer Daylight Saving Time. 15
Streszczenie treści zawartej na stronie nr. 19
OPTION Menu —To set up OSD window In TV, AV, S-Video source: In YPbPr, HDMI, D-SUB source: OSD Language: To select an OSD language from English, French or Spanish. OSD Timer: To setup the display time of OSD. (5, 10, 15, 25, 40, and 60 seconds) 16
Streszczenie treści zawartej na stronie nr. 20
Closed Caption: To set close caption options. CC Mode: To select Closed Caption Mode from Off, On, or CC on Mute. Basic Selection: To set basic analog closed caption options. (CC1~CC4, TEXT1~TEXT4) Advanced Selection: To select closed caption signal formats and set up caption modes for digital TV channels. (Service1~6) Option: Press ◄► to select Mode from Default or Custom. When “Custom” is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed settings. Memo
