Instrukcja obsługi SECO-LARM USA SK-2323-SPQ

Streszczenie treści zawartej na stronie nr. 1

Outdoor Stand-Alone
Weatherproof Keypads
Quick User Programming Guide


(SK-2323-SDQ shown) (SK-1323-SPQ shown)
Model 2 Relay Backlit Proximity
Number Outputs Keys Reader

Mullion-Style Keypads
SK-2323-SDQ  
SK-2323-SPQ   

Sealed-Environment Keypads
 
SK-1323-SDQ
  
SK-1323-SPQ

For complete programming instructions, please see page 10 of the User Manual.




N OTE: Products with a model number that ends with “Q” or have a round green “Q” sticker

Streszczenie treści zawartej na stronie nr. 2

ENFORCER Outdoor Stand-Alone Keypads Quick Programming Guide Programming Tips Program new Master Code immediately. Program the Output #1 access mode immediately, or the keypad will only accept user cards. Take note of the keypad status LEDs— o Right LED Green: Standby o Left LED Solid Red/Right LED Solid Orange: Programming Mode o Right LED Flashing Orange: Awaiting code/card entry If unsure of which mode the keypad is in, press until the right LED is gre

Streszczenie treści zawartej na stronie nr. 3

ENFORCER Outdoor Stand-Alone Keypad Quick Programming Guide Programming Output #1 Each Output #1 user can be programmed to have a user code and a user card.* 1.1 User Code Only 1. Enter Programming Mode by entering the Master Code twice. ( 0 0 0 to 9 9 9 ) 2. Enter a user ID number. 3. If the left LED is red, previous user data exists. Clear it by entering . The keypad will beep in confir

Streszczenie treści zawartej na stronie nr. 4

ENFORCER Outdoor Stand-Alone Keypads Quick Programming Guide Programming Output #2 Each Output #2 user may only have a user code OR a user card programmed. 2.1 Programming an Output #2 User Code 1. Enter Programming Mode by entering the Master Code twice. 4 2. Enter . ( 0 0 to 0 9 ) 3. Enter a user ID number. 4. If the left LED is red, previous user data exists. Clear it by entering . The keypad will beep in confirmation and