Instrukcja obsługi Accel 140025

Streszczenie treści zawartej na stronie nr. 1

FORM 1647 02/05
INSTALLATION INSTRUCTIONS
AFTERBURNER SWITCHABLE COIL
#140025
Reading these instructions before starting the installa- fins for efficient heat dissipation. A mounting/
tion process will ensure that you will be able to take installation hardware kit is included. A universal
the maximum advantage of all the performance that wiring harness is also included. This OEM quality
your ACCEL Afterburner switchable coil was designed harness is designed to work with most vehicles’
to deli

Streszczenie treści zawartej na stronie nr. 2

You can usually find a source for 12 V switched the switch to the on position, you are switching the ignition source on the ignition “on” powered side of ACCEL Afterburner coil into the high RPM mode. By the fuse panel. Depending on the vehicle, there are closing the switch cover you are also turning the some times extra terminal positions in the ignition “on” switch toggle off at the same time and also returning powered side of the fuse panel that can be plugged the ACCEL Afterburner coil to t

Streszczenie treści zawartej na stronie nr. 3

B) Bend the core conductor back over the wire and arming cover plate over the switch. Note the align- insert into the terminal. ment tab and slot on the arming cover plate and the switch. Secure the switch and arming cover plate to the switch with the switch nut. Step #7 C) Bend the terminal tabs over with pliers and/or an Carefully route the ACCEL harness away from any ignition wire-crimping tool. linkage, air conditioning lines, heater hoses, exhaust manifolds, etc. by using the mounting hardw

Streszczenie treści zawartej na stronie nr. 4

FORM 1647 ACCEL IS A DIVISION OF THE MR. GASKET PERFORMANCE GROUP 02/05 10601 MEMPHIS AVE #12, CLEVELAND, OH 44144 Made in U.S.A. 216.688.8300 FAX 216.688.8306 Printed in U.S.A. 4 www.accel-ignition.com ACCEL