Streszczenie treści zawartej na stronie nr. 1
*MX370X_E_050127 1/28/05 8:50 AM Page 1
MG3700A Vector Signal Generator
MX370x series software
MX3700xxA Waveform pattern
MX3701xxA IQproducer
Superior Expandability Supporting A Wide Variety Of Communication Systems
Streszczenie treści zawartej na stronie nr. 2
*MX370X_E_050127 1/28/05 8:50 AM Page 2 MX370x series software The MG3700A Vector Signal Generator (hereafter referred to as “MG3700A”) is a signal generator that integrates a 160-MHz high-speed ARB baseband generator. With features that include a broadband vector modulation bandwidth and large-capacity ARB memory, it supports digital modulation signals for a variety of communication systems. The MG3700A provides optimal performance for generating signals for new wireless communications in ad
Streszczenie treści zawartej na stronie nr. 3
*MX370X_E_050127 1/28/05 8:50 AM Page 3 The standard waveform Waveform patterns are transferred from patterns are saved on the the HDD to ARB memory. MG3700A hard disk. MG3700A Vector Signal Generator ARB memory HDD 40GB 1 GB = 256 M samples (Std) W-CDMA 2 GB = 512 M samples (Opt) GSM/EDGE Memory A CDMA2000 CDMA2000 1xEV-DO PDC PHS WLAN Output signal Memory B AWGN Waveform patterns can be selected from both ARB TD-SCDMA memories A and B, and one of the following Public r
Streszczenie treści zawartej na stronie nr. 4
*MX370X_E_050127 1/28/05 8:50 AM Page 4 W-CDMA waveform pattern Standard For testing receivers and performance of UE ■ W-CDMA waveform pattern: • (TS 25.101 DL RMC 12.2 to 384 kbps) The W-CDMA waveform patterns listed below are provided on DL_RMC_12_2kbps_RX the MG3700A internal hard disk as standard (see the next page DL_RMC_12_2kbps for details): DL_RMC_12_2kbps_MIL DL_RMC_12_2kbps_ACS For evaluating transmitter device of BS DL_RMC_64kbps • (TS 25.141 Test Model 1 to 4) DL_RMC_144kbps TestM
Streszczenie treści zawartej na stronie nr. 5
*MX370X_E_050127 1/28/05 8:50 AM Page 5 W-CDMA waveform pattern Standard W-CDMA waveform pattern list • Waveform pattern UL/ DL Channel 3GPP (Release1999) Evaluation UL_RMC_12_2kbps DPCCH, DPDCH TS25.104 A.2 UL_RMC_12_2kbps_ACS DPCCH, DPDCH ∗1 UL_RMC_64kbps DPCCH, DPDCH TS25.104 A.3 ∗1 UL_RMC_144kbps DPCCH, DPDCH TS25.104 A.4 ∗1 UL_RMC_384kbps DPCCH, DPDCH TS25.104 A.5 UL_AMR_TFCS1 DPCCH, DPDCH BS RX test UL UL_AMR_TFCS2 DPCCH, DPDCH UL_AMR_TFCS3 DPCCH, DPDCH TS25.944 4.1.2 ∗1 UL_ISDN DPCCH
Streszczenie treści zawartej na stronie nr. 6
*MX370X_E_050127 1/28/05 8:50 AM Page 6 W-CDMA waveform pattern Standard ■ ACPR: The adjacent channel leakage power ratio of a Vector Signal Generator is an important factor in device distortion testing and receiver interference testing. W-CDMA ACPR (Test Model 1, 64 DPCH, 1carrier) W-CDMA ACPR (Test Model 1, 64 DPCH, 4carrier) x Waveform pattern [Test_Model_1_64DPCH] Waveform pattern [Test_Model_1_64DPCH 4] ■ CCDF: CCDF (Test Model 1, 64 DPCH, 1carrier) CCDF (Test Model 1, 64 DPCH, 4carrier)
Streszczenie treści zawartej na stronie nr. 7
*MX370X_E_050127 1/28/05 8:50 AM Page 7 W-CDMA waveform pattern Standard ■ AWGN (Additive White Gaussian Noise) Supports Dynamic Range Test When performing the receiver dynamic range test specified by 3GPP, AWGN with a W-CDMA modulation signal is required. Either of the AWGN waveform patterns AWGN_3_84MHz_x2 or AWGN_3_84MHz_x1_5, which are stored on the MG3700A internal hard disk, can be used for an AWGN signal. Since a single MG3700A can add a W-CDMA uplink modulation signal and AWGN signal
Streszczenie treści zawartej na stronie nr. 8
*MX370X_E_050127 1/28/05 8:50 AM Page 8 CDMA2000 1xEV-DO waveform pattern Standard ■ CDMA2000 1xEV-DO waveform pattern: Access terminal (AT) receiver test • CDMA2000 1xEV-DO forward The CDMA2000 1xEV-DO waveform patterns listed on the right Base band filter: IS-95SPEC +EQ ∗ are provided on the MG3700A internal hard disk. Data: PN15fix (excluding FWD-Idle) The signals for testing the receiver and transmitter of the FWD_38_4kbps_16slot CDMA2000 1xEV-DO access network (base station) and FWD_76_8
Streszczenie treści zawartej na stronie nr. 9
*MX370X_E_050127 1/28/05 8:50 AM Page 9 CDMA2000 1xEV-DO waveform pattern Standard Access network (AN) receiver test • GPP2 C.S0032 standard receiver tests (PER: Packet Error Rate) can be performed by selecting a reverse signal pattern required for testing the AN. Since access terminal simulator protocols are not supported, an external controller must be used to control the AN and calculate PER. MG3700A Vector Signal Generator ∗ ∗ Trigger , Clock Modulation signal (Uplink) AN control, PER ca
Streszczenie treści zawartej na stronie nr. 10
*MX370X_E_050127 1/28/05 8:50 AM Page 10 CDMA2000 waveform pattern Standard ■ CDMA2000 waveform pattern: The CDMA2000 waveform patterns listed in the table below are provided on the MG3700A internal hard disk. CDMA2000 modulation signals specified in 3GPP2 C.S0002-0-2 can be output by selecting one of these CDMA2000 waveform patterns. Since reverse channel signals are output by channel coding 1 ∗ (convolutional coding, etc.) 4-frame length PN9 fix data, it is 2 ∗ useful for Frame Error Rate (
Streszczenie treści zawartej na stronie nr. 11
*MX370X_E_050127 1/28/05 8:50 AM Page 11 GSM/EDGE waveform pattern Standard ■ GSM/EDGE waveform pattern: The GSM/EDGE waveform patterns listed in the table below are provided on the MG3700A internal hard disk. The signals suitable for testing receivers and for managing device evaluation in a GSM/EDGE system can be output by selecting one of these GSM/EDGE waveform patterns. GMSK_PN9, 8PSK_PN9 • PN9 data is inserted into the entire area of the slots, except the guard. The PN9 data in each slo
Streszczenie treści zawartej na stronie nr. 12
*MX370X_E_050127 1/28/05 8:51 AM Page 12 PHS waveform pattern Standard ■ PHS waveform pattern: The PHS waveform patterns listed in the table below are provided on the MG3700A internal hard disk. The signals for testing CS (base station) and PS (mobile station) receivers, which are specified in RCR STD-28, can be output by selecting one of these PHS waveform patterns, without setting any complex RCR STD-28 parameters. When a signal that has parameters different from those of the provided wav
Streszczenie treści zawartej na stronie nr. 13
*MX370X_E_050127 1/28/05 8:51 AM Page 13 PDC waveform pattern Standard ■ PDC waveform pattern: The waveform patterns for the wanted signals/interfering signals required to execute transmission/reception tests as specified in ARIB STD-27 are provided on the MG3700A internal hard disk. Modulation signals conforming to the standard can be output without any options (Note: Check the parameters listed on the next page in advance). The waveform pattern to output uplink/downlink Slot 0 data only and
Streszczenie treści zawartej na stronie nr. 14
*MX370X_E_050127 1/28/05 8:51 AM Page 14 PDC Packet waveform pattern Standard ■ PDC Packet waveform pattern: The four types of waveform patterns listed in the table below are provided on the MG3700A internal hard disk. The signals for testing base station and mobile station receivers for UPCH communications, which are specified in RCR STD-27, can be output by selecting one of these waveform patterns, without setting any complex RCR STD-27 parameters. Also, the Downlink3 data rate UPHC patter
Streszczenie treści zawartej na stronie nr. 15
*MX370X_E_050127 1/28/05 8:51 AM Page 15 WLAN waveform pattern Standard ■ WLAN waveform pattern: The WLAN (IEEE802.11a/b/g) waveform patterns listed in the table below are provided on the MG3700A internal hard disk. The signals for testing the receiver/transmitter of a terminal or module can be output by selecting one of these WLAN waveform patterns. Example of selecting waveform pattern IEEE_802.11a waveform pattern list • Data rate Coding bits per Coding bits per Data bits per Waveform pat
Streszczenie treści zawartej na stronie nr. 16
*MX370X_E_050127 1/28/05 8:51 AM Page 16 AWGN waveform pattern Standard ■ AWGN waveform pattern: The Additive White Gaussian Noise (AWGN) waveform pat- terns listed in the table below are provided on the MG3700A internal hard disk. The signals for testing the receiver/transmitter of a terminal or module can be output by selecting one of these AWGN waveform patterns. Example of selecting a waveform pattern MAX peak/RMS 3dB bandwidth In-band power Waveform pattern Evaluation ∗ ratio (MHz) conv
Streszczenie treści zawartej na stronie nr. 17
*MX370X_E_050127 1/28/05 8:51 AM Page 17 AWGN waveform pattern Standard ■ With the waveform combine function, a single MG3700A outputs a signal that is the addition (such as modulation signal + AWGN) of the wanted signal and interfering signal: The MG3700A has ARB memory that consists of two memory areas, each allowing one waveform pattern to be set. The addition of the signals from the two memories, as well as the signal for either one, can be output. For example, if a wanted signal (W-CDMA
Streszczenie treści zawartej na stronie nr. 18
*MX370X_E_050127 1/28/05 8:51 AM Page 18 MX370001A TD-SCDMA waveform pattern Optional ■ TD-SCDMA waveform pattern: ■ Simple operation and high speed signal pattern change: The signals corresponding to the 3GPP 1.28Mcps TDD options can be output by installing the MX370001A TD-SCDMA Typical waveforms specified in 3GPP, such as the reference waveform pattern on the MG3700A. management channel, can be output simply by selecting the For evaluating transmitter of BS • For evaluating receiver of UE
Streszczenie treści zawartej na stronie nr. 19
*MX370X_E_050127 1/28/05 8:51 AM Page 19 MX370001A TD-SCDMA waveform pattern Optional Waveform patterns for evaluating BS receivers • BS Receive Test (UL) Target of test BS Test signal BS-UL RMC Waveform patterns rmc12_2k_bs_ul rmc12k_ocns_bs_ul rmc64k_ocns_bs_ul rmc144k_bs_ul rmc384k_bs_ul RS / Min. Input Lev./ Test Dynamic range/ACS/ Performance Req. Performance Req. Performance Req. Performance Req. Blocking /Rx IM Standard TS25.142 DwPTS/UpPTS/SYNC_DL/UL ————— NUMBER (quadruples) P-CCPCH
Streszczenie treści zawartej na stronie nr. 20
*MX370X_E_050127 1/28/05 8:51 AM Page 20 MX370001A TD-SCDMA waveform pattern Optional ■ Frame configuration UL-RMC12.2 kbps: For BS receiver test (Uplink): • TS-25.142: BS UL reference measurement channel p132, A2.1.2, 1.28 MCps, SF = 8 Test items: 7.2 Reference sensitivity level / 7.3 Dynamic range / 7.4 Adjacent Channel Selectivity (ACS) / 7.5 Blocking characteristics / 7.6 Inter modulation characteristics Time slot Dw GP Up Time slot Time slot Time slot Time slot Time slot Time slot
