Streszczenie treści zawartej na stronie nr. 9
Using your System Commanding the system Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used keyless entry and remote start features while Advanced commands control more specialized fea- tures. Confirmations for Basic or Advanced commands are indicated by horn honks* and parking light flashes. A description of each fea- ture confirmation is found in the following Basic command and
Streszczenie treści zawartej na stronie nr. 10
Remote Control Command table Basic Advanced Commands Commands Direct Access Level x 1 x 2 x 3 x 4 Button Lock Silent Lock Unlock Silent Unlock Valet Mode Car Finder Remote Start Reset Runtime Timer Mode Smart Start Rear Defogger AUX Trunk Release AUX 1 AUX 2 AUX 3 AUX 4 Lock Runtime Function Shift Cabin Temp. Status Check Request (2- way only) (2- way (2- way only) only) © 2011 Directed Electronics. All rights reserved. 7
Streszczenie treści zawartej na stronie nr. 11
Basic Commands (Direct Access) Lock Press and release , Doors lock (if connected). The horn honks once, and the parking lights flsh one-time. Lock LED turns on with 1 beep. To Lock and Panic Press and hold To lock the system, then activate Panic. For Panic to work,the optional horn honk feature must be connected. Press the or button to stop Panic output. Unlock Press and release . The doors unlock (if connected). The horn honks twice and the parking lights flash. Unlock LED turns on an
Streszczenie treści zawartej na stronie nr. 12
AUX/Trunk** Press and hold AUX. The AUX LED turns on and tones play to confirm. The Trunk opens (if connected) when this button is pressed for 2 seconds. * For Manual transmission vehicles see “Manual Transmission Start (MTS mode)” on page 22 in the “Remote Start Features” section for more details. **This is an optional feature. See your authorized Directed dealer for details. Advanced Commands: (Level 1) Press and release the button 1 time. The transmit LED illuminates in sets of single fl
Streszczenie treści zawartej na stronie nr. 13
Runtime Reset Press and release If more time is needed while remote start is active, runtime reset will reset the runtime counter to the pre-programmed setting. The green ghost LED’s show the runtime and the remote start On tones play to comfirm runtime reset. Note Remote Start must be On to use this feature. AUX 1 Press and release AUX Activates (or if On, deactivates) the Aux 1 output. The AUX LED turns on and tones play to confirm. Temperature Request Press and hold the button Requests th
Streszczenie treści zawartej na stronie nr. 14
Remote Valet Press and release Enters (or if On, exits) Valet Mode. The Control Center LED turns on and off accordingly, and prevents doors from locking passively. The The Unlock LED and Valet beeps play (1 for on, 2 for off) to confirm. Timer Start* Press and release Activates (or if On, deactivates) Timer Start. The parking lights flash quickly four times for On and slowly four times for Off. The Remote Start LED and beeps play (1 for on, 2 for off) to confirm. System needs to be locked or
Streszczenie treści zawartej na stronie nr. 15
Advanced Commands: (Level 3) Press and release the button 3 times. The transmit LED illuminates in sets of triple flashes to indicate Level 3. Car finder Press and release The horn emits one long honk and the parking lights flash for 10 sec- onds. The parking light flashes stop if locked or unlocked while Car Finder is in progress. Lock and Unlock cancels the parking light flash. Smart Start* Press and release Activates (or if On, deactivates) Smart Start. The parking lights flash quickly five ti
Streszczenie treści zawartej na stronie nr. 16
Example for 12 minute runtime: 3 LED’s: 6 to 9 minutes remaining (50 - 75% of time selected). 1 LED: less than 3 minutes remaining (<25% of time selected). *See “Advanced Start” under “Remote Start Features” for more de- tails. Advanced Commands: (Level 4) Press and release the button 4 times. The transmit LED illuminates in sets of quadruple flashes to indicate Level 4. Defogger* Press and release Activates the vehicle Defogger circuit (if connected) while Remote Start is activated and the
Streszczenie treści zawartej na stronie nr. 17
Remote Control Configuration The remote controls have operations that can be configured to a user’s personal preferences. The following instruction will direct you through the available configuration and programing options for the remote control. Remote Programming Enter programming, press and hold the button for 8 seconds, the transmit LED turns on to indicate the Main Menu is accessed. Exit programming or go back to a previous menu, press and release the button. 1 short and 1 long beep is
Streszczenie treści zawartej na stronie nr. 18
Prepare the remote control for pairing: 5. Enter programming by pressing and holding the button for 8 seconds to access the Main Menu. 6. Press and hold the button for 1 second, 3 transmit LED flash- es indicate the remote control is ready to pair. 7. Press the button. The horn (if connected) honks and the remote emits tones to confirm pairing is complete. 1-way companion: the horn honks to confirm the system has learned the remote control. Remote Features From the main menu, press the bu
Streszczenie treści zawartej na stronie nr. 19
1-way companion remote control The 1-way remote will flash the transmit LED to indicate the setting. Feature Button Press Single Flash Double Flash Keypad Lock Auto Off * No function No function No function Car 2 Car 2 On Car 2 Off * Keypad Lock Options: Off, Auto When Off, the buttons do not lock and always perform a command when pressed. When set to Auto, the remote buttons lock after a 20 second lapse between button presses to prevent unintentional opera- tions. If a button is pressed when
Streszczenie treści zawartej na stronie nr. 20
Page Mode* Options: Power Save 1, Power Save 2, On, Off. The Responder LE remote monitors your system’s messages via Paging. When Paging is On the remote wakes up every few seconds to detect pages from the system. When Off the remote does not wake up to receive pages from the system. Power Save extends battery life by turning Paging Off after 72 hours if the remote control is not used during this period. Just press any button to resume system monitoring. See Battery Life. * This option is
Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
Congratulations Congratulations on the purchase of your state-of-the-art remote start and keyless entry system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For more information please visit the below website: http://www.clifford.com – For general and additional guide in- formation. For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. (U.S. only) What yo
Streszczenie treści zawartej na stronie nr. 3
Important information Government Regulations and Safety information Read the Government Regulations and Warning! Safety First sections of this manual prior to operating this system. Warning! Failure to heed this information can result in death, personal injury or property damage and may also result in the illegal use of the system beyond its intended purpose. Your Warranty Your system comes with a warranty. Please make sure you receive the warranty registration card and proof of purchase
Streszczenie treści zawartej na stronie nr. 4
Contents Getting Started .................................................................................................... 3 Keys to using this manual ...................................................................... 3 Remote Control Information .................................................................................. 4 Control Center ..................................................................................... 5 Using your System ........................................
Streszczenie treści zawartej na stronie nr. 5
Remote Start Safe-lock ...................................................................... 20 Disabling Remote Start ..................................................................... 20 Advanced Start ................................................................................. 20 Temperature Reporting ........................................................................ 21 Remote Start Time-out Alert .................................................................. 21 Manual
Streszczenie treści zawartej na stronie nr. 6
Getting Started Keys to using this manual Specific actions (in bold type) and style conventions are used consis- tently throughout this manual, they are as follows: Press: implies pushing in and releasing a button. Hold: is used after Press actions when a button needs to be held in position for an extended period of time, typically several sec- onds. Italicized words denote section/sub headings in this guide and can be located through the table of contents. An asterisk (*) when used after
Streszczenie treści zawartej na stronie nr. 7
Remote Control Information Internal Antenna Transmit LED Ghost Command LED’s Buttons AUX Function Button Feature Description Internal Antenna Used for transmitting and receiving*information Command buttons (4) Used to perform locking, unlocking, auxiliary channel and remote start commands Function button Used to access function levels for commands, configura- tion menus for programming, Car Selection, and to request reports. Ghost LED’s** Each button has an associated LED next to it that are a
Streszczenie treści zawartej na stronie nr. 8
Control Center Control button Antenn Status LED The Control Center, typically located on the upper part of the front windshield. It consists of: The In-vehicle system antenna. The Status LED, as a visual indicator of the system’s status. The Control button, for placing the system into Valet Mode* and to perform the Emergency Override operation. * See “Remote and System Operations” on page 25. © 2011 Directed Electronics. All rights reserved. 5
