Instrukcja obsługi Edelbrock 66152

Streszczenie treści zawartej na stronie nr. 1

TUBULAR EXHAUST SYSTEM
Applications: See Below
Catalog #66152, #66153
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any
questions, please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific
Standard Time or e-mail us at Edelbrock@Edelbrock.com.
APPLICATIONS: For 1996-1997 GM Tahoe,Yukon, Suburban, and 1996-1998 Pick-Up 1500 Series, 5.7L-V8 Auto &
Standard Transmission,

Streszczenie treści zawartej na stronie nr. 2

INSTALLATION INSTRUCTIONS • DISASSEMBLY � LEFT SIDE 1. Disconnect negative battery cable. 1. Remove spark plugs. 2. Raise vehicle and remove four O2 sensors, being 2. Unbolt E.G.R. flange from manifold. careful not to damage. 3. Remove exhaust manifold. 3. Cut left side exhaust pipe 1/2" from weld to allow 4. Install T.E.S. flange gasket and T.E.S. manifold from removal of cat. assembly (See Fig. 1). top. Install header bolts supplied, and leave loose NOTE: Before removing exhaust pipe/catalytic

Streszczenie treści zawartej na stronie nr. 3

Make First Cut While System Flange is Still on the Vehicle Left Cat. 1/2" Right Cat. 1/2" Cut 1/2" Away From Welds as Shown Make Second Cut with System Removed Fig. 1 View of Dual Catalytic Converter System Donut Gasket Make Sure There is Equal Spacing All The Way Around Fig. 2 Side View of Extension Pipe Connection Edelbrock Corporation, 2700 California St., Torrance, CA 90503 Tech Line: 1-800-416-8628 E-Mail: Edelbrock@Edelbrock.com Catalog #66152, #66153 Page 3 of 3 Brochure #63-66152 ©200