Streszczenie treści zawartej na stronie nr. 1
UG.book Page i Thursday, January 9, 2003 10:05 AM
Streszczenie treści zawartej na stronie nr. 2
UG.book Page ii Thursday, January 9, 2003 10:05 AM Unpack Your DVD player • DVP1100 player (1) • Remote control (1) • 1.5V AAA alkaline batteries (2) • Audio/Video cable (1) • User’s guide (1) • Warranty registration card (1) Insert Batteries 1 Remove battery cover. 2 Insert two 1.5V AAA batteries, paying attention to the correct polarities (+/-). 3 Replace cover. Copyright/Trademarks © 2003. SONICblue Incorporated. All rights reserved. Go-Video is a registered trademark of SONICblue Cor
Streszczenie treści zawartej na stronie nr. 3
UG.book Page i Thursday, January 9, 2003 10:05 AM Table of Contents Video Setup ..............................................12 1 - Getting Started • TV Aspect......................................................12 Welcome.......................................................1 • Video Output .................................................12 • Features............................................................1 Audio Setup ..............................................13 • Compatible Dis
Streszczenie treści zawartej na stronie nr. 4
UG.book Page ii Thursday, January 9, 2003 10:05 AM • Angle .............................................................22 6 - Help • Subtitle...........................................................22 Customer Service Information......27 • Audio .............................................................22 Troubleshooting.....................................27 • Enhance .........................................................22 Technical Specifications....................29 • Memory ...
Streszczenie treści zawartej na stronie nr. 5
UG.book Page 1 Thursday, January 9, 2003 10:05 AM Chapter 1 Getting Started :: Welcome Congratulations on your purchase of the DVP1100 DVD player! In case warranty service is required, please take a moment to attach your receipt to this manual and write down your Serial Number, located on the back panel of the DVD player: __________________________________. Features • Full compatibility with DVD, CD, VCD/SVCD, MP3 and Kodak Picture CD on CD-R/CD-RW • Dolby Digital and DTS decoding and outpu
Streszczenie treści zawartej na stronie nr. 6
UG.book Page 2 Thursday, January 9, 2003 10:05 AM :: Player Overview 1 10 Remote Control 1POWER When the front panel POWER button is pressed in and the 2 red Power LED is lit, press this button to switch the player between On and Standby modes. If the red power LED is not lit, this button will have no effect. 2ARROW KEYSY/B/A/" Press to navigate in on-screen menus. 3 11 3ENTER Press to confirm menu settings. 12 4 4PAUSE/STEP Press once to pause playback. Press repeated
Streszczenie treści zawartej na stronie nr. 7
UG.book Page 3 Thursday, January 9, 2003 10:05 AM 17 A-B Press to repeat a segment between two points (A and B). 18 TITLE Press to display DVD title menus for discs with multiple titles. If a disc has a single title, this key functions like the MENU key. 19 ANGLE Press to view alternative angles during DVD playback (if available). 20 ZOOM Press to zoom in at various levels of magnification. 21 ENHANCE Press to adjust video settings to enhance picture quality. 22 MEMORY Press to bookma
Streszczenie treści zawartej na stronie nr. 8
UG.book Page 4 Thursday, January 9, 2003 10:05 AM Front Panel Controls 12 3 4 5 6 7 8 9 10 11 12 13 1POWER Press to power the player on and off. When this button is pressed in, the player is connected to the wall outlet and the red LED will light. When this button is released, the player is effectively disconnected from the wall outlet and the red LED will turn off . The remote control POWER button only switches between On and Standby modes. 2Power LED Lights when the POWER butt
Streszczenie treści zawartej na stronie nr. 9
UG.book Page 5 Thursday, January 9, 2003 10:05 AM Front Panel Display 1 23 4 5 6 PBC MP3 D 78 91011 12 1 DVD Indicator Lights if a DVD disc is loaded. 2 Play Status Indicator Rotates during disc playback. 3 PBC Indicator Lights if a VCD disc is loaded with PBC (Playback Control). 4 Track Indicator Shows current track number. 5 Time Indicator Shows current playback time in hours, minutes and seconds. 6 DTS Indicator Lights if DVD with DTS soundtrack is loaded. 7 VCD/SVCD Indicator Ligh
Streszczenie treści zawartej na stronie nr. 10
UG.book Page 6 Thursday, January 9, 2003 10:05 AM Rear Panel 1 2 3 7 CUS LISTED OPTICAL FRONT(L) FRONT(R) SUB W. E216622 VIDEO R L COAXIAL 82LN DIGITAL SUR.(L) SUR.(R) CENTER YPb Pr S-VIDEO AUDIO 5.1 CHANNEL 4 5 6 1 Composite Video Output Connect to the video input on your TV. 2 Stereo Audio Output Connect to the left/right analog audio inputs on your TV, stereo or amplifier. 3 Digital Audio Out (Coaxial) Connect to the coaxial digital audio input on your amplifier. 4 Component Video Outp
Streszczenie treści zawartej na stronie nr. 11
UG.book Page 7 Thursday, January 9, 2003 10:05 AM Chapter 2 Connections :: Connecting the Player Follow these steps to connect the DVD player to your TV and audio system. It is recommended that you turn off power on all com- ponents while you are connecting the player. Step 1 - Connect Video Choose one of three video connection methods: Composite Video 1 1Composite Video Connect the supplied video cable from the Video jack on the back panel of the DVD player to the video input on your TV
Streszczenie treści zawartej na stronie nr. 12
UG.book Page 8 Thursday, January 9, 2003 10:05 AM Step 2 - Connect Audio Choose one of four audio connection methods: Stereo Digital Audio 1 3 1 Stereo Audio Connect to the left/right audio inputs of your TV, Audio (Coaxial) stereo or 2-channel analog amplifier. With this connection, all Analog Out options should be set to 2 channel; please refer to page 13. 2 5.1 Channel Analog Audio Connect to the analog audio inputs of your 5.1 channel amplifier. With this connection, all Analog Out
Streszczenie treści zawartej na stronie nr. 13
UG.book Page 9 Thursday, January 9, 2003 10:05 AM Chapter 3 Setup :: Setup Menu Overview Setup Menu Categories Once the player is connected, you can adjust player preferences and functionality in the DVD Setup menu: 1 For Language settings; see page 10. 2 For Video settings; see page 12. 3 For Audio settings; see page 13. For More Audio settings; see page 16. 4 For Rating settings; see page 17. • For an overview of the entire menu system, please see the inside back cover of this User’s Guid
Streszczenie treści zawartej na stronie nr. 14
UG.book Page 10 Thursday, January 9, 2003 10:05 AM :: Language Setup The Language menu allows you to set your language preferences for on-screen displays (OSD), DVD subtitles, DVD audio soundtracks and DVD disc menus. OSD Menu Language To select your preferred language for the player’s on-screen display and setup menu: 1 From Stop mode, press SETUP. 2 Select Language and press ENTER. 3 Select OSD Menu and press ENTER. 4 Set the OSD Menu Language to English (default), French or Spanish and
Streszczenie treści zawartej na stronie nr. 15
UG.book Page 11 Thursday, January 9, 2003 10:05 AM Audio Language To select your preferred language for DVD audio soundtracks: 1 From Stop mode, press SETUP. 2 Select Language and press ENTER. 3 Select Audio and press ENTER. 4 Set the desired Audio Language to English (default), French or Spanish and press ENTER. 5 Press SETUP to save and exit. • Languages vary from disc to disc. The disc itself may override your selection. Disc Menu Language To select your preferred language for DVD disc m
Streszczenie treści zawartej na stronie nr. 16
UG.book Page 12 Thursday, January 9, 2003 10:05 AM :: Video Setup The Video menu allows you to set your preferred aspect ratio for DVD movies and specify your Video connection method. TV Aspect TV Aspect adjusts the format of the video output to match your television and viewing preference. The aspect ratio of standard television screens is 4:3 (4 units wide to 3 units tall). Widescreen televisions are 16:9. 1 From Stop mode, press SETUP. 2 Select Video and press ENTER. 3 Select TV Aspect a
Streszczenie treści zawartej na stronie nr. 17
UG.book Page 13 Thursday, January 9, 2003 10:05 AM :: Audio Setup The Audio menu allows you to set the analog and digital audio outputs to correspond with the external components you have con- nected to the player. For example, if you connected the player to a TV using the Stereo Audio jacks, you should set Dolby Digital and DTS settings to 2 channel to enjoy downmixed stereo audio. • You can set the audio format for each of the following sources: Dolby Digital, DTS, MP3 and CD/VCD. • DVD
Streszczenie treści zawartej na stronie nr. 18
UG.book Page 14 Thursday, January 9, 2003 10:05 AM DTS Setting Follow these steps to set the analog and digital audio formats of out- going DTS (Digital Theater Sound) soundtracks: 1 From Stop mode, press SETUP. 2 Select Audio and press ENTER. 3 Select DTS and press ENTER. 4 Set Analog Out to: 6 Channel (default) To output DTS 5.1 channel audio from the 5.1 channel analog audio outputs; e.g., to a 5.1 channel amplifier. 2 Channel To output downmixed 2 channel stereo from the stereo audi
Streszczenie treści zawartej na stronie nr. 19
UG.book Page 15 Thursday, January 9, 2003 10:05 AM CD/VCD Setting Follow these steps to set the outgoing analog and digital audio for- mat of CD and VCD tracks: 1 From Stop mode, press SETUP. 2 Select Audio and press ENTER. 3 Select CD/VCD and press ENTER. 4 Set Analog Out to: 2 Channel (default) To output 2 channel stereo audio from the stereo audio outputs; e.g., to a VCR or TV. 6 Channel To enjoy Pro Logic surround sound during CD and VCD playback from the 5.1 channel analog audio o
Streszczenie treści zawartej na stronie nr. 20
UG.book Page 16 Thursday, January 9, 2003 10:05 AM :: More Audio Setup The More Audio menu includes Pro Logic and Subwoofer settings. Pro Logic Setting The DVD player has a built-in Dolby Pro Logic decoder to provide virtual surround sound for PCM (stereo) source material from the 5.1 channel analog audio outputs. 1 From Stop mode, press SETUP. 2 Select More Audio and press ENTER. 3 Select Pro Logic and press ENTER. 4 Select the desired Pro Logic setting and press ENTER: Auto (default) Ste
