Streszczenie treści zawartej na stronie nr. 1
DSD-9502T 2006.9.13 2:16 PM ˘ ` 1 mac001 1200DPI 90LPI
USER’S GUIDE
DSD-9502T/9503T
Twin digital terrestrial Receiver &
Hard disc Recorder
Streszczenie treści zawartej na stronie nr. 2
DSD-9502T 2006.9.13 2:16 PM ˘ ` 1 mac001 1200DPI 90LPI Introduction Thank you for purchasing the Digital PVR. Equipped with the latest technology and design, the DSD-9502T/9503T is a set-top box ideal for digital terrestrial broadcast reception. The simple installation and operation, user- friendly three-dimensional OSD, Digital audio output with Dolby Digital ready, and advanced video clarity made for TV and VCR are all designed to enrich the viewer experience. As a digital set-top box,
Streszczenie treści zawartej na stronie nr. 3
DSD-9502T 2006.9.13 2:16 PM ˘ ` 2 mac001 1200DPI 90LPI Important care and safety advice This Digital PVR has been manufactured to meet international safety standards, but you must take care to operate it safely. It is important that you read these safety instructions. If you have any doubts about the installation, operation, or safety of this Digital PVR, contact Daewoo, as shown in the next page. The lightning flash with arrowhead CAUTION symbol, within an equilateral triangle, is RISK OF
Streszczenie treści zawartej na stronie nr. 4
DSD-9502T 2006.9.13 2:16 PM ˘ ` 3 mac001 1200DPI 90LPI Important care and safety advice Cleaning • Cleaning : always disconnect from the mains supply before cleaning. Wipe with a lint- free cloth or one that has been slightly dampened with clean water. Never use detergents, liquid cleaners. Unplug when not in use • When not in use for an extended period, unplug the Digital PVR from the mains outlet. Do not overload wall outlets and extension adapters as this can result in a risk of fire or
Streszczenie treści zawartej na stronie nr. 5
DSD-9502T 2006.9.13 2:31 PM ˘ ` 4 mac001 1200DPI 90LPI Table of Contents Introduction ____________________________________________________________ 1 Important care and safety advice ____________________________________________2 Table of Contents _______________________________________________________ 4 Package contents ________________________________________________________4 Front Panel ____________________________________________________________ 5 Rear Panel ______________________________
Streszczenie treści zawartej na stronie nr. 6
DSD-9502T 2006.9.13 2:16 PM ˘ ` 5 mac001 1200DPI 90LPI Front Panel 1 23 456 78 1 Power On indicator 2 Remote indicator 3 Hard disk drive indicator ; will be visible when hard disk drive is in use ie when in record or time shift mode. 4 Menu Button ; allows access to on screen menu. 5 OK button ; can be used to select a menu or confirm menu options. 6 Standby Button ; switches between Operation and Standby modes. 7 Menu up/down Buttons ; can be used for moving up and d
Streszczenie treści zawartej na stronie nr. 7
DSD-9502T 2006.9.13 2:16 PM ˘ ` 6 mac001 1200DPI 90LPI Rear Panel 1 2 3 TV L RF IN 100-240V- R S/PDIF 50/60Hz, 18W OUT VCR DVD Manufactuered under license from Dolby Laboratories. DIGITAL TERRESTRIAL RECEIVER AUDIO "Dolby" and the double-D symbol are HARD DISC RECORDER OUT RF OUT trade marks of Dolby Laboratories. MADE IN UK 4 5 6 1 RF IN ; connects your aerial. 2 Audio L/R ; connects to your TV or VCR and outputs audio signals. 3 T V Scart ; connects a T V SCART cable. 4 RF OUT ; connects
Streszczenie treści zawartej na stronie nr. 8
DSD-9502T 2006.9.13 2:16 PM ˘ ` 7 mac001 1200DPI 90LPI Remote Control 1 Mute ; pauses the audio temporarily. 2 TV/DVR ; switches between DVR and TV. 3 Number buttons 4 EPG ; Electronic Programme Guide 5 Menu ; choose and change a wide range of PVR’s features. Or exit the menu. 6 Arrow buttons ; allows you to move through menu’s. Or navigates in playback mode. 7 Record ; initialises the record - see relevant section in this manual. 8 Channel +/- ; allows you to change channel. 9 Playback c
Streszczenie treści zawartej na stronie nr. 9
DSD-9502T 2006.9.13 2:16 PM ˘ ` 8 mac001 1200DPI 90LPI Connecting the PVR SCART connections offer the best picture and sound quality. They can also tell your TV when the Digital PVR is switched on and off and whether widescreen pictures are being broadcast. Therefore this is the way this box has been designed to be connected. 1. Connect your aerial to the Digital PVR. • Make sure your TV is switched off, together with any other equipment you are connecting to it. • Insert the cable from yo
Streszczenie treści zawartej na stronie nr. 10
DSD-9502T 2006.9.13 2:16 PM ˘ ` 9 mac001 1200DPI 90LPI Connecting the PVR Option 2: connecting to a TV and VCR • Connect the SCART cable between the VCR socket on your Digital PVR and your VCR’s SCART IN socket. • Connect a SCART cable between the SCART TV socket on your Digital PVR and your TV SCART IN socket. • Connect an RF cable between the ‘RF OUT’ socket on the Digital PVR and the RF input socket on your VCR. • If there isn’t already one in place, connect a second RF cable between
Streszczenie treści zawartej na stronie nr. 11
DSD-9502T 2006.9.13 2:16 PM ˘ ` 10 mac001 1200DPI 90LPI Connecting the PVR refer to your TV manual. • If you cannot see the picture from the Digital PVR, please refer to the “where to get more help” section towards the end of this user’s guide. You are now ready to tune in to the digital TV service. 1 10 0
Streszczenie treści zawartej na stronie nr. 12
DSD-9502T 2006.9.13 2:16 PM ˘ ` 11 mac001 1200DPI 90LPI Installation wizard Using your Digital PVR for the first time. The first time you use your Digital PVR, you will see a screen like the one below. The Digital PVR now needs to scan for available Digital TV channels. • Press [OK] on your Digital PVR’s remote control to begin searching for digital channels. The search will take between 2 and 5 minutes, depending on the digital TV service in your area. • As channels are found, their names
Streszczenie treści zawartej na stronie nr. 13
DSD-9502T 2006.9.13 2:16 PM ˘ ` 12 mac001 1200DPI 90LPI Basic Operation This chapter describes functions such as switching channel, volume control and basic features for watching programmes. Using Standby When you are not watching TV, you should set your Digital PVR to ‘Standby’. To do this: Press [POWER(√)] to switch to STANDBY. If you plan to leave your Digital PVR unattended for a long period, switch it off and unplug it at the mains supply. (Don’t worry - all of your settings will be
Streszczenie treści zawartej na stronie nr. 14
DSD-9502T 2006.9.13 2:16 PM ˘ ` 13 mac001 1200DPI 90LPI Basic Operation Using the TV Guide (EPG) The TV Guide shows a full list of available channels and programmes. To view the Guide : 1 Press [EPG]. 2 Press […/†] to scroll through the list of channels. 3 To scroll through the programmes press [œ/√]. To scroll forwards and backwards, one day at a time, press the blue and the yellow colour buttons. To preview the highlighted channel, press [INFO]. To add the selected programme to your Timer
Streszczenie treści zawartej na stronie nr. 15
DSD-9502T 2006.9.13 2:16 PM ˘ ` 14 mac001 1200DPI 90LPI PIP and T ime Shifted Recording Picture-in-Picture (PIP) Screen If you press the [PIP] button on the remote control while watching TV, you can watch 2 channels at the same time. The Audio from the Main screen will be outputted. Each time you press the [PIP] button, the PIP screen is switched on or off. PIP screen Normal screen Note: • The PIP screen is not available while recording two channels simultaneously. • The subtitle is not ava
Streszczenie treści zawartej na stronie nr. 16
DSD-9502T 2006.9.14 10:31 AM ˘ ` 15 mac001 1200DPI 90LPI PIP and Time Shifted Recording 1. Time shift information First enter time shift mode by pressing [TIME SHIFT] button this will pause live TV and press [PLAY] button to continue watching TV or if you press the [INFO] button in TSR mode, the time shift information will be displayed. The time shift information displays the current operation status and the time difference between the broadcasting point and watching point. 2. Pause If you
Streszczenie treści zawartej na stronie nr. 17
DSD-9502T 2006.9.13 2:16 PM ˘ ` 16 mac001 1200DPI 90LPI Recording and Playback Using the built-in hard disk drive, you can record a programme without an external media device such as a VCR. Instant Recording Press the [REC] button on the remote control to record the current programme instantly. If you change channels while recording and press the [REC] button, recording starts. You can record up to two channels simultaneously. While recording two channels simultaneously, only programmes wh
Streszczenie treści zawartej na stronie nr. 18
DSD-9502T 2006.9.13 2:16 PM ˘ ` 17 mac001 1200DPI 90LPI Recording and Playback Timer You can set a programme to record automatically by going to Menu - Recording - Timers. Or easily by pressing the [TIMER] button. You can record up to two channels simultaneously. While recording two channels simultaneously, only programmes being record can be viewed. MENU 1 Programming the PVR to record 1 Press the yellow button to add a new recording schedule. Recording 2 Change the Channel and Date using
Streszczenie treści zawartej na stronie nr. 19
DSD-9502T 2006.9.13 2:16 PM ˘ ` 18 mac001 1200DPI 90LPI Recording and Playback Programme Playback You can view the recorded programmes in the Menu - Recording - Recording library. You also can easily view the recorded programme list by pressing the [LIBRARY] button. 1 Select the desired programme to playback using the […/†] button and then press the [PLAY] button to playback the programme. 2 Press the [STOP] button to stop the current programme and go to the current live programme. The eye
Streszczenie treści zawartej na stronie nr. 20
DSD-9502T 2006.9.13 2:16 PM ˘ ` 19 mac001 1200DPI 90LPI Using the Main & Setup Menu’s The Main menu lets you choose and change a wide range of your Digital PVR’s features. • To access the Main Menu, press [MENU]. Recording Recordings library Programme guide Timers Setup Guide search Installation Recording configuration Recording Programme guide enters into EPG Setup screen. Installation Recording Channel list Programme guide Favourites Setup Configuration Installation Language Recording Aut