Streszczenie treści zawartej na stronie nr. 14
Connections & Setup Connections & Setup TV+ A/V Receiver or Speakers These are two different ways your TV uses a component to hear audio. 1. Connect audio cables to either the FIXED or VARIABLE AUDIO L and R OUTPUT jacks and to the Audio Inputs on the A/V receiver. • FIXED provides fixed-level audio output from the TV. This audio output is ideal for connecting to an A/V receiver that has its own volume control. • VARIABLE provides variable-level audio output. Volume levels can be controlled b
Streszczenie treści zawartej na stronie nr. 15
Connections & Setup Connections & Setup Explanation of Jacks (in alphabetical order) This section describes the jacks you can use to make connections. There are several ways to connect components to your TV. ANTENNA/CABLE Lets you connect a coaxial cable to receive the signal from the � � � � � � � � antenna, cable, cable box, or if using the examples on pages 6-11, a VCR. � � � � � AUDIO/VIDEO OUTPUT Lets you connect an amplifier or audio receiver for improved AUDIO/VIDEO OUTPUT sound qua
Streszczenie treści zawartej na stronie nr. 16
Connections & Setup Connections & Setup DVI-HDTV Input Lets you connect an HDTV Tuner with a DVI output. • DVI (Digital Visual Interface) Provides an uncompressed, digital video interface developed for high-bandwidth digital connection. It supports the overlay of high- � �������� resolution graphics needed by some electronic program guide navigation and other interactive services. DVI, when combined with HDCP (High bandwidth Digital � Content Protection) technology, creates a protected digi
Streszczenie treści zawartej na stronie nr. 17
> Connections & Setup Connections & Setup Front Panel Buttons If you cannot locate your remote, you can use the front panel buttons of your TV to operate many of the TV’s features. MENU/OK Brings up the Main menu. In the menu system, it selects highlighted items. CH Scans down through the current channel list. In the menu system, acts like down arrow button on the remote control and adjusts menu controls. CH Scans up through the channel list. In the menu system, acts like up arrow button o
Streszczenie treści zawartej na stronie nr. 18
Connections & Setup Connections & Setup Turn on the TV Press TV on the remote, or press POWER on the TV’s front panel. Note: Pressing the TV button not only turns on the TV, but puts the remote into TV mode. “TV mode” means that the buttons on the remote control operate the TV’s functions. Tip Complete the Initial Setup To access the setup menus manually, press The menu system in your TV allows the TV’s features to work properly. The MENU and choose SETUP. first time you turn on your TV, th
Streszczenie treści zawartej na stronie nr. 19
Connections & Setup Connections & Setup Changing Lists and Labels The List & Labels part of the setup lets you edit your channel list and choose or create a personal six-character label for each channel. Note: Changing List and Labels can be time consuming. You can change these at a later time by accessing the Setup menu. 1. Press the left or right arrow to scroll through the channels and choose the one you want to edit. 2. Press the down arrow to highlight the In channel list option. Pre
Streszczenie treści zawartej na stronie nr. 20
Using the Remote Control Using the Remote Control Indicator The Buttons on the Remote Control (0-9) Number Buttons Enter channel numbers and time settings directly through the remote control. To enter a one-digit channel, enter a zero first. To enter a two-digit channel, ��� ������ press the two digits. To enter a three-digit channel, press and hold the 1 button until 1 and two dashes (– –) appear, then add the second two digits. Example: ������ �� to tune to channel 123, press and hold 1 un
Streszczenie treści zawartej na stronie nr. 1
HDTV Monitor
User’s Guide
Changing Entertainment. Again.
Streszczenie treści zawartej na stronie nr. 2
Important Information This symbol indicates that this product WARNING C A UTION incorporates double insulation between RISK OF ELECTRIC SHOCK To reduce the risk of fire hazardous mains voltage and user DO NOT OPEN or electric shock, do not accessible parts. When servicing use only expose this product to rain identical replacement parts. or moisture. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualifie
Streszczenie treści zawartej na stronie nr. 3
Important Information IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do
Streszczenie treści zawartej na stronie nr. 4
Introduction Key Features Overview Your TV is equipped with features that will add to your TV viewing experience. The following information summarizes a few of these features. Chapter 3 provides more information about the rest of the TV’s features and how to use them. Hi-Pix Picture Enhancement System The Hi-Pix Picture Enhancement System incorporates two of RCA’s most advanced technologies: TruScan Digital Reality and the AVR Picture Projection System. The result is the ultimate in true-to-li
Streszczenie treści zawartej na stronie nr. 5
Table of Contents Important Safety Instructions.......................................... 1 Channel 3: Special Features Channel Banner............................................................... 24 Introduction Autotuning...................................................................... 24 Why You Should Use the Autotuning Feature ....... 24 Key Features Overview .................................................... 2 How to Set Up the Autotuning Feature.................. 25 Parental Contr
Streszczenie treści zawartej na stronie nr. 6
Connections & Setup Connections & Setup Things to Consider Before You Connect Protect Against Power Surges • Connect all components before you plug any of their power cords into the wall outlet. • Turn off the TV and/or component before you connect or disconnect any cables. • Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions on page 1. Protect Components from Overheating • Don’t block ventilation holes on any of the components. Arrange
Streszczenie treści zawartej na stronie nr. 7
Connections & Setup Connections & Setup Choose Your Connection There are several ways to connect your TV. Please use the following chart to determine which connection is best for you. Proceed to the appropriate page and connect your TV. Note for US customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this servi
Streszczenie treści zawartej na stronie nr. 8
Connections & Setup Connections & Setup ����� � � ��������������� ������������������ 1A 1B ���������� � ������ ���� � ���� � ���� � ������� � ���� � � � � � � � � � � ������� ������ � ������� ��� ��������� � � � � � � � ������� 2A 3A 2B 3B �� 6A � � 6B ��������� ����� ���� ����������������� 4A 4B ���������������� ��� � ���� ���������������� � � � � � � � � � � � � � AUDIO/VIDEO OUTPUT 4C � � ������� � � � ���� ����������� � � � � � � � � � � �������� �������� ���� ������ ���� � �� ����������� ��
Streszczenie treści zawartej na stronie nr. 9
Connections & Setup Connections & Setup TV + HDTV Tuner + VCR + DVD Player 1. Make sure cable or antenna and/or satellite is connected to your VCR. A. Connect the coaxial cable from your cable outlet or antenna to the antenna input on the HDTV Tuner. B. Connect the satellite dish antenna to the satellite input on the HDTV Tuner. 2. Make the video connection between your HDTV Tuner and the TV. A. Best Connection: DVI-HDTV Connect a DVI-HDTV cable to the DVI-HDTV jack on the back of your HD
Streszczenie treści zawartej na stronie nr. 10
Connections & Setup Connections & Setup �� ������� �������� ����� � ���� � ������� � 3A 3B �� 3C � � ��������� ����� ���� ����������������� ���������������� ��� � ��� � � � � � � � � � ���������������� � � � � � AUDIO/VIDEO OUTPUT � � ������� � � � ��� � ����������� � � � � � � � � � � �������� �������� ��� � ������ ���� � �� ����������� ������� � � � � � � � � � � � � � � � � � � � � � � 1C ����� � � ��� �� ����� 1B ��� ����� � ����� � ����������� ���������� 1A ����� � � �������������� � 2 Grap
Streszczenie treści zawartej na stronie nr. 11
Connections & Setup Connections & Setup TV + Satellite Receiver + VCR 1. Connect your VCR to your TV. A. Connect a coaxial cable to the VCR’s antenna output and to the ANTENNA/CABLE Input jack on the TV. B. Connect the audio (white and red) cables to the VID2 L/MONO and R Audio jacks on the back of the TV and to the Audio Output jacks on the VCR. C. Connect the video cable to the VID2 V (Video) jack on the back of the TV and to the Video Output jack on the VCR. 2. Make sure cable or ante
Streszczenie treści zawartej na stronie nr. 12
Connections & Setup Connections & Setup ������� ��� ��������� � � � � � � � ������� 1A �� � � 1B ��������� ����� ���� ����������������� ���������������� ��� � ��� � � � � � � � � � ���������������� � � � � � AUDIO/VIDEO OUTPUT � � ������� � � � ��� � ����������� � � � � � � � � � � �������� �������� ��� � ������ ���� � �� ����������� ������� � � � � � � � � � � � � � � � � � � � � � � ����� � � ��� �� ����� 2C ��� ����� � ����� � ����������� ���������� 2B 2A ����� � � 3 �������������� � Graphics
Streszczenie treści zawartej na stronie nr. 13
Connections & Setup Connections & Setup TV + DVD + VCR 1. Connect your DVD Player to your TV. A. Connect the audio (white and red) cables to the CMP1 L and R Audio jacks on the back of the TV and to the Audio Output jacks on the DVD player. B. Connect three video grade cables to the CMP1 Y PB PR jacks on the back of the TV and to the Y PB PR jacks on the DVD player. Notes: If your DVD player does not have Y PB PR jacks, but does have an S-Video jack, connect the player to the VID1 S-VIDEO j
