Instrukcja obsługi Edelbrock 4.3L Vortec

Streszczenie treści zawartej na stronie nr. 1

PERFORMER MANIFOLD
MODEL: Non-EGR for Chevrolet 90° V6, 4.3L Vortec
®
CATALOG #2114
INSTALLATION INSTRUCTIONS
• Please study these instructions carefully before installing your new manifold. If you have any questions or problems,
please call our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or
e-mail us at edelbrock@edelbrock.com.
 EGR SYSTEM: This manifold will not accept stock EGR (exhaust gas recirculation) equipment. Not legal on pollution-

Streszczenie treści zawartej na stronie nr. 2

 MANIFOLD TORQUE - Apply Loctite 222 to the intake bolt threads. Carefully tighten the intake manifold bolts evenly until the intake manifold has compressed the o-ring section of the gasket. Torque all of the manifold bolts in the sequence shown in Figure 1 to 11 ft/lbs or 15.0 Nm.  FIRING ORDER AND CYLINDER NUMBERING - For cylinder numbering and firing order, see Figure #2.  FINAL TUNING 1. Due to design, the fuel / air mixture and cylinder charging are very efficient with Performer manifold