Streszczenie treści zawartej na stronie nr. 1
DIGITAL RECORDER
INSTALLER’S MANUAL
MODEL
DX-TL5000E
SLD Security & Communications
The Old Forge, Ockham Lane, Ockham, Surrey GU23 6PH England
Phone +44.1483225633 · Fax +44.1483225634
sales@sld.co.uk · www.sld.co.uk
THIS INSTRUCTION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL RECORDER.
1
OTHERS ENGLISH
Streszczenie treści zawartej na stronie nr. 2
Features DX-TL5000E is a digital recorder that is equipped with HDD as its main memory and 16ch triplex multiplexer. Addition to these features, this system has a very sophisticated video signal and data processing technique that provides high quality picture, stable operation and reliability. The graphical user interface and pointing devices make the operation very easy and comfortable in live monitoring and also in the handling of data from recording to export. The system offers excellent perf
Streszczenie treści zawartej na stronie nr. 3
Microsoft is either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other company and product names appearing herein are the property of their respective owners. ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning 3 ENGLISH
Streszczenie treści zawartej na stronie nr. 4
Caution and care HEAVY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR) NEVER TOUCH OR INSERT ANY OBJECT INSIDE THE UNIT Touching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not only creates a safety hazard but can also cause extensive damage. PROTECT THE POWER CORD Damage to the power cord may cause fire or shock hazard. If the mains cord is damaged, turn OFF the MAIN switch and carefully unplug the cord by hold
Streszczenie treści zawartej na stronie nr. 5
Notice about construction of the surveillance system using this unit • This unit can be controlled by the external devices via RS-232C terminal or LAN terminal. This unit can also be used to control the external devices via external terminal, RS-422/485, or RS-232C terminal. Owning to these functions, this unit flexibly applies to the high grade security system, but the whole surveillance system may be affected by the malfunction of this unit or the external devices depending on the setting cont
Streszczenie treści zawartej na stronie nr. 6
Contents Features ................................................................ 2, 3 Caution and care .................................................. 4, 5 Recording ..........................................................46-50 Settings concerning normal recording and alarm recording Contents................................................................ 6, 7 .......................................................................................... 46 Flowchart .............
Streszczenie treści zawartej na stronie nr. 7
Communications by Web Browser ................ 93-101 Communications by Web Browser .................................... 93 COM/LAN .......................................................... 68, 69 The personal computer product requirements ............ 93 RS-232C Setting ............................................................... 68 Connections ................................................................ 93 RS-485 Cascade Setting ...........................................
Streszczenie treści zawartej na stronie nr. 8
Flowchart Flowchart for connection and settings This is a flowchart of the example operation: Making connections of the terminal on the rear panel Setting the alarm area in the main device Making the initial settings Making an alarm recording with timer recording Searching recorded data using the alarm list Playback the recorded data Copying the data to a copy device. Connections Connections • Connections for camera, monitor, and sensor. • Connections for camera, monitor, and sensor. See
Streszczenie treści zawartej na stronie nr. 9
Setting the motion detection Copy the data • Selecting the camera number. • Setting the copy device. • Setting the detection areas. See “ Add/Remove HDD Device” or “ Add/ Remove DVD/CD Drive” on pages 73, 74. • Setting the sensitivity. • Setting the minimum number of dots for starting the • Setting the copy function. See “ Copy Data to Copy A Drive” or “ Copy motion detection operation. Data to Copy B Drive” on pages 42, 43. • Setting the detection interval. See “Motion Det” on pages 53, 54.
Streszczenie treści zawartej na stronie nr. 10
Major operations and their functions Front view 17 18 19 20 21 BUSY PUSH 1 2 3 4 5 6 7 8 9 10 11 12 13141516 1. POWER indicator 10. COPY 1 indicator Illuminates while the MAIN switch on the rear panel Illuminates while performing copy A operation. is turned on and the POWER button is pressed. Flashes when starting or ending the copy A Turns off while the unit is in stand-by mode or MAIN operation. switch on the rear panel is turned off. It takes about 11. COPY 2 indicator 1 or 2 minutes from pre
Streszczenie treści zawartej na stronie nr. 11
Camera control buttons 20. JOG dial The following buttons control the camera when Forwards or rewinds the picture during playback pressed during PTZ mode in the single screen (frame-by-frame). display. Use the following buttons after pressing PTZ Uses for controlling the camera connected. button. 21. Camera number buttons (1 to 16) CAMERA ZOOM button Displays the picture supplied from the camera Adjusts the camera zoom. Press this button and then connected. The number of the button corresponds t
Streszczenie treści zawartej na stronie nr. 12
Major operations and their functions (continued) Front view (inside of the door) 25 26 28 27 22 23 24 29 30 31 32 33 22. POWER button 30. TRIPLEX PB button Turns on the power when pressing while the MAIN Inserts the playback picture of the desired camera switch on the rear panel is set to ON. When the number while displaying the picture supplied from button is pressed again, the unit switches to stand- the camera. by mode. The POWER button operation is not 31. BOOK MARK button accepted while the
Streszczenie treści zawartej na stronie nr. 13
Rear view 3 45 6 8 9 10 7 AUDIO IN IN VIDEO VIDEO 1234 5678 1 2 OUT OPTION SLOT 3 4 Y/C CAMERA OUTPUT A OUTPUT B OUT IN CLAMPER AUDIO CASCADE IN OUT IN 9 101112 13141516 OUT AUDIO OUT VIDEO CASCADE SERIAL BUS SERIAL BUS LAN-A LAN-B CLAMPER 100 10 100 10 RESET STORAGE COM AC IN~ ALARM OUT ALARM IN P T Z GND RS485 RS485 MAIN OUT IN RS-232C 100-240V OFF ON 1 2 11 12 13 14 15 16 17 OUTPUT B connector 1. MAIN switch Output connector for video signal to monitor (BNC This is the main power switch. Whe
Streszczenie treści zawartej na stronie nr. 14
Major operations and their functions (continued) Rear view (continued) 3 45 6 7 8 9 10 AUDIO IN IN VIDEO VIDEO 1234 5678 1 2 OUT OPTION SLOT 3 4 Y/C OUTPUT A OUTPUT B CAMERA OUT IN CLAMPER AUDIO CASCADE IN OUT IN 9 101112 13141516 OUT AUDIO OUT VIDEO CASCADE SERIAL BUS SERIAL BUS LAN-A LAN-B CLAMPER 100 10 100 10 RESET STORAGE COM AC IN~ ALARM OUT ALARM IN P T Z GND RS485 RS485 MAIN OUT IN RS-232C 100-240V OFF ON 1 11 2 12 13 14 15 16 17 MODE OUT 1 to MODE OUT 4 terminals 13. ALARM IN terminals
Streszczenie treści zawartej na stronie nr. 15
Connections Precautions for installation Precautions for attaching or removing the HDD • Do not attach or remove the HDD unnecessarily. Attaching or removing the HDD of DX-TL5000E is intended to replace the faulty HDD or add the HDD when starting operation for the first time because of the structure of the connectors. It is not presumed to be used as a removable HDD. • Make sure that the POWER button on the front panel and the MAIN switch on the rear panel are both turned OFF when attaching or r
Streszczenie treści zawartej na stronie nr. 16
Connections (continued) Connecting to CCTV camera, monitor, and sensor VIDEO MONITOR To VIDEO IN or S(Y/C) IN connector To OUTPUT A VIDEO or OUTPUT A S(Y/C) connector One of either codes should be connected. Clamp the power cord using the supplied cable clamping band in order to prevent the To VIDEO IN accidental removal of the cable. ( See page 22.) connector To OUTPUT B CAMERA #1 Up to 16 cameras connector VIDEO MONITOR Clamp the USB cable using the supplied To CAMERA IN 1 connec
Streszczenie treści zawartej na stronie nr. 17
Alarm recording connection The diagram below shows an example of connection for alarm signals corresponding to sensor number 1. ALARM OUT ALARM IN GND RS-232C ALARM SWITCH EMERGENCY/ALARM IN/REC/ MODE OUT 1 - 4 Output terminal ALARM OUT Output terminal CLOCK ADJ Input terminal • Output Circuit • Output Circuit • Input Circuit 5V 0.047µ F 10kΩ 5V MODE OUT 22kΩ Input Output terminal terminal GND terminal GND 4.7kΩ
Streszczenie treści zawartej na stronie nr. 18
Connections (continued) Cascade connection VIDEO MONITOR (MASTER) VIDEO MONITOR (LOCAL) To VIDEO CASCADE OUT Up to 16 cameras To CAMERA IN AUDIO IN IN 1234 5678 VIDEO VIDEO OUT 1 2 To OUTPUT B OPTION SLOT 3 4 Y/C CAMERA OUTPUT A OUTPUT B To AUDIO CAMERA OUT IN CLAMPER AUDIO CASCADE CASCADE IN IN OUT IN 9 101112 13141516 DX-KB5UE OUT AUDIO OUT VIDEO CASCADE KEY BOARD SERIAL BUS SERIAL BUS LAN-A LAN-B (Soon to be on sale) CLAMPER 100 10 100 10 RESET STORAGE COM AC IN~ GND ALARM OUT ALARM IN P
Streszczenie treści zawartej na stronie nr. 19
step4. Remove the metal part. Attaching or removing the HDD • Remove 4 screws on the metal part. Up to 3 HDDs can be mounted on this unit. The attaching, removing and replacing method of the HDDs are as follows. • Turn off the MAIN switch on the rear panel before attaching or removing the HDD. • When attaching multiple HDDs, attach in the order of HDD A, B, and C. When removing a HDD step1. Push the left end of each screw covers on both sides of the cover to open. step5. Pull out the HDD tray ha
Streszczenie treści zawartej na stronie nr. 20
Connections (continued) step4. Insert the hard disk tray completely. When attaching a HDD step1. Attach the new HDD onto the HDD tray with four screws. • Make sure to attach the HDD in the correct direction. • When attaching the additional HDD to HDD B or C, use the supplied screws. step5. Attach the metal part. • Adjust the upper side first, then push the lower side into the unit. • Take care not to deform the springs. Spring step2. Insert the hard disk tray halfway. step6. Fix the metal part w
