Instrukcja obsługi Edelbrock 68752

Streszczenie treści zawartej na stronie nr. 1

TUBULAR EXHAUST SYSTEM
For 1988-1992 Camaro & Firebird, 5.0L V8 T.B.I.,
Auto & Standard Transmission, with A.I.R.
Catalog #68752, #68753
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any questions, please contact our
Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at Edelbrock@Edelbrock.com.
TUBULAR EXHAUST SYSTEM: These components are designed as a

Streszczenie treści zawartej na stronie nr. 2

INSTALLATION INSTRUCTIONS • DISASSEMBLY 8. Remove bolts and exhaust manifold from top side. 1. Disconnect negative cable from battery. 9. Clean exhaust flange surfaces on cylinder heads at this time. 2. Raise vehicle and support with jackstands. 10. Unbolt oil coolant tube from frame rail and bend brace around 3. Use penetrating oil on all nuts and bolts to be removed. This tube. Bolt new flat brace (supplied) to frame rail. This will will prevent the possibility of broken or stripped nuts and b

Streszczenie treści zawartej na stronie nr. 3

� LOWER VEHICLE TO THE GROUND � CROSSOVER PIPE ASSEMBLY 1. Connect negative cable to battery. At this point, it would be a 1. Install crossover pipe assembly on vehicle using adapter and good idea to look everything over and make sure nothing is gasket provided between right manifold and extension pipe. missed in assembly. NOTE: The gasket goes between the adapter and the manifold; 2. Start vehicle and bring up to normal operating temperature and there is no gasket between the adapter and the ex