Instrukcja obsługi Speco Technologies Focus Free Weatherproof Color Dome Camera HTD8FFI/HTB11FFI/HT7248FFI

Streszczenie treści zawartej na stronie nr. 1

INSTRUCTION
MANUAL
Focus Free
HTD8FFI
(Weatherproof Color Dome Camera)
HTB11FFI
(Weatherproof Color Bullet Camera)
HT7248FFI
(Weatherproof Color Dome Camera)
6/20/2012

Streszczenie treści zawartej na stronie nr. 2

◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents ....................................... 5 ◑ Camera Installation ..................................... 6-11 ◑ .............................................. 12-14 ◑ Camera Dimension ..................................... 15, 16 ◑ Features ...................................

Streszczenie treści zawartej na stronie nr. 3

Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly. camera. Be careful not to leave -10°C and +50°C. Be especially careful to provide fingerprints on the lens cover. ventilation when operating under high temperatures. It can cause malfunctions to occur. Severe lighting change or flicker can If exposed to radioactivity the CCD cause the camera to work imprope

Streszczenie treści zawartej na stronie nr. 4

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SERVICEABLE PARTS INSIDE. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Streszczenie treści zawartej na stronie nr. 5

S af et y Instructions Pr ecautions f or use ◑ ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ rical shock ◑ Please insure that your installation area can support the weight of the camera rPlease handle this came a car efully : ◑ Do not use a strong or abrasive detergent when

Streszczenie treści zawartej na stronie nr. 6

Package Contents Please make sure that the following items are included in the Package: 1) HTD8FFI • 1 Video Test Connector, Power Jack • 2 Wrenches • Set Screw - 3 Tapping Screws 4x25 - 2 Hexagon Socket Screws M6x20 2) HTB11FFI • 1 Video Test Connector, Power Jack • 1 Bracket Base • 2 Wrenches • Set Screw - 4 Tapping Screws 4x25 - 4 Hexagon Socket Screws M5x10 3) HT7248FFI • 1 Video Test Connector, Power Jack • 1

Streszczenie treści zawartej na stronie nr. 7

Streszczenie treści zawartej na stronie nr. 8

CAMERA INSTALLATION Compatibility 1) HTD8FFI INTWM INTPM JB03TG 2) HTB11FFI CVCJBB INTJBS INTCM

Streszczenie treści zawartej na stronie nr. 9

CAMERA INSTALLATION Compatibility 3) HT7248FFI INTWM INTPM CVCJBD DFM

Streszczenie treści zawartej na stronie nr. 10

CAMERA INSTALLATION 1. HTD8FFI DOME BASE TAPPING SCREW 4X25, 3EA DOME ASSEMBLY HEXAGON SOCKET SCREW M6X20, 2EA DOME BODY

Streszczenie treści zawartej na stronie nr. 11

CAMERA INSTALLATION 2. HTB11FFI CAMERA ASSEMBLY BASE ADAPTOR BRACKET TAPPING SCREW 4X25, 4EA HEXAGON SOCKET SCREW M5X10, 4EA

Streszczenie treści zawartej na stronie nr. 12

CAMERA INSTALLATION 3. HTB7248FFI PLASTIC ANCHOR 6x30, 3EA VANDAL DOME BASE ASSEMBLY TAPPING SCREW 4X40, 3EA VANDAL DOME BODY ASSEMBLY BODY OUTER COVER

Streszczenie treści zawartej na stronie nr. 13

650 Line Intensifier3 (Weatherproof Color Dome Camera) Focus Free Focus free AI Motorized zoom Lens(2.8-10mm) ■ H T D 8 F F I SPECIFICATIONS MODEL HTD8FFI 1/3” Sony Super HAD ll CCD Image Pick-Up Device NTSC, PAL TV System NTSC=811(H) * 508(V) / PAL=795(H) * 596(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V) Scanning Frequency 2:1 Interlace Scanning System Internal Synchronization 650TV Lines Resolution C

Streszczenie treści zawartej na stronie nr. 14

650 Line Intensifier3 (Weatherproof Color Bullet Camera) Focus Free Focus free AI Motorized zoom Lens(2.8-10mm) H T B 1 1 F F I ■ SPECIFICATIONS MODEL HTB11FFI 1/3” Sony Super HAD ll CCD Image Pick-Up Device NTSC, PAL TV System NTSC=811(H) * 508(V) / PAL=795(H) * 596(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V) Scanning Frequency 2:1 Interlace Scanning System Internal Synchronization 650TV Lines Resolut

Streszczenie treści zawartej na stronie nr. 15

650 Line Intensifier3 (Weatherproof Color Dome Camera) Focus Free Focus free AI Motorized zoom Lens(2.8-10mm) H T 7 2 4 8 F F I ■ SPECIFICATIONS MODEL HT7248FFI 1/3” Sony Super HAD ll CCD Image Pick-Up Device NTSC, PAL TV System NTSC=811(H) * 508(V) / PAL=795(H) * 596(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels NTSC=15.734KHz(H) & 59.94Hz(V) / PAL=15.625KHz(H) & 50.00Hz(V) Scanning Frequency 2:1 Interlace Scanning System Internal Synchronization 650TV Lines Resolu

Streszczenie treści zawartej na stronie nr. 16

CAMERA INSTALLATION 1) HTD8FFI 5.47” dia 2) HTB11FFI 11.02” 3.46” 5.90” 5.03” 10.51” 4.01” 3.11” 4.36” 3.34” 3.89” dia 3.70”

Streszczenie treści zawartej na stronie nr. 17

CAMERA INSTALLATION 3) HT7248FFI 5.10” dia 5.10” dia 3.93” dia 16 1.16” 3.46”

Streszczenie treści zawartej na stronie nr. 18

PRESETS (Outdoor, Indoor, Elevator, Lobby, Hallway & Low Light) Used for a quick and easy setup for the installation environment. Horizontal resolution of 650 TV lines is achieved by using a SONY Super-HAD CCD with 410,000 pixels, and a custom DSP yielding pictures with a high S/N ratio. More Powerful Performance in low light condition. High quality Pictures to be captured in very low light condition. More Powerful WDR in strong back lighting. Your camera allows you to get a clear image. This fu

Streszczenie treści zawartej na stronie nr. 19

Built in motion detector with adjustable areas of coverage will Send a signal to an external alarm device when motion is detected. It also has the ability to mask up to 8 areas of the picture where Viewing is not desired. Each zone can be independently programmed via the OSD This function removes image jitter that is caused by vibrations in the building and reduces the amount of hard drive space. The picture could be enlarged by this function in digital. conditions, or you can have it automatica

Streszczenie treści zawartej na stronie nr. 20

● rP eset Mode SPECO TECH 1.PRESET MODE INDOOR 2.MAIN SETUP 3.EXIT RESET r1. P eset : LINDOOR / OUTDOOR / LOW LIGHT / HAL W A Y / L OBB Y / ELE V A T OR. U- fsed for a quick and easy setup or the installation envir onment. ● Menu S etup r1. P Fess the unction S etup switch. - Main setup m