Instrukcja obsługi Planet Technology DVR-1671

Streszczenie treści zawartej na stronie nr. 1

4/16-ch H.264 Digital Video Recorder
DVR-471 / DVR-1671
Version: 1.0
Quick Installation Guide

Streszczenie treści zawartej na stronie nr. 2

Table of Contents 1. Overview ................................................................................................ 3 2. Package Contents ........................................................................................ 4 3. Rear Panel Description ................................................................................. 5 4. HDD Installation .......................................................................................... 6 5. Hardware Installation ...........

Streszczenie treści zawartej na stronie nr. 3

1. Overview This quick installation guide describes the objectives, organization and basic installation of the PLANET DVR-471 / DVR-1671 surveillance system, and offers standalone system to build a distributed surveillance system, which can be monitored via network, and equipped with hard disc drive that records the video directly. Also, this guide shows you how to find additional information on related products and services. 

Streszczenie treści zawartej na stronie nr. 4

2. Package Contents ó 1 x DVR-471 / DVR-1671 ó 1 x Power adapter ó 1 x Power cord ó 1 x Quick installation guide ó 1 x User’s manual CD ó 2 x SATA cable ó 1 x SATA power cable ó 4 x HDD rack ó 8 x HDD screw ó 1 x Remote controller ó 2 x Battery If any of above items are missed or damaged, please contact your local dealer for support. Note 

Streszczenie treści zawartej na stronie nr. 5

3. Rear Panel Description Item Description 1 VIDEO IN BNC input ports for cameras 2 SPOT BNC output port for spot monitor 3 VIDEO OUT BNC output port for the main monitor 4 AUDIO IN RCA input port for an audio signal 5 AUDIO OUT RCA output port for an audio signal 6 VGA Output port for the VGA monitor 7 PS/2 PS/2 mouse connection port 8 ETHERNET Port for 10/100Mbps Ethernet Input terminal blocks for alarm signals/ 9 SENSOR / RS-485 / RELAY OUT Terminal blocks of RS-485 / Relay output terminal b

Streszczenie treści zawartej na stronie nr. 6

4. HDD Installation Step 1: Lock HDD holder symmetrically in the two sides of HDD with racks and screws. Make sure the position between HDD and racks. The HDD must be installed before the DVR is turned on. Note Step 2: Insert the SATA cable and power cable into SATA HDD. 

Streszczenie treści zawartej na stronie nr. 7

Step 3: Lock the HDD onto DVR machine. Step 4: Insert the SATA cables into the sockets on the main board. Make sure the HDD1, 2 cables insert into HDD1, 2 sockets. Now, the installation was finished 

Streszczenie treści zawartej na stronie nr. 8

5. Hardware Installation 1. Connect your cameras to the Video Inputs. 2. Connect your main monitor to “Video Output” or “VGA” connector. 3. Connect the “Ethernet” port to your switch / hub via RJ-45 cable. 4. Connect the bundled power adapter (DC 12V) to the “Power In” 5. Switch the “Power Switch” to turn on your DVR. Further configuration and information can be found in the user’s manual CD. Please check the user’s manual for more understanding.