Instrukcja obsługi Edelbrock 66023

Streszczenie treści zawartej na stronie nr. 1

TUBULAR EXHAUST SYSTEM
Applications: See Below
Catalog #66022, #66023
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any
questions, please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific
Standard Time or e-mail us at Edelbrock@Edelbrock.com.
APPLICATIONS: For 1995-1997 Chevrolet/Pontiac Camaro/Firebird; Z-28, T/A, & Formula, 5.7L LT1 V8 Models with Dual
Catalytic Co

Streszczenie treści zawartej na stronie nr. 2

INSTALLATION INSTRUCTIONS • DISASSEMBLY 1. Disconnect negative battery cable. � RIGHT SIDE 2. Raise vehicle and unplug both O2 sensor cables. 1. Disconnect and remove spark plugs. 3. Starting with the driver's side, remove the three 2. Remove fan belt. bolts on the inlet flange on the catalytic 3. Disconnect and remove alternator. converter. 4. Disconnect A.I.R. fitting from manifold. 4. At midsection of left side exhaust pipe is a two- 5. Remove bolt from EGR flange for disassembly of bolt flan

Streszczenie treści zawartej na stronie nr. 3

� COWL HEAT SHIELD � FINAL INSPECTION 1. Push out three plastic pushpins (to the left of center) 1. Check all hydraulic, vacuum, and fuel lines to ensure holding seal to plastic cowl, and attach heat shield there is adequate clearance to T.E.S. components. using three 10-24 screws and nylock nuts provided. 2. Re-connect battery. Install cowl heat shield directly over left header. Be 3. At this point, it is a good idea to look everything over careful not to overtighten as screws could pull and ma