Streszczenie treści zawartej na stronie nr. 1
LevelOne
WBR-3460
11g Wireless ADSL2/2+ Modem Router
1WAN 4LAN, QoS, VPN
User Manual
V1.0.0-0608
Streszczenie treści zawartej na stronie nr. 2
Wireless ADSL2/2+ Modem Router User Guide Table of Contents CHAPTER 1 INTRODUCTION...................................................................................... 4 Wireless ADSL2/2+ Modem Router Features .................................................... 4 Package Contents ................................................................................................ 7 Physical Details ..............................................................................................
Streszczenie treści zawartej na stronie nr. 3
Introduction Qos..................................................................................................................... 101 Remote Administration.................................................................................... 103 Routing .............................................................................................................. 105 Upgrade Firmware............................................................................................ 109 CHAPTER 8 M
Streszczenie treści zawartej na stronie nr. 4
Wireless ADSL2/2+ Modem Router User Guide Chapter 1 Introduction This Chapter provides an overview of the Wireless ADSL2/2+ Router's features and capabilities. Congratulations on the purchase of your new Wireless ADSL2/2+ Modem Router. The Wireless ADSL2/2+ Modem Router is a multi-function device providing the following services: • ADSL2/2+ Modem. • Shared Broadband Internet Access for all LAN users. • Wireless Access Point for 802.11b and 802.11g Wireless Stations. • VPN Gateway to a
Streszczenie treści zawartej na stronie nr. 5
Introduction • Fixed or Dynamic IP Address. On the Internet (ADSL port) connection, the Wireless ADSL2/2+ Modem Router supports both Dynamic IP Address (IP Ad- dress is allocated on connection) and Fixed IP Address. Advanced Internet Functions • Application Level Gateways (ALGs). Applications which use non-standard connections or port numbers are normally blocked by the Firewall. The ability to define and allow such applications is provided, to enable such applications to be used normal
Streszczenie treści zawartej na stronie nr. 6
Wireless ADSL2/2+ Modem Router User Guide • WPA-PSK support. Like WEP, WPA-PSK encrypts any data before transmis- sion, providing protection against snoopers. The WPA-PSK is a later standard than WEP, and provides both easier configuration and greater security than WEP. • Wireless MAC Access Control. The Wireless Access Control feature can check the MAC address (hardware address) of Wireless stations to ensure that only trusted Wireless Stations can access your LAN. Simple Configuration.
Streszczenie treści zawartej na stronie nr. 7
Introduction Package Contents The following items should be included. If any of these items are damaged or missing, please contact your dealer immediately. • WBR-3460A/B • Power Adapter • Cat-5 Ethernet (LAN) cable (Yellow Color) • RJ-11 (ADSL) cable (Gray Color) • RJ-11 to RJ45 cable (WBR-3460B Only/Gray Color) • Quick Installation Guide • CD Manual 7
Streszczenie treści zawartej na stronie nr. 8
Wireless ADSL2/2+ Modem Router User Guide Physical Details Front-mounted LEDs Figure 2: Front Panel Power LED On - Power on. (Green) Off - No power. Status LED Off - Normal operation. (Yellow) Blinking - This LED blinks during start up, and during a Firmware Upgrade. For each port, there are 2 LEDs, to indicate the connection speed LAN (10BaseT or 100BaseT) of each port. • 100BT - This will be ON if the LAN connection is using 100BaseT, and Blinking if data is being transfer
Streszczenie treści zawartej na stronie nr. 9
Introduction Rear Panel Figure 3: Rear Panel ADSL port Connect this port to your ADSL line. 10/100BaseT Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports. LAN connec- tions Note: Any LAN port on the Wireless ADSL2/2+ Modem Router will automatically function as an "Uplink" port when required. Just connect any port to a normal port on the other hub, using a standard LAN cable. Reset Button This button will reset the Wireless ADSL2/2+ Modem Router to the f
Streszczenie treści zawartej na stronie nr. 10
Chapter 2 Installation 2 This Chapter covers the physical installation of the Wireless ADSL2/2+ Modem Router. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. • For Internet Access, an Internet Access account with an ISP, and a DSL connec- tion. • To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE 802.11g or IEEE 802.11b specifications. Procedure Fi
Streszczenie treści zawartej na stronie nr. 11
Installation ADSL2/2+ Modem Router and the PCs. Also, if using multiple Access Points, adjacent Access Points should assign different Channels. 2. Connect LAN Cables Use standard LAN cables to connect PCs to the Switching Hub ports on the Wire- less ADSL2/2+ Modem Router. Both 10BaseT and 100BaseT connections can be used simultaneously. If required, connect any port to a normal port on another Hub, using a standard LAN cable. Any LAN port on the Wireless ADSL2/2+ Modem Router will automa
Streszczenie treści zawartej na stronie nr. 12
Chapter 3 Setup 3 This Chapter provides Setup details of the Wireless ADSL2/2+ Modem Router. Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration • Wireless setup • Assigning a Password to protect the configuration data. PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Configuration. Other configuration may also be required, depending on which features and functions of the Wireless ADSL2/2+ Modem Router
Streszczenie treści zawartej na stronie nr. 13
Setup Use any of the following Administration Configuration Chapter 7 settings or features: Advanced Administration • PC Database • Config File • Logging • E-mail • Diagnostics • Remote Admin • Routing • Upgrade Firmware 13
Streszczenie treści zawartej na stronie nr. 14
Wireless ADSL2/2+ Modem Router User Guide Configuration Program The Wireless ADSL2/2+ Modem Router contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers: • Netscape 7.1 or later. • Mozilla 1.6 or later • Internet Explorer V5.5 or later Preparation Before attempting to configure the Wireless ADSL2/2+ Modem Router, please ensure that:
Streszczenie treści zawartej na stronie nr. 15
Setup If you can't connect If the Wireless ADSL2/2+ Modem Router does not respond, check the following: • The Wireless ADSL2/2+ Modem Router is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command: • Open the MS-DOS window or command prompt window. • Enter the command: ping 192.168.0.1 If no response is received, either the connection is not working, or your PC's IP address is not compatible with the Wireless ADSL2/
Streszczenie treści zawartej na stronie nr. 16
Wireless ADSL2/2+ Modem Router User Guide Figure 5: Setup Wizard Home Page 3. On the VC1 screen, shown below, enter the VPI and VCI values provided by your ISP, then click "Next". Figure 6: Setup Wizard - VC1 16
Streszczenie treści zawartej na stronie nr. 17
Setup Figure 7: Setup Wizard - Internet Access 4. On the Internet Access Screen, shown above, select the correct connection type, as used by your ISP. Click "Next" and complete the configuration for your connec- tion method. • You need the data supplied by your ISP. Your ISP's data will also have the DSL Multiplexing Method ( LLC or VC ) • The common connection types are explained in the following table.. Connection Type Details ISP Data required Dynamic Your IP Address is allocated
Streszczenie treści zawartej na stronie nr. 18
Wireless ADSL2/2+ Modem Router User Guide 6. On the final screen of the Wizard, run the test and check that an Internet connec- tion can be established. 7. If the connection test fails: • Check all connections, and the front panel LEDs. • Check that you have entered all data correctly. Configuring VC2, VC3 and VC4 The Wireless ADSL2/2+ Modem Router supports multiple VCs (Virtual Circuits) on the ADSL connection. VC1 must be used for general-purpose Internet access. The other VCs (VC2,
Streszczenie treści zawartej na stronie nr. 19
Setup Setup Wizard VC Screen The VC number is displayed (VC2, VC3, or VC4) VC Enable To use this VC, you must enable it by checking this checkbox. VPI Enter the VPI value provided by your ISP. VCI Enter the VPI value provided by your ISP. Multiplexing Select the multiplexing value provided by your ISP. ATM Service Select the multiplexing value provided by your ISP. IP Address Enter the IP address of the device on your LAN which will re- ceive the data on this VC. • For Video-on-Dema
Streszczenie treści zawartej na stronie nr. 20
Wireless ADSL2/2+ Modem Router User Guide Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. Figure 9: Home Screen Main Menu The main menu, on the left, contains links to the most-commonly used screen. To see the links to the other available screens, click "Advanced" The main menu also contains two (2) buttons: • Log Out - When finished, you should click t
