Streszczenie treści zawartej na stronie nr. 1
User Manual
EMV200 DVR
EMV200 DVR
Streszczenie treści zawartej na stronie nr. 2
E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N EMV200 DVR Instruction Manual 2010 EverFocus Electronics Corp www.everfocus.com All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. Release Date: Apr. 2011 QuickTime is a registered trademark of the Apple Computer, Inc. Windows is a registered trademark of the
Streszczenie treści zawartej na stronie nr. 3
SAFETY PRECAUTIONS Ventilation Slots: Do not block the ventilation openings or slots on the cover. Limits for Temperature, Humidity and Power: Do not operate the device beyond its specified temperature, humidity or power source ratings. Do not use the device in environments with very high temperature or humidity. Use it at temperatures between -20~55ºC (-4~131ºF). The input power source for this device is 10~36VDC. Servicing: Do not attempt to service this unit by yourself. Do not
Streszczenie treści zawartej na stronie nr. 4
ATTENTION! T T Th h hiiis s s iiis s s a a a c c cllla a as s ss s s A A A p p pr r ro o od d du u uc c cttt w w wh h hiiic c ch h h m m ma a ay y y c c ca a au u us s se e e r r ra a ad d diiio o o iiin n nttte e er r rfffe e er r re e en n nc c ce e e iiin n n a a a d d do o om m me e es s stttiiic c c e e en n nv v viiir r ro o on n nm m me e en n nttt;;; iiin n n tth hiis s c ca as se e,, tth he e u us se er r m ma ay y b be e u ur rg ge ed d
Streszczenie treści zawartej na stronie nr. 5
TABLE OF CONTENTS 1 PRODUCT OVERVIEW ..................................................................................................... 1 1.1 FEATURES ........................................................................................................................... 1 1.2 PACKAGE CONTENTS ......................................................................................................... 2 1.3 SPECIFICATIONS ................................................................
Streszczenie treści zawartej na stronie nr. 6
4.2.1 Normal ................................................................................................................................................... 24 4.2.2 Video Adjust .......................................................................................................................................... 25 4.2.3 Alarm ..................................................................................................................................................... 26 4.3 R
Streszczenie treści zawartej na stronie nr. 7
5.8 DIRECT HIGH SPEED MODEM CONNECTION ............................................................................... 67 5.9 ROUTER OR LAN CONNECTION................................................................................................ 68 6 REMOTE OPERATION FROM BROWSER ............................................................................. 71 6.1 CONNECTING TO EMV200 ............................................................................................... 71 6.2 BRO
Streszczenie treści zawartej na stronie nr. 8
Chapter 1 1 PRODUCT OVERVIEW Full featured video surveillance in the palm of your hand: the EverFocus EMV200 digital video recorder features a built-in GPS receiver with antenna to track location and H.264 compression technology for efficient recording and fast, high quality network image transmission. Record real-time video with audio on both channels (up to 30/25fps per channel @ D1 resolution). Its ultra compact size allows easy installation almost anywhere. In a vehicle, for fast de
Streszczenie treści zawartej na stronie nr. 9
1.2 PACKAGE CONTENTS - Digital Video Recorder x1 - Screws x 1 pack with Plum wrench - GPS Antenna x 1 set - IR Remote Control x 1 - Battery x 2 - Camera Power cable x 1 - Video & Audio cable x 1 - RS232/Alarm cable x 1 1.3 SPECIFICATIONS E E E EM M M MV V V V2 2 2 20 0 0 00 0 0 0 - - - - 2 2 2 2C C C CH H H H M M M Mo o o ob b b biiiilllle e e e D D D DV V V VR R R R Video Format NTSC/PAL (au
Streszczenie treści zawartej na stronie nr. 10
Event Alarm SD card error, SD card temperature, SD card Full, SD card missing, Power Loss, Network Loss, GPS loss, GPS speed, GPS fencing Email alert Multiple email notifications in response to alarms and events. (Requires real time network connectivity though cellular device). GPS Function Embedded GPS Sensor(optional external GPS antenna required) for speed and geographic limit alarms (rectangular or circular fencing) Configuration Method On screen menu with ‘portable monitor friendly
Streszczenie treści zawartej na stronie nr. 11
1) SD Card Slot: Slot to insert SD card. 2) IR Receiver: Receiver for IR remote control. 3) Alarm Input(2), Alarm Output(1) & RS232: Alarm Input (2) - Connect up to 2 alarm inputs, selectable between N.O./N.C. contacts. Alarm Output (1) - N.C or N.O type alarm out (form “C”). RS232 - Connect to RS232/RS485 compatible device. 4) Power LED: This LED ON indicates Power on. 5) Network Connector: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the LAN jack; Green LED me
Streszczenie treści zawartej na stronie nr. 12
3 ○ ○ Video & Audio Input/Output: ○ ○ Video Inputs (2): Connect camera’s video output or other composite video source to the video input connection. Audio Input (1): Connect line level output of an audio preamplifier to the audio input connection corresponding to the appropriate camera. Video Output (1): Monitor for live and playback display and on-screen display. Audio Output (1): Connect to the line level input of an audio amplifier 4 ○ ○ ○ ○ USB port: USB port recommended for c
Streszczenie treści zawartej na stronie nr. 13
1.6 FRONT & REAR PANEL CONNECTOR Alarm/RS232 GND GND GND RS232-RXD1 RS232-TXD1 ALARM_OUT ALARM_IN ALARM_COM ALARM_IN_1 GND Audio/Video VIN1 VIN2 TV_OUT AUDIO_IN AUDIO_OUT GND GND GND GND GND Power In ING_IN GND GND DC12V 1.7 INSTALLATION OF EMV200 Step 1. Please put your EMV200 on the suitable location of vehicle. Please see the figure below. Step 2. Please
Streszczenie treści zawartej na stronie nr. 14
Now you have completed all mounting procedures. Possible Installation Locations Inside the Automobile Vehicle: Truck Glove box (inside or underneath) Drive seat (between seat and wall) or Passenger seat (underneath) (Users are suggested to use “support” for mounting option) Show the wiring on the wiring harness that connects to the electrical system. 7
Streszczenie treści zawartej na stronie nr. 15
Possible Installation Locations Inside the Automobile Vehicle Glove box (inside or underneath) Trunk (Users are suggested to use “suspend” for mounting option) Passenger seat (underneath) Drive seat (between seat and wall) Show the wiring on the wiring harness that connects to the electrical system. 8
Streszczenie treści zawartej na stronie nr. 16
Installing the Camera(s) and Monitor The DVR is typically connected to one camera installed inside the car. Other camera(s) can also be installed in different locations (for example, use the waterproof camera to the outside of vehicle). For installation procedure, please refer to the guide that came with the camera(s) you purchased. The Monitor power supply connects from the Automotive adapter (cigarette plug) Monitor and cameras must be purchased separately. LCD Monitor
Streszczenie treści zawartej na stronie nr. 17
1.8 VIDEO INPUTS/OUTPUTS INSTALLATION Cameras and CCTV monitors must use copper center conductor/copper braid 75 Ohm video cable (e.g. RG-59, RG-6, RG-11) with BNC connectors. To avoid impedance mismatch and undesired loss/reflections, 50 Ohm coax cable (e.g. RG-58), or 75 ohm foil shield antenna cable and other types of coaxial cable are not compatible. All connected video sources must provide a 1 Vpp NTSC or PAL standard video signal. When converting other transmission types (twist
Streszczenie treści zawartej na stronie nr. 18
1.10.1 Alarm Input Contacts This DVR provides one alarm input per camera. All inputs are programmable N.O. (Normal Open) or N.C. (Normal Closed) Inputs have to be switched by dry contacts. All settings are programmed in the ALARM menu (Section 0). Alarm input with N.O. (Normal Open) contact Alarm input with N.C. (Normal Closed) contact in idle state in idle state 1.10.2 Alarm Output Relay The relay output provides either Normally Open or Normally Closed dry contac
Streszczenie treści zawartej na stronie nr. 19
1.12 NETWORK CONNECTION This section only describes physical connection to an Ethernet network. This step must be completed before the DVR can connect to the network. There are two basic types of connection: 1.12.1 Direct PC Connection through Crossover Network Cable The point-to-point connection of DVR and PC requires a crossover (crossed) network cable. This type of connection is ONLY used for direct connection to a single PC. Make sure that the PC is equipped with a 10/100 Mbps c
Streszczenie treści zawartej na stronie nr. 20
1.12.2 Network Connection through Patch Cable The connection to an existing network requires a normal patch cable (straight-through). The illustration shows the connection to a network switch or router. Figure 1-4 Network Connection through Patch Cable Pinout of straight patch cable 1.13 FINAL INSTALL PROCESS Once you have completed the basic wiring connections, you are ready to turn on the DVR. Simply plug in the power source. The POWER LED will light up if powe
