Streszczenie treści zawartej na stronie nr. 1
OPERATING GUIDE for your
GEM-DXRP3 KEYPAD
© NAPCO 2006 OI324 11/06
1
Streszczenie treści zawartej na stronie nr. 2
INTRODUCTION The GEM-DXRP3 is a “smart”, interactive, You'll probably find subjects mentioned in highest industry standards. To assure menu-driven keypad designed for your this booklet that do not apply to your optimum safety and security, familiarize Napco control panel. A digital display is system. Napco control panels have such a yourself with this equipment. Periodically provided to show the status of your system. wide variety of features that few security check its condition and sta
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS TO SILENCE AN ALARM, ENTER YOUR TABLE OF CONTENTS Section Page CODE, AND PRESS J. FOR SERVICE, CALL: __________________ KEYPAD CONTROLS & INDICATORS ............................................... 4 CENTRAL STATION: __________________ SETTING THE ALARM (ARMING) WHEN LEAVING .......................... 6 EXIT DELAY: _________________________ PROTECTING YOURSELF WHILE ON THE P
Streszczenie treści zawartej na stronie nr. 4
KEYPAD CONTROLS & INDICATORS 1 2 13 3 96 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 7 4 8 5 9 6 10 11 12 4
Streszczenie treści zawartej na stronie nr. 5
KEYPAD CONTROLS & INDICATORS 5 BYPASS Button. (1) Deactivates INSTANT Button. (1) Cancels 10 1 Window. Lights indicate system selected zones from the system. entry delay on Exit/Entry Zones, status messages; digit display (2) Unbypasses a bypassed zone. causing an instant alarm upon indicates related zone, function or (GEM-P3200/9600 panels only). violation. (2) Scrolls window error message numbers. display backward (PRIOR). (3) 6 RESET Button. (1) Resets 2 Answers “NO” to questio
Streszczenie treści zawartej na stronie nr. 6
SETTING THE ALARM (ARMING) WHEN LEAVING Arming the System 1. Check the keypad. The green STATUS light must be on in order to arm. 12 BYPASS FIRE/TBL SYS TBL CHIME INTERIOR If the green light is off, the number(s) of any unsecured zone(s) will display in the window. Refer to the pull-up zone list for the location of each problem zone and secure by closing windows, doors, etc. When all zones are secure, the green STATUS light will come on. 2. Arm the system. Enter your User
Streszczenie treści zawartej na stronie nr. 7
SETTING THE ALARM (ARMING) WHEN LEAVING System Trouble If you attempt to arm with the SYS TBL light on, a 3-second tone will sound and a “P” will display in the window. This indicates that the system has detected P a problem which may prevent it from operating properly. A number corresponding to the INTERIOR BYPASS FIRE/TBL SYS TBL CHIME trouble will then appear in the display. Refer to SYSTEM TROUBLE ERROR CODES for descriptions of these troubles. If you cannot correct the proble
Streszczenie treści zawartej na stronie nr. 8
PROTECTING YOURSELF WHILE ON THE PREMISES Bypassing Interior Zones Interior Zones, when bypassed, allow free movement within the home while the INTERIOR BYPASS FIRE/TBL SYS TBL CHIME protection of armed perimeter zones is maintained. To bypass Interior Zones, press E and enter your User Code followed by D. The red ARMED light will light and the green STATUS light will blink, indicating zones bypassed. The INTERIOR and BYPASS lights will display in the window. Your system m
Streszczenie treści zawartej na stronie nr. 9
PROTECTING YOURSELF WHILE ON THE PREMISES Easy Exit (Optional - Easy Exit programmed? YES NO) Your system may have been programmed for Easy Exit, which allows a user to exit the premises while the system is armed. By activating Easy Exit while the system is armed, the Exit Delay countdown will take place, during which time you are permitted to leave through the exit door. The Easy Exit Delay time will be identical to the Exit Delay time the system gives you each time it is
Streszczenie treści zawartej na stronie nr. 10
TURNING OFF THE ALARM (DISARMING) WHEN RETURNING Disarming the System 1. Enter your premises through the Entry/Exit door. The keypad will sound a steady tone to remind you to disarm the system before your Entry Delay time expires. 2. Enter your User Code and press D. The red ARMED light will go out, indicating that the system has been disarmed. • If you enter an invalid code, the keypad will beep 4 times, signifying an error. Re-enter your code immediately. 10 seconds before Entry
Streszczenie treści zawartej na stronie nr. 11
FIRE PROTECTION (Applicable only where local ordinance permits use of this alarm control panel for fire protection). Fire-Zone Alarm If a fire is detected, the FIRE/TBL light will display with the zone number and the NN INTERIOR BYPASS FIRE/TBL SYS TBL CHIME keypad sounder will pulse. • If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire Department from an outside phone. • If there is no evidence of a fire, enter your code and press J to silence
Streszczenie treści zawartej na stronie nr. 12
FIRE PROTECTION 2. One person sounds the alarm. alternate route through the window. Preparing a Fire Escape Plan If the door is cool, brace your 3. Each person tests his door. Even with the most advanced fire shoulder against it and open it alarm system, adequate protection 4. Pretend the door is hot and use the cautiously. Be ready to slam the requires an escape plan. alternate escape exit. door if smoke or heat rushes in. To prepare your plan, draw floor 5. Everyone meets outdoor
Streszczenie treści zawartej na stronie nr. 13
FIRE PROTECTION Floorplan Draw a plan of your premises in the space provided below. Floorplan 13
Streszczenie treści zawartej na stronie nr. 14
FIRE PROTECTION LIMITATIONS OF FIRE ALARM WARNING SYSTEM provide early-enough warning for a variety of alarm is obscured by noise from a stereo, radio, Although a fire alarm system may be of a reasons: (a) they may not sense fires that start air conditioner, or other appliance, or by reliable and state-of- the-art design, neither it where smoke cannot reach them, such as in passing traffic, etc. Alarm warning devices, nor its peripheral detection devices can offer chimneys, walls, roofs,
Streszczenie treści zawartej na stronie nr. 15
KEYPAD FUNCTIONS The keypad can provide access to a wide assortment of utility functions. The functions are displayed in a prompting “YES/NO” format. 1. To enter the Function Menu, press A. • In all UL-listed or high-security installations, a valid User Code must first be entered followed by A. 2. To skip a function, answer NO (F) or A. 3. To select and execute a function, answer YES (E) or J. • Functions may be manually scrolled forward or backward using A and B, respectively. • To
Streszczenie treści zawartej na stronie nr. 16
KEYPAD FUNCTIONS 4. Display System Troubles? Displays a 1- or 2-digit error code representing a problem detected in the system. (See SYSTEM TROUBLE ERROR CODES for a 04 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME description of these codes). Use NEXT(E) and PRIOR (F) to scroll system troubles. (For GEM-P9600/3200 panels only). 5. Display Fire Alarms? Displays alarms that have occurred on the Fire Zone(s). Press the NEXT and PRIOR Buttons to scroll zones. 05 INTERIOR BYPAS
Streszczenie treści zawartej na stronie nr. 17
KEYPAD FUNCTIONS 9. Reset System Trouble? System troubles display and sound at the keypad. Correcting the trouble will clear most indications, however the following error codes will 09 BYPASS FIRE/TBL SYS TBL CHIME INTERIOR require manual reset: E11; E13; E19; E20 and E22. (See SYSTEM TROUBLE ERROR CODES for a description of error codes). 10. Reset Sensor Watch Failure (Sensor Watch programmed? YES NO). Your system may have been programmed for Sensor Watch, a fea
Streszczenie treści zawartej na stronie nr. 18
KEYPAD FUNCTIONS 15. Activate Telephone Test? (Telephone Test programmed? YES NO). Sends a communicator test to the central station. A communication failure will be 15 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME indicated at the keypad by a system trouble “E03-00” display. Repeat the test to attempt to correct a communication failure, as any successful communication will clear this display. 16. Delay Arming 1-4 hours. (Not for UL-listed systems). Your system may be set 16 to
Streszczenie treści zawartej na stronie nr. 19
KEYPAD FUNCTIONS 17. Activate Program? Activates the Program Mode from Keypad No. 1. Note: This feature is disabled while armed. (See PROGRAMMING USER CODES). 17 INTERIOR BYPASS FIRE/TBL SYS TBL CHIME 18. Activate Download? For installer's use only. If accidentally enabled, press C to exit. 18 BYPASS FIRE/TBL SYS TBL CHIME INTERIOR Note: This feature is disabled while armed. 19. Relay Control? (Relay Control p
Streszczenie treści zawartej na stronie nr. 20
CENTRAL STATION MONITORING Your alarm specialist may have restored first, then the panel armed and identified. If your system reports on arming programmed your system to be monitored disarmed, all within the delay period. (Closing Report), the central station will by a central station. The built-in digital acknowledge arming. This will signal at the Opening and/or Closing Reporting. communicator can transmit emergency keypad as a “ringback” beep. Note: If the Your system can notify
