Streszczenie treści zawartej na stronie nr. 1
PLASMA TV
OWNER`S MANUAL
MODELS: P42LV6-T1
P50V6-A8
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Streszczenie treści zawartej na stronie nr. 2
Congratulations on your purchase, and welcome to the "" family ! Dear Haier product owner: Thank you for your confidence in Haier. You`ve selected one of the best-built, best-backed products available today. We`ll do everything in our power to keep you happy with your purchase for many years to come. As a member of the Haier "" family, you`re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry. Thanks for investing in a Haier p
Streszczenie treści zawartej na stronie nr. 3
Important Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. 1. Retain these Instructions ---The safety and operating instruc
Streszczenie treści zawartej na stronie nr. 4
Important Safety Instructions a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have been fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require
Streszczenie treści zawartej na stronie nr. 5
Table of Contents 1 Warning ............................................. Sound menu.............................................. 26 2 Important Safety Instructions................ To choose sound modes .......................... 26 5 buttons and interface location.............. Balance................................................. 26 5 Front control panel............................ Setting Five Equalizer sound ................... 27 Rear control panel.....................
Streszczenie treści zawartej na stronie nr. 6
Buttons and interface location -This is a simplified representation of front panel. -Here shown may be somewhat different from your TV. Front control panel P42LV6-HD 1.EXIT: clears all on-screen displays and returns to TV viewing from any menu. 2.INPUT: Source input select 3.CH- /CH+ Program plus and minus, menu options 4.VOL-/VOL+ Volume increase and decrease, menu reset and entry 5.MENU Menu display 6. Power 7.Remote control signal receive window. 8.Remote Indicator I
Streszczenie treści zawartej na stronie nr. 7
Buttons and interface location Rear Control panel P42LV6-HD VGA IN COMPONENT IN DVI IN L R SWITCH AUDIO OUT VGA AUDIO Pr/Cr Pb/Cb Y L-AUDIO-R HDMI/DVI VIDEO AUDIO S C ART2 S C A R T 1 ANT IN AC-INPUT 1. AUDIO OUT: Connect to optional external speaker(s). 2.VGA IN(PC) Connect VGA analog cable from the PC to the VGA IN. Connect the audio cable from the PC to the VGA AUDIO IN. 3.COMPONENT IN Connect the component cables from the component output of the video
Streszczenie treści zawartej na stronie nr. 8
Remote controller Inserting Batteries 1.Slide open the 2.Load two AA alkaline 3.Replace the cover of the cover of the battery batteries in the compartment. battery compartment. compartment on the paying attention to the polarity back of the remote diagram in the battery controller. compartment.(plus and minus poles to respective mark) Precautions Make sure that two AA alkaline batteries As strong light may interfere the are loaded. The batteries must be of the signals, change
Streszczenie treści zawartej na stronie nr. 9
Keys of remote controller - The remote controller cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction STILL I/II (NICAM) Picture static SLEEP PIP Displaying sleep time, Power Off/Standby adjustable any other programmed MUTE STILL MUTE equipment off. Switches the sound on or off SLEEP PIP DISPLAY SCAN SCAN Program scan button DISPLAY Display ON/OFF ABC@ DEF Digits GHI$ MNO JKL% Program
Streszczenie treści zawartej na stronie nr. 10
Remote controller Effective range 45 right 45 left right 45 45 left front 8m front 8m POWER DISPLAY FAV. -/--/--- Q.VIEW SLEEP USB DISPLAY FAV. POWER -/--/--- Q.VIEW SLEEP USB PSM SSM TV/AV MUTE CH+ PSM SSM VOL- MENU VOL+ TV/AV MUTE CH- UP LEFT CH+ VOL- MENU VOL+ DOWN PREV. NEXT H.LOCK CH- UP LEFT PAUSE ENTER SWAP EXIT DOWN PREV. NEXT H.LOCK PAUSE ENTER above SWAP EXIT 20 20 below Ensure the remote controller is pointed toward the remote controller window on the display. No obstacles shoul
Streszczenie treści zawartej na stronie nr. 11
External Equipment Connections Antenna Connection Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. Mixer outdoor additional antenna purchase Antenna input 75 standard coaxial type SWITCH AC-INPUT AC power ANT IN socket 75 coaxial cable 300 twin-lead cable Plug Antenna adapter (additional purchase) Note * It is recommended that you'd b
Streszczenie treści zawartej na stronie nr. 12
External Equipment Connection NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some ways to connect your TV. Choose the connection which is best for you. VCR connection - To avoid picture noise (interference), leave an adequate distance between the VCR And TV. 1. Connect the SCART cab
Streszczenie treści zawartej na stronie nr. 13
External Equipment Connections DVD connection How to connect 1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the YUV IN jacks on the TV and connect the DVD audio outputs to the AUDIO IN jacks on the TV, as shown in the COMPONENT IN figure. 2. If your DVD only has an SCART output SCART2 SCART1 ANT IN Pr/Cr Pb/Cb Y L-AUDIO-R jack, connect this to the SCART input on the TV. as shown in the figure. NOTE: If your DVD player does not have component video output, use S-V
Streszczenie treści zawartej na stronie nr. 14
External Equipment Connections PC connection How to connect or DVI source. 1. To get the best picture quality, adjust the PC 4. Check the image on your TV. There may be noise associated with the resolution, graphics card to (>1024 x768),60Hz. vertical pattern, contrast or brightness in 2. Use the TV`s VGA IN port for video PC mode. If noise is present, change the connections, depending on your PC connector. PC mode to another resolution, change If the graphic card on the PC does not
Streszczenie treści zawartej na stronie nr. 15
External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. Note Prolonged use of headphones at a high volume SWITCH may damage your hearing. AC-INPUT ANT IN You will not receive sound from the speakers when you connect headphones to the system. Power source TO USE AC POWER SOURCE
Streszczenie treści zawartej na stronie nr. 16
Set up your TV -There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. -In the manual, the OSD(on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. Switching ON/OFF the TV set 1 Please press down the power switch to switch on AC power supply and the power indicator will light . 2 If the indicator is lighting in red, press button on the remote controlle
Streszczenie treści zawartej na stronie nr. 17
Select input modes Choose the input source If you hope to enjoy the picture from the external input source, before to select the source, you need to connect the devices, otherwise, when you select the source, the none or no signal will appears on the screen. MUTE STILL Source Press INPUT or TV/AV button on SLEEP PIP DISPLAY SCAN television or remote controller, ABC@ DEF the menu appears on the screen. GHI$ JKL% MNO Then press CH+/- to select the POR& STUV WXYZ TV item, and press VOL+ to
Streszczenie treści zawartej na stronie nr. 18
Tuning menu This TV set has three methods to set channels, which are respectively full automatic, manual search fine tune. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV set to set channel. Full automatic search mode Automatic search 1 Press MENU button and then CH+/- button, the icon to TUNING menu. MUTE STILL 2 Press the VOL+/- buttons to enter submenu, and press SCAN SLEEP PIP DISPLAY CH+/- button to select "country"
Streszczenie treści zawartej na stronie nr. 19
Tuning menu Program Table 1 Press MENU button and then CH+/- button, the icon to TUNING menu. 2 Press VOL+/- button to MENU enter submenu, and press MUTE STILL CH+/- button to select PICTURE Tuning Program AUDIO "Program Table", press Country England SCAN SLEEP PIP DISPLAY ADJUST VOL+ button to enter. Auto Search TUNING Program Table Or press CH.LIST button PIP Source HDMI/DVI ABC@ DEF FUNCTION on remote controller. PIP Position Center TIMER GHI$ JKL% MNO 3 Press CH+/- button to POR& S
Streszczenie treści zawartej na stronie nr. 20
Tuning menu Manual search If excessive channel signals of unwanted programs are received in local area, manual search function is recommended. 1 Press CH+/- buttons or the NUMBER 0-9 button to MUTE STILL choose desired searching frequency. (regard channel 18 as example). SCAN SLEEP PIP DISPLAY ABC@ DEF GHI$ JKL% MNO 2 After calling up the MENU POR& STUV WXYZ TUNING menu, press PICTURE CH+/- button *#() TV/AV SWAP Tuning Program AUDIO Country England to select "Tuning ADJUST Auto Sea
