Streszczenie treści zawartej na stronie nr. 1
LCD Monitor
Quick Installation Guide
English
Français
Deutsch
Italiano
Español
Русский
1
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS PRECAUTIONS.......................................................................................................... 2 INSTALLATION 2 POWER CONNECTION 2 MAINTENANCE……… 2 TRANSPORTING THE MONITOR 2 GETTING STARTED 3 PACKAGE CONTENTS 3 INSTALLATION OF FIRST USE 4 IDENTIFYING PA RTS AND CONTROLS 4 FUNCTIONS OF THE BUTTONS AND INDICATOR: 4 SETUP 5 CUSTOMIZING YOUR MONITOR 6 Working with OSD Group. 6 Introduction to Hotkeys and the Characteristic Functions………
Streszczenie treści zawartej na stronie nr. 3
Precauciones Installation 1. Do not cover or block the ventilation ports on the rear of the monitor. 2. Do not install the monitor close to heat sources such as radiators or air ducts, or in a location exposed to direct sunlight, excessive dust, mechanical vibration, or shock. Power connection 1. Use the correct power cord for your local voltage. 2. Use an accessible outlet close to the monitor. 3. Do not allow anything to rest on the power cable. 4. Only use the power adapter a
Streszczenie treści zawartej na stronie nr. 4
Getting Started Package contents Before beginning, ensure that the carton contains the following items: 1. LCD Monitor 2. Power cord (The plug may vary according to the electrical standard for your area) 3. Video Signal Cable (Analog, D-SU B Cable) 4. Audio cable (optional) 5. CD-ROM (Contains the driver of the monitor, this user’s manual and other information) 6. Quick Installation Guide 4
Streszczenie treści zawartej na stronie nr. 5
Installation of First Use 1. The installation of the monitor is very simple. Take the monitor from the packing box and remove all the packing materials. And then put the monitor on the desk carefully; fold the monitor base, so that the monitor can stand on the desk properly. Next, adjust the monitor t o the desired position according to the seat and other factors. Identifying parts and controls 1. The LED indicator and control buttons are as follows: 2. The connection ports a
Streszczenie treści zawartej na stronie nr. 6
Setup 1. Connecting video (Note: Before connecting computer, ensure the resolution and refresh rat e of the computer do not exceed the following setting s - resolution: 1280*1024, refresh rate: 75Hz.) 1.1 Turn off your computer 1.2 Connect the video signal cable to the VGA port of your PC, tighten the screws on the connector onto the computer 1.3 Connect the other end of the video signal cable to the VGA-IN port at the back of the monitor, tighten the screws on the connector to the mon
Streszczenie treści zawartej na stronie nr. 7
Customizing your Monitor The On Screen Display (OSD) system provides a full range of customizable tools to optimize your display. Important: While full customization is available, we strongly recommend using the Auto Adjustment function, which is preset to fully optimize your monitor’s performance. Simply press the buttons simultaneously to engage the Auto Adjustment. It is also recommended that you execute the function following any change made to your display from your computer.
Streszczenie treści zawartej na stronie nr. 8
OSD Icon List Icon Functions Detail Auto Adjustment Optimize the picture performance automatically (you may also press _ an d _ buttons simultaneously , while the OSD menu is not shown, to activate the function) Brightness Adjust the luminance level of the screen Contrast Adjust the contrast level (black to white ratio) of the screen Sharpness Adjust the sharpness of the screen Clock Adjust the monitor’s internal sampling clock rate Phase Adjust the monitor internal sign
Streszczenie treści zawartej na stronie nr. 9
OSD Menu Position Adjust the position of OSD menu on the screen. Power Saving Select between Standard and Advanced power Mode saving modes. See addendum for details Standard Fulfill EP A Energy Star power management requirement Advanced Activate monitor Life-Extension function Recall Factory Reset monitor parameters back to factory preset Preset values. Exit Disable the OSD menu 9
Streszczenie treści zawartej na stronie nr. 10
Troubleshooting Symptom Check Items 1. No picture 1. Check if the monitor is turned on (press the button again). 2. LED indicator (at the right side 2. Check if the power cord is properly connected to the monitor of the monitor) is not lit and power outlet. 3. Check if there is electricity coming from the power outlet (use another device to check for power). 1. No picture 1. Check if your computer is turned on. 2. LED indicator (at the right side 2. Ensure the computer is no
Streszczenie treści zawartej na stronie nr. 11
Technical Features and Specifications Item Description LCD Display 17" TFT active matrix panel Display Size 337.92(H ) x 270.336(V) mm Pixel Pitch 0.264(H ) x 0.264(V) mm Maximum SXGA 128 0 x 1024 @75Hz Resolution Recommended SXGA 128 0 x 1024 @60Hz Max. Display Color 16.2M colors Brightness 300 cd/m2 (typ.) Contrast Ratio 500 G1 (typ.) V iewing Angle L/R 160° (typ.) (CR_5) U/D 160° (typ.) Response T ime (T r+Tf) 12 ms (typ.) Signal Input Analog D-sub 15 pin Input Frequen
Streszczenie treści zawartej na stronie nr. 12
Interface Frequency 1. The following frequency range is the working period. If the entered mode is between the below period but does not match the frequency of supported timing, display optimization will not be assured. If the entered mode is out of the working period, the display will be blank (just show “Input Signal Out Of Range”) then go to power saving. 2. Basically , mode judgment is regardless the sync polarity except if both or more modes all belong to the supported timing list and
Streszczenie treści zawartej na stronie nr. 13
Supported timing list 1. If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. 13
Streszczenie treści zawartej na stronie nr. 14
Note: When the input display mode is not 128 0 X 1024, the image is smoothly expanded to1280 X 1 02 4 dots with scaling engine. After expansion from 65 0 X 350, 64 0 X 400, 64 0 X 480, 72 0 X 400, 83 2 X 6 24, 80 0 X 600, and 1024 X 7 68 resolution, the text may look no t so sharp, and the Graphics may not look proportional. 14
Streszczenie treści zawartej na stronie nr. 15
Addendum Advanced Power Saving M ode 1. Background The traditional monitors have the function of electricity-saving dormancy. Bu t the interval of dormancy is difficult to decide. If the interval is long, the purpose of saving electricity can not be achieved. While if the interval is short, y our computer and LCD monitor will be dormant often. When the LC D monitor becomes dormant, the back lights w ill be turned off immediately. The frequent turning-on and turning-off of lights will
Streszczenie treści zawartej na stronie nr. 16
5.l How can you engage the Monitor Life-Extension function? You may simply use the OSD control to activate the Monitor Life-Extension function. 1. Press the Menu button to activate the OSD menu 2. Press or button to select the Power Saving Mode icon. 3. Press the Menu button to confirm the selection 4. Pres or button to select the “Advanced” option in the Power Savin g Mode function. 5. Press the Menu button to confirm the selection 6. Press
Streszczenie treści zawartej na stronie nr. 17
Regulations FCC compliance 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provid
Streszczenie treści zawartej na stronie nr. 18
TCO’99 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you wit h a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labeled computers? In many countries, environmental labeling has become an established method for encouraging the
Streszczenie treści zawartej na stronie nr. 19
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or ch
