Instrukcja obsługi Edelbrock Kawasaki KFX400

Streszczenie treści zawartej na stronie nr. 1

6. Install supplied fuel line onto carburetor and
INSTRUCTION SUPPLEMENT FOR 2003-
secure with pinch clamp.
LATER Suzuki LTZ400 and Kawasaki
7. Install supplied vacuum line onto brass
KFX400
carburetor vacuum fitting. See Figure 1.

The vacuum fitting will have a black vinyl cap

on it from the factory.
Removing stock carburetor and cables.


Figure 1,


1. Remove seat, front fenders and gas tank.
Make sure fuel petcock is in “ON” or
“RES” position. If it is in the “

Streszczenie treści zawartej na stronie nr. 2

For twist throttle applications, install the pull cable 19. Open throttle 3-5 times to prime accelerator (long shoulder on cable) into the 8:00 position and pump. Do not open throttle any more than the return cable end into the 11:00 position of the 5 times as this may flood engine!! cable wheel. Secure cables to cable bracket by 20. Once pump is primed, engage starter replacing end piece and phillips screw. See figure without opening throttle. If Motor will not fire, 3. slowly open thr