Instrukcja obsługi Philips MCD716/93

Streszczenie treści zawartej na stronie nr. 1

2
User Manual
1
Quick Start Guide
MCD716
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote control with two
Composite Video Cable
Control Cable
AAA batteries
(yellow)
FM antenna
Quick start guide User manual
MCD716 QUG_93_Eng 1 2010.3.31, 10:56

Streszczenie treści zawartej na stronie nr. 2

1 Connect the speaker cables. 2 Connect the FM antenna. Tips – See the User Manual for other TV 3 connection options. Connect the control cable. –For connecting to a Progressive Scan TV, refer to the user manual for proper 4 connections and detailed setup. Connect the composite video cable to a TV. 5 Connect the power cords of the system and TV. AC power 5 FM antenna 4 2 Speaker Speaker (left) (right) 3 1 Setting up the TV 1 Press SOURCE (DISC on the remote) to select disc source. 2 Turn on the

Streszczenie treści zawartej na stronie nr. 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOL +/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signa

Streszczenie treści zawartej na stronie nr. 4

Playing a disc 1 Press OPEN •CLOSEç (ç on the remote control) to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. OPEN•CLOSE 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press PRESET-/9 (9 on the remote). Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROGRAM on the remote for more than two seconds to progra