Instrukcja obsługi Rolls RM83T

Streszczenie treści zawartej na stronie nr. 1

OPERATION
CONFIGURING THE 1/4” INPUT JACKS AS DIRECT OUTPUTS
The eight 1/4” Input jacks come from the factory confi gured as line inputs and
are electrically mixed with the XLR jacks. They may be used together if desired.
To confi gure a channel’s 1/4” jack as a Direct Out, fi rst remove the RM83T lid.
For each channel there are dual three-pin headers with shorting jumper on two
pins. The setting from the factory is on “IN”. By moving the shorting jumpers to
RM83T
the confi guration show

Streszczenie treści zawartej na stronie nr. 2

INTRODUCTION CONNECTION Thank your for your purchase of the Rolls RM83T Mic Line eight channel audio mixer. It 1. MICROPHONE AND MAIN OUTPUT CONNECTION is intended for sound reinforcement or studio applications where several microphones or Connect microphones to the XLR Inputs as shown here. If the line sources need to be combined to a single output. Please review this manual for proper microphones are condenser type, and require phantom power operation. - remember to switch on (down) the c