Streszczenie treści zawartej na stronie nr. 1
LW15M23C/LW17M24C/LW17M24CU/ /
LCD TV LW20M21C LW20M22C
858C_cover.qxd 2/22/05 11:43 PM Page 1
LCD TV
LW15M23C
LW17M24C
-
AFTER SALES SERVICE
LW17M24CU
LW20M21C
-
Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
LW20M22C
faulty condition may be present.
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ELECTRONICS
ON-SCREEN MENUS
PC DISPLAY
TELETEXT
BN
Streszczenie treści zawartej na stronie nr. 2
Eng.qxd 1/9/04 9:11 PM Page 1 Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Digital Ready TV: When you Although digital broadcasting must be in the select the regular screen (4:3) wide screen (16:9) HD format, broadcasters mode to watch an SD-grade sometimes show programs made originally digital broadcast (and the set-top in the regular screen format (4:3) by box output is 480p). converting the signals into digital form, in which case t
Streszczenie treści zawartej na stronie nr. 3
Eng.qxd 1/9/04 9:11 PM Page 2 • Integrated Digital TV Although digital broadcasting must be in the (Wide-screen): When the TV wide screen (16:9) HD format, broadcasters receives SD-grade (regular) sometimes show programs made originally broadcasting signals (receives in the regular screen format (4:3) by 480p regular signals). converting the signals into digital form, in which case the left and right side edges of • Digital Ready TV (wide-screen): the screen are cropped. digital TV: When the
Streszczenie treści zawartej na stronie nr. 4
01-BN68-00858C-00Eng.qxd 1/7/04 7:07 PM Page 2 Contents CONNECTING AND PREPARING YOUR TV Viewing the Control Panel............................................................................. 4 Viewing the Connection Panel ...................................................................... 5 - Connecting an Aerial or Cable Television Network.................................... 6 - Connecting a Set-Top Box, VCR or DVD .................................................. 6 - Connecting a
Streszczenie treści zawartej na stronie nr. 5
01-BN68-00858C-00Eng.qxd 1/7/04 7:07 PM Page 3 Contents SETTING THE TIME Setting the Clock ........................................................................................... 30 Switching Off Automatically........................................................................... 31 Switching the Television On and Off Automatically....................................... 32 USING THE VARIOUS FUNCTIONS Setting the Blue Screen Mode .............................................
Streszczenie treści zawartej na stronie nr. 6
01-BN68-00858C-00Eng.qxd 1/7/04 7:07 PM Page 4 Viewing the Control Panel POWER SOURCE Turns ON/OFF your set. Displays a menu of all of the available input sources (TV - AV1 - AV2 - S-Video - PC). HEADPHONE You can also use the SOURCE() button on the TV’s control panel SPEAKERS to make selections. REMOTE CONTROL SENSOR MENU Aims the remote control towards this spot on the TV. Press to see an on-screen menu of your TV’s features. POWER INDICATOR Lights up when you turn the power off. - + (Red l
Streszczenie treści zawartej na stronie nr. 7
01-BN68-00858C-00Eng.qxd 1/7/04 7:07 PM Page 5 Viewing the Connection Panel < LW17M24C / LW17M24CU > < LW15M23C / LW20M21C / LW20M22C > Power Input Power Input Option SCART Whenever you connect an audio or video system to your set, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. English-5
Streszczenie treści zawartej na stronie nr. 8
01-BN68-00858C-00Eng.qxd 1/7/04 7:07 PM Page 6 Viewing the Connection Panel Connecting an Aerial or Cable Television Network (depending on the model) To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial - A cable television network - A satellite network Connecting a Set-Top Box, VCR or DVD - Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD. - If you wish to connect both the Set-Top Box an
Streszczenie treści zawartej na stronie nr. 9
01-BN68-00858C-00Eng.qxd 1/7/04 7:07 PM Page 7 Viewing the Connection Panel Connecting External A/V Devices - Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD or Camcorder. - Connect RCA audio cables to “(MONO)L-AUDIO-R” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. Connecting Headphones - Plug a set of headphones into the 3.5mm mini-jack socket on the right-side of the set. While the headphones are co
Streszczenie treści zawartej na stronie nr. 10
01-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 8 Viewing Pictures From External Sources Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input. 1 Check that all the necessary connections have been made (refer to pages 6 and 7 for further details). 2 Press the TV button to choose TV mode. Press the SOURCE button to choose Video mode. The input sources are displayed in the following order: AV1 - AV2 - S-Video - PC. Eng
Streszczenie treści zawartej na stronie nr. 11
01-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 9 Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: Purchase your set Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it. 2 Install two AAA size batteries. + on the battery against + on the remote control - on the battery against - on the remote
Streszczenie treści zawartej na stronie nr. 12
01-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 10 (All Functions Except Teletext) Viewing the Remote Control Television On/Off Numeric buttons for direct channel access Previous channel One/Two-digit channel selection -Next channel -Previous channel Temporary sound switch-off Available source selection Volume up or down Use to see information on the current broadcast. Select to the TV mode directly Menu display and Exit the OSD change confirmation Control the cursor in the menu Sound mode sel
Streszczenie treści zawartej na stronie nr. 13
01-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 11 (Teletext Functions) Viewing the Remote Control Teletext hold P : Teletext next page P : Teletext previous page Teletext mode selection (LIST/FLOF) Exit from the teletext display Teletext reveal Teletext index Teletext sub page Teletext store Teletext display/mix both teletext information Teletext size selection and the normal broadcast Fastext topic selection English-11
Streszczenie treści zawartej na stronie nr. 14
01-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 12 Switching On and Off The mains lead is attached to the rear of your set. 1 Plug the mains lead into an appropriate socket. Result: When the power cord is plugged in, the LED turns red. 2 Press the POWER button to switch on. 3 To switch off, press the POWER button again. Placing in Standby Mode Your set can be placed in Standby mode in order to reduce the power consumption. The Standby mode can be useful when you wish to interrupt viewing temporar
Streszczenie treści zawartej na stronie nr. 15
01-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 13 Becoming Familiar with the Remote Control The remote control is used mainly to: Change channels and adjust the volume Set up your set using the on-screen menu system The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the next - stored channel. Used to display the - previous stored channel. PRE-CH Used to switch repeatedly between the last two channels displayed.
Streszczenie treści zawartej na stronie nr. 16
02-BN68-00858C-00Eng.qxd 2/22/05 2:46 AM Page 14 Plug & Play When the set is initially powered ON, you are automatically presented with a series of basic customer settings. The following settings are available. 1 If the set is in standby mode, press the POWER button on the remote control. Result: The message Plug & Play is displayed. It appears for a little while, and then the Language menu is automatically displayed. 2 Select the appropriate Language by pressing the or button. The available
Streszczenie treści zawartej na stronie nr. 17
02-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 15 Plug & Play If you want to reset this feature... 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select the Setup. Result: The options available in the Setup group are displayed. 3 Press the ENTER button. 4 Press the or button to select the Plug & Play. Press the ENTER button. Result: The message Plug & Play is displayed. 5 For further details on how to set up this feature, refer to the previous page. Englis
Streszczenie treści zawartej na stronie nr. 18
02-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 16 Selecting TV Mode or an Input Source You can choose TV mode or change to an input source connected to the TV set. Use this button to choose an input source that you would like to watch. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the ENTER button to select the Input. Result: The options available in the Input group are displayed. 3 Press the ENTER button. Result: The Source List is selected. 4 Press the or button to move
Streszczenie treści zawartej na stronie nr. 19
02-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 17 Editing an Input Source Name Entering the names of the input source devices connected to the input ports on the TV set allows you to find and choose an input source that you would like to watch in a quick and convenient manner. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the ENTER button to select the Input. Result: The options available in the Input group are displayed. 3 Press the or button to select the Edit Name. Pres
Streszczenie treści zawartej na stronie nr. 20
02-BN68-00858C-00Eng.qxd 1/7/04 7:08 PM Page 18 Choosing Your Language When you start using your set for the first time, you must select the language which will be used for displaying menus and indicators. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select the Setup. Result: The options available in the Setup group are displayed. 3 Press the ENTER button. 4 Press the or button to select the Language. Press the ENTER button. 5 Select a particular Langua
