Instrukcja obsługi Simplicity Manufacturing LEGACY XL

Streszczenie treści zawartej na stronie nr. 1

Hitch & Tube Group
Installation
Mfg. No. 1694545
For Legacy XL / 2027 / 2927 Series Garden Tractors
Instructions
Kit Contents:
Ref Part No. Qty. Description
1 1679896 1 CLAMP, Hose 6", Band Type
2 1679895 1 HOSE, Vac Col, 6 x 12
6
7
3 1930531 4 SCREW, Truss Head Phillips,
#10-32 x 1/2
4 1910531 8 WASHER, #10-32
5 1928919 4 NUT, Hex Washer Assembly,
#10-32
6 1675766 1 DECAL, Cleaning Instructions
11
7 1700773 1 TUBE & DECAL ASSEMBLY
9
(Includes Ref. No. 6)
10
5 8 1960268 4 CARRIAGE BOLT,
3
3/

Streszczenie treści zawartej na stronie nr. 2

Installation Instructions Hitch & Tube Group Standard Units 1. Slide capscrews (C, Figure 3) through one inner sup- H port (D), spacers (E), a second inner support (D) and tractor frame (I). Secure with lockwashers (F) and nuts (G). A 2. Install hitches and plate (A, Figure 3) by sliding clevis F pins (H) through tractor frame (I) as shown, one inner B support (D), hitch & plate (A) and second inner sup- D port (D). Secure with hair pin (B). E I Units with ROPS D C G 1. Slide capscrews (C, Fig

Streszczenie treści zawartej na stronie nr. 3

Hitch & Tube Group Installation Instructions DISCHARGE TUBE ASSEMBLY 1. Connect the flexible hose (F, Figure 6) and clear A plastic discharge tube (B). The two should overlap B by approximately 2”. C 2. Secure the tubes using truss head screws (E), wash- ers (D), and locknuts (C). Insert the screws from the D inside out and poke them through the flexible hose. E 3. Insert the upper end of the clear tube into the cart sleeve. Slide the flex hose (F) over the turbo (H) and F secure with the l

Streszczenie treści zawartej na stronie nr. 4

Installation Instructions Hitch & Tube Group NOTES MANUFACTURING, INC. Form No. 1726330-00 Rev. 12/2003 500 N Spring Street / PO Box 997 © 2003 Simplicity Manufacturing, Inc. All Rights Reserved Port Washington, WI 53074-0997 USA TP 200-4005-00-AT-SMAN 4