Streszczenie treści zawartej na stronie nr. 1
VideoEdge IP Box Camera
Installation & Operation Guide
Version1.5
Part Number: 8200-2646-00 B0
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
Copyright Under copyright laws, the contents of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of Tyco International Ltd. © Copyright 2009 and its Respective Companies. All Rights Reserved, American Dynamics 6600 Congress Avenue Boca Raton, FL 33487, U.S.A.
Streszczenie treści zawartej na stronie nr. 4
Table Of Contents SAFETY PRECAUTIONS .............................................................................6 1. PRODUCT FEATURES.............................................................................7 1.1 PRODUCT INSTRUCTIONS.....................................................................7 1.2 PRODUCT FEATURES ...........................................................................8 1.3 TECHNICAL SPECIFICATIONS ..........................................................
Streszczenie treści zawartej na stronie nr. 5
Installation and Operation Guide 4.5 TCP/IP CONFIGURATION SETTING ......................................................25 4.6 CONNECTION TESTING.......................................................................27 5. Operation Instructions for the Network...............................................29 5.1 MICROSOFT INTERNET EXPLORER......................................................30 5.1.1 Connecting the IP camera .................................................................
Streszczenie treści zawartej na stronie nr. 6
SAFETY PRECAUTIONS All the following safety and operational instructions to prevent harm or injury to the operator(s) or other persons should be read carefully before the unit is activated. WARNING To prevent fire or shock hazard, avoid exposing this unit to rain or moisture. Do not block ventilation openings. Do not place anything on top of the unit that might spill or fall into it. Do not attempt to service this unit yourself, as opening or removing covers may expose
Streszczenie treści zawartej na stronie nr. 7
Installation and Operation Guide 1. PRODUCT FEATURES 1.1 Product Instructions The VideoEdge IP Box Camera ADCIPEB is a user-friendly device which combines cutting-edge sophistication with practical reliability and convenience, high performance with smooth remote communication. Just plug in the network cable and you’ll get live streaming video and audio anytime, any place. You’ll have security you can rely on! The especially high resolution has 520 TV lines, a built-in web server and a N
Streszczenie treści zawartej na stronie nr. 8
1.2 Product Features • 1/3" SONY Super HAD CCD. • Mechanical IR Cut Filter. • MPEG4 / MJPEG video compression. • High resolution: 520 TV • Embedded web server. • Supports a built-in microphone. • Supports motion detection. • Supports the SD card for alarms & scheduled recording. • Supports USB interface for basic network setup. • Supports day & night function. 1.3 Technical Specifications General: ‧Built-in Web Server and network interface. You don’t need a PC to operate.
Streszczenie treści zawartej na stronie nr. 9
Installation and Operation Guide ‧Image frame rate: up to 30 (25) frames/second. ‧Supports two compression modes, the Motion - JPEG and the MPEG4. ‧5 levels of compression provided. The file size of an M-JPEG compressed image depends on the image’s actual content. Images with a lot of detail will generate bigger files. The level of compression determines the image quality. High compression requires smaller files while low compression gives you finer image quality along with bigger files.
Streszczenie treści zawartej na stronie nr. 10
Dimensions and weight are as follows. ‧Height: 55 (mm) Dimensions / ‧Width: 95 (mm) Weight ‧Length: 62 (mm) ‧Weight: 306 g (Not including power supply and mini-tripod.) ‧CD-R x 1 Accessories ‧Power supply: 12V DC/2A. Included: ‧Instruction manual. 10 Installation and Operation Guide
Streszczenie treści zawartej na stronie nr. 11
Installation and Operation Guide 2. DESCRIPTION OF THE FRONT/REAR VIEW 2.1 Front Panel and Rear Panel -- Front Panel -- -- Rear Panel -- 2 3 4 5 8 1 6 7 1 MICROPHONE: The IP camera has an additional audio function. The device has a microphone built into its front panel which records sound. 2 Plug Inlet: An AC 24V or a DC 12V inlet that connects to an external power supply. NOTE: This device’s requires AC 24 voltage, which is within the range of the SELV (Separated or safety extra-lo
Streszczenie treści zawartej na stronie nr. 12
2.2 Flank Panel -- Left Flank Panel -- -- Right Flank Panel -- 12 3 4 5 6 7 1. Lens Mount: This IP camera is used with either a C or a CS mount lens. 2. DIP Switch: 1. AES: Auto electric shutter. 2. DC IRIS: Use an auto iris (DC drive) 3. DHCP: Turn On / Turn Off to use the DHCP protocol. If the switch points upwards, the device can change the setup of network function (enable/disable) via the network. 4. STATIC IP: If the switch points down, the device can’t obtain an IP address f
Streszczenie treści zawartej na stronie nr. 13
Installation and Operation Guide Alarm wiring diagram: 4. RESET: Recover to factory default. 5. 5pin MINI USB Port: The user can use a USB device cable to connect the IP camera to the USB port on the PC. 6. ALC VR: Iris control VR. When an auto iris (DC Drive) lens is used, this VR is used to adjust the iris for different lighting environments. Adjust the VR clock-wise to open the iris and counter-clockwise to close the iris of the camera. 7. IRIS: Auto iris connector. This camera
Streszczenie treści zawartej na stronie nr. 14
2.3 The USB function By connecting the IP camera with a PC via the USB connector, the IP camera can provide two different functions. 1. Insert an SD card: As a card reader. Insert an SD card into the IP camera, then connect to the PC. You might transfer files between the SD card and the PC. Once you've connected your IP camera to your computer, the Windows system will detect the connection and ask you what you want to do with your SD card. In other words, if the user connects the IP c
Streszczenie treści zawartej na stronie nr. 15
Installation and Operation Guide 2.4 Bracket mount installation The underside of the camera has a screw hole for attaching the bracket to the camera. Please follow the steps below to install the camera on the bracket. Step 1: Rotate the screw in the bracket to fix the bracket to the camera. Step 2: Fix the bracket to the ceiling. Step 3: Rotate & fix the camera angle fixer at the selected angle. 15
Streszczenie treści zawartej na stronie nr. 16
3. INSTALLATION Please follow the instructions and the diagram below to set up the system. NOTE: The IP camera is linked by its Video Out connection via a BNC connector to a monitor's Video In connection. If this connection is there, you can see some information on the monitor screen, such as the IP camera factory default Static IP address(192.168.1.168). But the IP camera Static IP address can only appear if there is a connection between the IP camera and another device. If there is n
Streszczenie treści zawartej na stronie nr. 17
Installation and Operation Guide 3.3 CONNECTING WITH A MULTIPLEXER LAN CAMERA 1 LAN CAMERA 2 TO LAN CAMERA VIDEO OUT BNC CONNECTOR LAN CAMERA 16 3.4 UPDATING SYSTEM SOFTWARE If the system software of the IP camera needs to be upgraded, please take the following steps to safely process it. NOTE: Before carrying out the following procedures, please ensure the SD card is working and the file of the system firmware is intact 1. Format an SD card using the FAT format. 2. Create
Streszczenie treści zawartej na stronie nr. 18
If the message "UPDATE NG RESET PLEASE" appears rather than "UPDATE OK RESET PLEASE", please write down the error messages shown on the screen and inform your technical support, while ignoring the following steps. 7. Power off the IP camera when this update process is finished, then remove the SD card from the IP camera. 8. Reconnect the Ethernet cable to the RJ-45 port as necessary. 9. Power ON the IP camera and it will work normally if the entire update procedure goes correctly. 10. V
Streszczenie treści zawartej na stronie nr. 19
Installation and Operation Guide 3.5 IP camera SD card Troubleshooting 1. Check if the SD card position is correct or not. Please refer to the manual for the related information. 2. Correctly insert the SD card after powering the IP camera on. The "SD" icon displays in the upper-right corner of the monitor screen. If not, it means the device detection has failed. Please contact your technical support and ignore the following steps. 3. If a check mark appears, please check the followin
Streszczenie treści zawartej na stronie nr. 20
4. Network Configuration 4.1 Cable Connections Please follow the instructions below to connect your IP camera to a computer or a network and to choose a proper RJ-45 cable configuration for connections. Physical specifications of the RJ-45 cable for Ethernet Wire Type Cat. 5 Connector Type RJ-45 Max. Cable Length 100 m Hub Wiring Configuration Straight Through PC Wiring Configuration Straight 4.1.1 Connect to a computer Use a straight LAN cable to connect directly to a com
