Streszczenie treści zawartej na stronie nr. 1
S
N
A
L
A
Digital Still Camera
Thank you for your purchase. For the correct usage of this product,
please read this User's Manual and warranty card carefully and
keep them in a safe place for future reference.
Before accepting the warranty card, please make sure that the
date of purchase and the dealer's details have been completed.
User Manual
C
I
N
O
K
Streszczenie treści zawartej na stronie nr. 2
Table Of Contents Table Of Contents Setting Up Auto Power Off ------------------------------------------------------- 28 Getting Started ---------------------------------------------------------4 Setting Up Date Stamp ---------------------------------------------------------- 28 Important Safety Precautions ------------------------------------- 5-9 Setting Up Date Type ------------------------------------------------------------- 28 Date Setup ------------------------
Streszczenie treści zawartej na stronie nr. 3
Getting Started Important Safety Precautions Please be sure to read this manual before use. This product has been designed with safety in mind; however, please read the following display marks, warnings and cautions Test shooting for its correct usage. Be sure to take some test shots before taking important pictures The following warning and caution symbols are to prevent (such as business or weddings) to make sure that the camera is damage to the user, other persons and property. w
Streszczenie treści zawartej na stronie nr. 4
Important Safety Precautions Important Safety Precautions Warning Warning Do not directly look at the sun through the viewfinder. Should any of the following occur, stop using the product Lossoforimpairedeyesightmayresult. immediately. Remove the batteries from the unit and disconnect the AC adapter. If using the AC adapter, Do not touch the metal parts on the camera during dis
Streszczenie treści zawartej na stronie nr. 5
Important Safety Precautions Important Safety Precautions Caution Caution When taking a picture, wipe off the flash surface and Remove the batteries when the camera will not be becarefulnottocovertheflash. used for an extended period. Iftheflashsurfaceisdirtyoryoutakeashotwiththeflash covered,itispossiblefortheflashsurfacequalityorcolor Do not use force
Streszczenie treści zawartej na stronie nr. 6
S N A L A Introduction Introduction Accessories Included External View Safety Notes Safety Notes Shutter Button Top Digital Camera Camera Driver 2 x AA Batteries & Ulead Software & User Manual Mode Dial View Finder Camera Pouch Wrist Strap Quick Start Guide Front Flash Quick Self-timer LED Start Guide USB Connector DC In Connector USB Cable
Streszczenie treści zawartej na stronie nr. 7
S N A L A Introduction Introduction TFT LCD Monitor Icon Definition Safety Notes Back View Finder Power Switch Battery status Flash mode ( ) Battery full ( )Auto flash LED ( ) Battery half drained ( )Auto flash with Indicator ( ) Battery drained red-eye reduction Menu Button ( )Night scene Macro or portrait ( )Fill-in flash Strap Eyelet ( )Flash off TFT LCD Digital zoom Monitor Working mode White balance Up ( )Direction Button ( )Shooting mode ( )Au
Streszczenie treści zawartej na stronie nr. 8
Introduction Preparation For Taking Pictures Icon Index How to Switch On Or Off The Camera Safety Notes Safety Notes To switch on the camera, slide the Power Switch to the side and Working Mode hold it for 1 second. To switch off the camera, slide the Power Switch to the side and hold it for 1 second again. Focus Range Loading the Batteries Flash Modes X4 This camera is using 2 x AA batteries. Digital Zoom X1 1. Make sure th
Streszczenie treści zawartej na stronie nr. 9
Preparation For Taking Pictures Preparation For Taking Pictures Using An AC Adapter(Opticnal) Note 1. Do not change the battery with wet hands, as there is a 1. Switch off the camera. 2. Make sure the AC adapter is 3.3V/2.0A. danger of electric shock. 3. Plug the AC adapter into the DC In Connector. 2. Warning 4. Switch on the camera. When you continue using the camera for a long time, the batteries become hot. Contact with the batteries can lead to Note burns.
Streszczenie treści zawartej na stronie nr. 10
Preparation For Taking Pictures Preparation For Taking Pictures Inserting An SD Card Note This camera comes with approximately 8 MB of memory installed, but if you would like to use additional memory, the following 1. Switch off the camera. cards are compatible: 2. Open the Battery / Memory Card Cover. SD Memory Card 3. Insert the SD card into the card slot and press it down until you About the SD Memory Card hear a click sound. 4. Close the Battery / Memory Card Cove
Streszczenie treści zawartej na stronie nr. 11
Preparation For Taking Pictures Setting Up Functions Before Taking Pictures Important Under Shooting Mode ( ) In the event of malfunction or damage, it is possible that Please set the Mode Dial at Shooting Mode ( ) before setting up the below functions. data may be lost. Konica can not accept responsibility in any way for such data loss. Setting Up Focus Range Before you take pictures, please make sure you set the Focus Always back-up
Streszczenie treści zawartej na stronie nr. 12
Setting Up Functions Before Taking Pictures Setting Up Functions Before Taking Pictures Setting Up Self-timer (Preset : off) 2. There are four resolutions can be selected which are: To activate the self-timer or cancel the self-timer, press Up ( ) Direction Button. Self-timer will be activated when the Shutter Image Size Compression Ratio 8MB SD Memory Card Button is pressed. This funct
Streszczenie treści zawartej na stronie nr. 13
Setting Up Functions Before Taking Pictures Setting Up Functions Before Taking Pictures Setting Up White Balance (Preset : Auto White Balance) Formatting An SD Card Safety Notes Please set the Mode Dial at Shooting Mode ( ) and press Menu Please format the new card for the first time in advance before Button to enter "Still Image" menu table. using it. Please set the Mode Dial at Playback
Streszczenie treści zawartej na stronie nr. 14
Setting Up Functions Before Taking Pictures Setting Up Functions Before Taking Pictures Setting An Image At Protect Status (Preset : Unlock) Under Movie Clip Mode( ) (Preset : 10 Seconds ) Safety Notes To set an image at protect status can prevent the selected image from being erasing. Please set the Mode Dial at Movie Clip Mode( ) . 1. Select "Protect". 2. Select "Lock"
Streszczenie treści zawartej na stronie nr. 15
Setting Up Functions Before Taking Pictures Setting Up Functions Before Taking Pictures Date Setup Setting Up Beep Sound (Preset Safety Notes : On) Safety Notes 1. Select "Date Setup". Please set the Mode Dial at Set Up Mode ( ). 2. Press Right Direction Button ( ). 1. Select "Beep". 3. Use Up ( ) and Down ( ) Direction Buttons to change the 2. Press Right Directi
Streszczenie treści zawartej na stronie nr. 16
Taking Pictures Playback / Erasing 1. Switch on the power by sliding the Power Switch to the side, Viewing A Part Of An Image Safety Notes holding it for 1 second, and letting it go. Set the Mode Dial at Playback Mode ( ). The TFT LCD Monitor 2. Set the Mode Dial at Shooting Mode ( ) for still image will show the latest captured image. capture or Movie Clip Mode ( ) for videos. 1. Press Right Direction Button (
Streszczenie treści zawartej na stronie nr. 17
Playback / Erasing Installing Camera Driver Playing A Recorded Movie Clip Under Microsoft Windows 98 / 98SE Please set the Mode Dial at Playback Mode ( ). Use Up ( ) and Down( ) Direction Buttons to select a movie clip. 1. Turn on the computer. Select a recorded movie clip. Press Right Direction Button ( ) to play the movie clip. 2. Insert the CD into the CD-ROM Drive. Note You can press Right Direction Button ( ) to pause the playing and pr
Streszczenie treści zawartej na stronie nr. 18
Installing Camera Driver Installing Camera Driver 3. A welcome window appears and please click "Next" to got to 6. Click "Yes" to proceed the installation of DirectX8.1. next step. 7. A license agreement appears and please read the content of the agreement. If you accept the terms of the license agreement, click "Yes" to go the next step. Or you can click "No" to cancel the installation of Ulead Explorer 7.0 SE Platinum. 4. The computer will start the install
Streszczenie treści zawartej na stronie nr. 19
Installing Camera Driver Installing Camera Driver 9. Please click "OK" to restart the PC. Under Microsoft Windows 2000 1. Turn on the computer. 2. Insert the CD into the CD-ROM Drive. If the PC is set to auto run the program, simply click "Driver" to start the installation. If the PC is not set to auto run the program, please go to the Start Menu, click "Run" and key in "CD-ROM Drive:\Camera.exe" and then click "OK" Button.
Streszczenie treści zawartej na stronie nr. 20
Installing Camera Driver Installing Camera Driver 3. Click "OK" to proceed the installation of DirectX8.1. 6. Please click "OK" to restart the PC. 4. A license agreement appears and please read the content of the agreement. If you accept the terms of the license agreement, click "Yes" to go the next step. Or you can click "No" to cancel the installation of Ulead Explorer 7.0 SE Platinum 5. The PC will start the installation of DirectX8.1. After the installat
