Instrukcja obsługi Canon MX410

Streszczenie treści zawartej na stronie nr. 1

Dedicated Fax Line
Setup Guide
MX360 or MX410
Next

Streszczenie treści zawartej na stronie nr. 2

Connecting The Phone Lines Previous Next

Streszczenie treści zawartej na stronie nr. 3

Connecting The Phone Lines Before Wall jack After Wall jack (Phone Cord included with Canon printer) Next Previous 3

Streszczenie treści zawartej na stronie nr. 4

If Your Wall Plate Has Two Jacks Use the jack that supports the fax line. Previous Next 4

Streszczenie treści zawartej na stronie nr. 5

If Your Wall Plate Has One Jack For Two Lines If your wall jack provides one jack for two phone lines, it would be best to use a “2 Line 3 Way Adapter.” This adapter can be purchased at most stores that sell electronics. This device creates three plugs where there was one. One jack will be for your voice line. The other jack can be used for your fax transactions. In most cases, line 1 (L1) is used for phone calls; L2 is used of faxing. The third jack (L1+L2) allows access to both lines. Thi

Streszczenie treści zawartej na stronie nr. 6

Fax to Phone Line Connection First, connect one end of the supplied telephone cord to the telephone jack on the wall. Wall Jack (Phone Cord included with Canon printer) Previous Next 6

Streszczenie treści zawartej na stronie nr. 7

Fax to Phone Line Connection Next, connect the other end of the supplied telephone cord to the lower jack (labeled “L”) on the MX360 or MX410. Wall Jack (Phone Cord included with Canon printer) Previous Next 7

Streszczenie treści zawartej na stronie nr. 8

Setting Up The Receive Mode Previous Next

Streszczenie treści zawartej na stronie nr. 9

Step 1 Step 2 Turn on the MX360 or MX410 by Press the FAX button. pressing the ON button. MX360 MX410 Previous Next 9

Streszczenie treści zawartej na stronie nr. 10

Step 3 Step 4 Press the Menu button Use the Left or Right Arrow button to select “Receive mode set”. Previous Next 10

Streszczenie treści zawartej na stronie nr. 11

Step 5 Step 6 Press the OK button The “Receive mode set” screen will appear Previous Next 11

Streszczenie treści zawartej na stronie nr. 12

Step 7 Step 8 Use the Left or Right arrow button Ensure that “Fax only mode” is to select “Fax only mode” displayed Previous Next 12

Streszczenie treści zawartej na stronie nr. 13

Step 9 Step 10 Press the OK button The “Make advanced settings?” screen will appear Previous Next 13

Streszczenie treści zawartej na stronie nr. 14

Step 11 Step 12 Press the FAX button Your MX360 or MX410 is now set to FAX only mode. Notice that the mode is listed on the fax standby screen. Previous Next 14

Streszczenie treści zawartej na stronie nr. 15

To Receive A Fax When a call comes in on the fax line, the MX360 or MX410 will answer the call and begin receiving the fax. You do not have to be home or interact with the MX360 or MX410 to receive a fax. Previous 15