Instrukcja obsługi Metra Electronics CHTO-013

Streszczenie treści zawartej na stronie nr. 1

CHTO-013 CHTO-013
CHRYSLER CAN BUS INTERFACE
AUDIO LEVEL CONTROL
*IMPORTANT WARNING POTENTIOMETER
AUDIO LEVEL
THIS PRODUCT INCLUDES INSTRUCTIONS FOR INSTALLATION
CHTO-013
ADJUSTMENT
WHICH MUST BE CAREFULLY FOLLOWED. THE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
ARE WORDED IN SUCH A MANNER TO ASSUME THAT THE
INSTALLER IS CAPABLE OF COMPLETING THESE TYPE OF
* READ IMPORTANT WARNING INSIDE
ELECTRONIC INSTALLATIONS. IF YOU ARE UNCLEAR AS TO
BEFORE ATTEMPTING ANY INSTALLATION
WHAT YOU ARE INSTRUCTED

Streszczenie treści zawartej na stronie nr. 2

CHTO-013 APPLICATIONS WIRING UP THE CHTO-013 CONNECTIONS TO BE MADE ON THE 14-PIN HARNESS CHRYSLER DODGE (cont.) * Important: Before beginning any of the following, disconnect the 1. Connect the blue/white wire to the radio’s amplifier turn-on wire. negative battery terminal to prevent accidental short circuit. 300 2008-UP* NITRO 2007-UP* 2. Connect the red wire to the radio’s Igniton or accessory wire. * NOTE: THE ACCESSORY POWER SOURCE OF MOST ALL ASPEN 2008-09* RAM 1500 2009-UP* CHRYLSER VE