Streszczenie treści zawartej na stronie nr. 1
INSTRUCTION MANUAL
NETWORK COLOR CAMERA
N-CC2360
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS .......................... 2 8. ADJUSTMENT ........................................... 9
2. LIST OF INCLUDED 9. ABOUT THE MODE SWITCH .................. 11
COMPONENTS AND PARTS ............ 3 10. ABOUT THE CONTACT
3. GENERAL DESCRIPTION ........................ 4 INPUT/ OUTPUT TERMINAL ...... 12
4. HANDLING PRECAUTIONS ..................... 4 11. SETTING INITIALIZATION ....................... 13
5. NOMENCLA
Streszczenie treści zawartej na stronie nr. 2
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety. • Keep this instruction manual handy for future reference. Safety Symbol and Message Conventions Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage whic
Streszczenie treści zawartej na stronie nr. 3
Indicates a potentially hazardous situation which, if mishandled, could CAUTION result in moderate or minor personal injury, and/or property damage. When Installing the Unit Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the • heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire or electric shock. Leave the installation of the unit to your TOA dealer because the installation requires expert exper
Streszczenie treści zawartej na stronie nr. 4
3. GENERAL DESCRIPTION 3. GENERAL DESCRIPTION The N-CC2360 Network Color Camera can be connected directly to a LAN (10BASE-T/100BASE-TX). Since it can simultaneously transmit MPEG-4 and JPEG data, smooth moving images can be monitored and high- definition still images monitored and recorded. The N-CC2360 can transmit bi-directional sub-band ADPCM or PCM quality voice. Its power supply features PoE compatibility in addition to 24V AC or 24V DC operation, permitting simplified wiring work and cabl
Streszczenie treści zawartej na stronie nr. 5
5. NOMENCLATURE [ ] Top panel 7 [ ] [][ ] N-CC2360 Rear panel Side panel Front panel 8 4 11 5 3 10/100M AUDIO MONITOR OUT OUT LINK FD/COL /ACT CONTACT OFF ON RDY BUSY ERR INITIALIZE IN OUT F.ADJ 2 1 24V ANTI-FLICKER NC 2 RESET 12C12C 24V 9 12 10 1 6 13 14 (1) Power Input Terminal [24 V AC, 24 V DC] (6) Contact Input/Output Terminal Connect this terminal to the 24 V AC or 24 V DC • Contact input terminal: power supply. Used to receive alarm signals from sensors, etc. Setting the termina
Streszczenie treści zawartej na stronie nr. 6
Wall surface Wall surface 6. INSTALLATION [Ceiling Mounting Example] [Wall Mounting Example] Camera mounting Ceiling surface bracket (optional) Lock lever Camera mounting bracket (optional) Pedestal Camera mount Camera mount Pedestal Camera mounting Lock lever bracket (optional) Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket. Doing otherwise may result in the unit falling WARNING down and causing personal injury and/or propert
Streszczenie treści zawartej na stronie nr. 7
Notes 6mm or less To avoid damaging the internal sections of the camera's lens mount, be sure • that the lens flange is 6 mm or less thick as illustrated on the right. C-mount lenses must be used in conjunction with the Lens Mounting Adapter • CF-5 (optional). Lens 3. Mount the optional Camera Mounting Bracket to the ceiling or wall. The bracket must be fixed securely using an electrical box and screws supplied with the bracket. When securing, be sure to run the LAN cable through the hole in the
Streszczenie treści zawartej na stronie nr. 8
7. CONNECTIONS 7.1. Connection Example By connecting a network video receiver and PC to a hub and performing each equipment settings at the PC, camera images can be viewed at the monitor. Installing the supplied software decoder in the PC permits camera settings to be performed and camera images to be viewed at the pc with the software decoder installed. When connecting the N-CC2360 network color camera to the hub, use CAT 5 or greater straight cable fitted with RJ45 connectors. For each equipm
Streszczenie treści zawartej na stronie nr. 9
8. ADJUSTMENT 1. The RDY indicator lights when the power is supplied to the network camera. 2. Connect the monitor output terminal to the monitor so that the picture may be displayed on the monitor. 3. Set the Flicker-reduction switch of the mode switch to "ON" position if flicker is annoying. Flickering of the picture may interfere with the view under fluorescent lamps in the area where power frequency is 50 Hz (CU) or 60 Hz (PL). In such cases, set the Flicker-reduction switch to "ON" position
Streszczenie treści zawartej na stronie nr. 10
6. Adjust the iris level When using the DC input type lens • Adjust the iris level on the Camera menu screen's "IRIS" item. 6-1 Check to confirm that Camera menu setting items are selected as follows. Lens selection: "DC" ( ) Backlight compensation: "OFF" factory default: OFF 6-2 Moving the bar toward "HIGH" side makes the image brighter, and moving it toward "LOW" side makes the image darker. 6-3 Set backlight compensation of a Camera menu screen according to the object condition. Note: For th
Streszczenie treści zawartej na stronie nr. 11
9. ABOUT THE MODE SWITCH 9. ABOUT THE MODE SWITCH 9. ABOUT THE MODE SWITCH Set each switch to the position that provides the best picture reproduction. Set each switch to the position that provides the best picture reproduction. Set each switch to the position that provides the best picture reproduction. [ ] N-CC2360 OFF ON Focus adjustment switch F.ADJ OFF ON Flicker-reduction switch ANTI-FLICKER INITIALIZE F.ADJ ANTI-FLICKER NC Not used. NC RESET ( ) Mode switch factory default Mode switch •
Streszczenie treści zawartej na stronie nr. 12
10. ABOUT THE CONTACT INPUT/ OUTPUT TERMINAL • Contact Input There are two no-voltage contact inputs for connection of sensor trigger signals, etc. A contact can be automatically established between the transmitter and the network video receiver or network digital recorder when a signal enters the contact. Setting the contact input to Day & Night mode forcibly, shorting (making) the Day/Night input terminal forcibly switches the display to B&W mode, which increases the camera’s sensitivity. For
Streszczenie treści zawartej na stronie nr. 13
11. SETTING INITIALIZATION Network settings can be reset to their factory defaults. 1. Either press the Reset key or switch on the power again while holding down the INITIALIZE key. 2. Continue to press the INITIALIZE key until the Ready indicator has switched from flashing to steady-on mode. Note To return camera settings other than those used for network settings to default conditions, use the camera menu. For the camera menu settings, refer to the Setup Manual. 13
Streszczenie treści zawartej na stronie nr. 14
12. TROUBLESHOOTING Remedy Symptom Possible cause Supply power independently to the Camera does not start. Power is not supplied. Camera. (RDY does not light.) [ When using a PoE-compatible hub for power supply ] •Camera not connected to the PoE- compatible hub. • PoE-compatible hub’s PoE function is not made valid. •Camera is connected to the PoE- compatible hub’s port not supporting PoE. •Power requirement exceeds the PoE-compatible hub’s supply capability. [ When using 24V AC or 24V DC for p
Streszczenie treści zawartej na stronie nr. 15
13. SPECIFICATIONS [N-CC2360 CU] * 0 dB = 1V 24 V AC, 50/60 Hz or 24 V DC or PoE (IEEE802.3af) Power Source Power Consumption 13 W (at 24 V AC), (8 W: PoE, 350mA: 24 V DC) (Solid cable: ø 0.4– ø 1.2 mm (AWG 26 – 16), Power Terminal Screwless connector 2 Stranded cable: 0.3–1.25 mm (AWG 22 – 16) VBS 1.0 V(p-p), 75 Ω, RCA pin jack, NTSC Monitor Output Omnidirectional, electret condenser microphone Microphone 1channel, –10 * unbalanced, RCA pin jack Audio Output dB , low impedance, 2 channels (Co
Streszczenie treści zawartej na stronie nr. 16
Network Image Transfer Rate MPEG-4: max. 4 Mbps Simultaneous Connected 5 (MPEG-4: 4, JPEG: 1) Number In streaming mode: No limit (MPEG-4 only) Other Functions Password authentication, Motion detection – + Operating Temperature 10°C to 50°C (continuously active for operation at temperature below 0°C) 14°F to 122°F (continuously active for operation at temperature below 32°F) ( ) Operating Humidity Under 90 % RH no condensation Application Indoor use Finish Case: Surface-treated steel plate, sand
Streszczenie treści zawartej na stronie nr. 17
[N-CC2360 PL] * 0 dB = 1V 24 V AC, 50/60 Hz or 24 V DC or PoE (IEEE802.3af) Power Source Power Consumption 13 W (at 24 V AC), (8 W: PoE, 350mA: 24 V DC) (Solid cable: ø 0.4– ø 1.2 mm (AWG 26 – 16), Power Terminal Screwless connector 2 Stranded cable: 0.3–1.25 mm (AWG 22 – 16) VBS 1.0 V(p-p), 75 Ω, RCA pin jack, PAL Monitor Output Microphone Omnidirectional, electret condenser microphone Audio Output 1channel, –10 dB * , low impedance, unbalanced, RCA pin jack Contact Input 2 channels (Color/B&W
Streszczenie treści zawartej na stronie nr. 18
Network Image Transfer Rate MPEG-4: max. 4 Mbps Simultaneous Connected 5 (MPEG-4: 4, JPEG: 1) Number In streaming mode: No limit (MPEG-4 only) Other Functions Password authentication, Motion detection – + Operating Temperature 10°C to 50°C (continuously active for operation at temperature below 0°C) 14°F to 122°F (continuously active for operation at temperature below 32°F) ( ) Operating Humidity Under 90 % RH no condensation Application Indoor use Finish Case: Surface-treated steel plate, sand
Streszczenie treści zawartej na stronie nr. 19
19
Streszczenie treści zawartej na stronie nr. 20
URL: http://www.toa.jp/ 133-12-993-90
