Streszczenie treści zawartej na stronie nr. 1
LCD FLAT PANEL HDTV
MODELS
148 Series
LT-40148, LT-46148, LT-52148
246 Series
LT-46246, LT-52246
OWNER’S GUIDE
• For questions:
- Visit our website at www.mitsubishi-tv.com.
- E-mail us at MDEAservice@mdea.com.
- Call Consumer Relations at 800-332-2119.
• For information on System Reset, please see the back cover.
• To order replacement or additional remote controls or Owner’s Guides, visit our website at
www.mitsuparts.com or call 800-553-7278.
• Guidelines for setting up and using your ne
Streszczenie treści zawartej na stronie nr. 2
FCC Declaration of Conformity For Your Records Record the model number, serial number, and Product: LCD Flat Panel HDTV purchase date of your TV. The model and serial Models: LT-40148, LT-46148, LT-52148 numbers are on the back of the TV. Refer to this LT-46246, LT-52246 page when requesting assistance with the TV. Responsible Mitsubishi Digital Electronics MODEL NUMBER Party: America, Inc. SERIAL NUMBER 9351 Jeronimo Road PURCHASE DATE Irvine, CA 92618-1904 RETAILER NAME Telephone:
Streszczenie treści zawartej na stronie nr. 3
Contents ChannelView Channel Listings .............. 31 Important Information About Your TV Status Display ......................... 32 Important Safety Instructions ................ 4 Fav (Favorite Channels) ................... 33 Installation and Operating Notes ............. 5 TV Signals and Display Formats ............. 34 TV Guide Daily Access Requirements .......... 5 Viewing Camera Files and GalleryPlayer Images . 35 Cleaning Recommendations ................ 5 5 TV Menus 1 Television Ov
Streszczenie treści zawartej na stronie nr. 4
4 Important Safety Instructions Please read the following safeguards for your TV and 10) Protect the power cord from being walked on retain for future reference. Always follow all warnings or pinched particularly at plugs, convenience and instructions marked on the television. receptacles, and the point where they exit from the apparatus. 1) Read these instructions. 11) Only use attachments/accessories specified by the 2) Keep these instructions. manufacturer. 3) Heed all warnings. 12) Us
Streszczenie treści zawartej na stronie nr. 5
5 Installation Notes Cleaning Recommendations Wall Mount Requirements Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is For wall-mounting, see “Stand Removal,” page 11. needed, please use the following guidelines: Use with other than the authorized accessories First, turn off the TV and unplug the power cord from may cause the TV to become unstable, which can the power outlet. cause damage to the product or possible injury. Cus
Streszczenie treści zawartej na stronie nr. 6
6 Television Overview 1 16:9 Widescreen Picture Format Package Contents Enjoy a full theatrical experience in the comfort of your Please take a moment to review the following list of home. View pictures as film directors intended them. items to ensure that you have received everything. Digital TV broadcasts, DVDs and newer video game consoles support this widescreen format. 1. Remote Control 2. Two AA Batteries Integrated HDTV Tuner 3. Cable Tie with Pin Your widescreen Mitsubishi HDTV has
Streszczenie treści zawartej na stronie nr. 7
1. Television Overview 7 DVD players, cable boxes, and satellite receivers. Net- Command can “learn” remote control signals directly SYSTEM FORMAT FORMAT MENU MENU GUIDE GUIDE INPUT INPUT POWER VOL VOL CH CH RESET from many devices, allowing you to create a custom- ENTER ENTER MENU MENU CANCEL CANCEL ADJ ADJ ADJ ADJ ized NetCommand-controlled home-theater system. NetCommand for HDMI HDMI devices with Consumer Electronics Control (CEC) capabilities may be compatible with the TV’s NetCom- SYS
Streszczenie treści zawartej na stronie nr. 8
8 1. Television Overview Front-Panel Indicators STATUS POWER IR Sensor • STATUS indicator. Off during normal TV operation. • POWER/TIMER indicator. Lit when TV is powered on; flashes when TV is powered POWER STATUS off and the auto-on TV Timer is set. • IR Sensor (Infrared Sensor). Detects infra- IR Sensor red signals emitted by the remote control. 148 Series TVs 246 Series TVs Off Steady On Slow Blinking Fast Blinking POWER Indicator LED Color TV Condition Additional Informati
Streszczenie treści zawartej na stronie nr. 9
1. Television Overview 9 TV Main Panel 1. ANT 1/ANT 2 (Antenna) If you are connecting an antenna or direct cable service HDMI without a cable box, connect the main antenna or cable VIDEO: 480i, 480p /720p source to ANT 1. Use ANT 2 for a second source. 1080i /1080p 4 AUDIO: ANT 1 and ANT 2 can each receive digital and analog PCM STEREO over-the-air channels from a VHF/UHF antenna or non- PC: VGA, scrambled digital/analog cable source. W-VGA, SVGA, W-SVGA, XGA, W-XGA, SXGA / ANT
Streszczenie treści zawartej na stronie nr. 10
10 1. Television Overview TV Main Panel, continued 8. HDMI™ Inputs (High-Definition HDMI Cable Categories Multimedia Interface) HDMI cables are available as Category 1 and Category 2 The HDMI inputs support uncompressed standard and high- types. definition digital video formats and PCM digital stereo audio. • Category 2 Cables (also called high-speed HDMI Use the HDMI inputs to connect to CEA-861 HDMI compli- cables). Newer, HDMI 1.3-compliant DVD players, ant devices such as a high-defi
Streszczenie treści zawartej na stronie nr. 11
1. Television Overview 11 Stand Removal CAUTION At least TWO PEOPLE are needed to safely remove the stand. Have one person hold the TV while the other person removes the stand. Failure to follow these recommendations may result in personal injury and damage to the product. Stand-Removal Procedure: 1. Disconnect the TV’s AC power cord from the AC power outlet. 2. Spread the protective sheet that was wrapped around the TV on a flat, even surface, such as a sturdy table.
Streszczenie treści zawartej na stronie nr. 12
12 TV Set-Up 2 Guidelines for Setting Up and Using Your New Widescreen TV Getting Started 1. Review the important safety, installation, and oper- Turning the TV On or Off ating information at the beginning of this book. To turn the TV on or off, point the remote control at the 2. Choose a location for your TV. front of the TV and press the POWER button. Alterna- • Allow at least four inches of space on all sides tively, press the POWER button on the TV’s control panel. of the TV to help prev
Streszczenie treści zawartej na stronie nr. 13
2. TV Setup 13 Additional TV Setup TV Operation 1. Review chapter 4, “TV Operation and Features,” for 1. Review chapter 5, “TV Menus,” to customize TV TV features including: operation. Press the MENU key to enter the menu system. Some examples of settings you may wish • Input Selection (viewing source). Select a to change include: connected program source to watch, such as a VCR, DVD player, or antenna. Press INPUT on the • Fav. Use an on-screen menu to create custom remote cont
Streszczenie treści zawartej na stronie nr. 14
14 2. TV Setup • U s e t h e Setup > Edit menu (page 45) for additional Initial TV Setup channel options, such as adding or deleting chan- Use the Setup menu for basic TV setup options. nels from memory, naming channels, and saving 1. Press MENU to open the Main menu. favorite channels in custom memory banks. 2. Press to highlight the Setup icon and display the See chapter 5, “TV Menu Settings,” to: Setup menu. • S e t t h e T V c l o c k ( p a g e 4 6 ) • S e t t h e T V T i m e r ( p a
Streszczenie treści zawartej na stronie nr. 15
2. TV Setup 15 Setting Up TV Inputs, continued Auto Input/Auto Output Sensing Screens See below for how different connections are handled Auto Input Sensing for CEC-Enabled Devices by Auto Input/Auto Output Sensing. When the TV’s NetCommand for HDMI feature is • Most Device Types. Select the device type enabled, most CEC-enabled devices are recognized from the on-screen list. The device type you select and identified automatically by the TV. NetCommand here will appear as an icon in
Streszczenie treści zawartej na stronie nr. 16
16 2. TV Setup Controlling A/V Receiver Sound Volume Setting Up TV Inputs, continued Use one of the methods below to control sound volume from Tips on Auto Sensing and Changing the A/V receiver. Connected Devices With a Standard TV Setup • Choose a different name for each input. • Antenna inputs (ANT 1/ANT 2) are never detected, • Recommended Method: Program the TV’s although you can turn off unused antenna inputs in the remote control for your A/V receiver and enable the Inputs > Nam
Streszczenie treści zawartej na stronie nr. 17
2. TV Setup 17 About Home-Theater Control Systems This summary offers some examples of the control methods available using the TV’s remote control. You may wish to use one or more of these methods in your home theater after completing Auto Input Sensing. Source device connected directly to the TV Remote Control Programming with Any Connection Type Any Connection Type Program the remote control to operate the A/V device. To control the device, set the slide switch to the correct position fo
Streszczenie treści zawartej na stronie nr. 18
18 2. TV Setup Using the TV with a Personal Computer Connecting a Computer to the TV Use one of the connection methods listed below based 2. Computer with HDMI HDMI on your computer’s video output. DVI and stereo 4 4 audio outputs Computer Audio Video Connection 3 3 Video Output Connection 2. Digital DVI DVI-to-HDMI cable Stereo audio 2 2 or an HDMI cable cables TV main 1 1 with an HDMI-to- panel DVI adapter IR- NetCommand Output / External S-VIDEO Controller Input INPUT3 Not
Streszczenie treści zawartej na stronie nr. 19
2. TV Setup 19 Using the TV with a Personal Computer Computer Video Adjustments Tip 1. Power on the computer if it is not already on. Set the computer’s screen saver to display a pattern after several minutes of inactivity. This acts as a 2. Select PC from the Input Selection menu. To do reminder that the TV is powered on. this, press INPUT to open the Input Selection menu, move the highlight to the PC icon, and press ENTER. 3. Working from the computer, change the resolution of the com
Streszczenie treści zawartej na stronie nr. 20
20 2. TV Setup Using a CableCARD In order to start cable service for this device, please contact your cable provider 246 Series TVs 1-800-xxx-xxxx CableCARD(tm): xxx-xxx-xxx-xxx-xxx-x The CableCARD™ system allows your TV to receive, Host: xxx-xxx-xxx-xxx-x decode, and unscramble the premium digital channels Data: xxx-xxx-xxx-xx included in your cable TV subscription without the use UnitAddress: xx-xxxxx-xxxxx-xxx of a cable box. The system is unidirectional, meaning Press EXIT to exit. that
