Streszczenie treści zawartej na stronie nr. 1
Color Television
Operating Instructions
®
#
7
m m
Read these instructions completely before operating this set.
Contents subject to change without notice or obligation.
Printed in Canada
TQB2A0952
Streszczenie treści zawartej na stronie nr. 2
Safety Instructions WARNING WARNING: To reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash withar- Theexclamation point within that parts inside the product ating and servicing instruc- row-head within a triangle _ a triangle is intended to tell are ariskof electric shockto tions are in the papers with is intended to tell the user A the userthat important oper- persons, the appliance
Streszczenie treści zawartej na stronie nr. 3
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. In the U.S. Section 810 of the National Electrical Code and in Canada Part I of the Canadian Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, • location of ant
Streszczenie treści zawartej na stronie nr. 4
Introduction Congratulations on Your New Purchase Your new video component features an all solid state chassis which is designed to give you many years of enjoyment. It was thoroughly tested and adjusted at the factory for best performance. In order for you to take full advantage of your new video component, please read and follow the installation and operating instructions supplied with this product. Customer's Record The model and serial number of this product may be found on its back cover. Y
Streszczenie treści zawartej na stronie nr. 5
Installation Receiver Location Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture. To insure optimum color purity do not position magnetic equipment (motors, fan, other speakers, etc.) nearby. Optional Extern
Streszczenie treści zawartej na stronie nr. 6
Antenna/Cable Connections Antenna Connection - For proper reception of VHF/UHF channels an external antenna is required. For best reception an outdoor antenna is recommended. Antenna Mode must be set to -IV. (Refer to Antenna Mode section.) Indoor Outdoor Incoming Cable From Home Antenna (75 Ohm) Typical VHF/UHF Antenna VHF/UHF onBackofSet @..- Incoming Cable From Home Antenna (300 Ohm) VHF/UHF on Back of Set @ 300 to 75 Ohm Matching Transformer (Not Included) Cable Connection - For reception of
Streszczenie treści zawartej na stronie nr. 7
Picture in Picture External Video and Antenna Connection This Receiver has the "PICTURE IN PICTURE" feature. For the proper operation of this feature a second video source is required (such as a VCR). We recommend that you make your antenna and External Video connection as shown below when a second video source is available. PIP External Video Connection VCR or VIDEO DISC PLAYER TERMINALS ON BACK OF RECEIVER TERMINALS ON BACK OF VCR I • S-VIDEO VIDEO OUT Incoming Cable ® AUDIO OUT AUOIO AUDIO AM
Streszczenie treści zawartej na stronie nr. 8
Location of Controls (Receiver) \ _0®.7°°° I I J EE m \ Front Control Panel \ Remote Control Sensor -8-
Streszczenie treści zawartej na stronie nr. 9
Quick Reference Control Operation (Receiver) O Power Button - Press to turn ON or OFF. (pg.12) Q Volume Buttons - Press to adjust Sound Level. Press to adjust Audio Menus, Video Menus and select operating features when menus are displayed. (pg.12) Q Channel Buttons - Press to select programmed channels. Press to highlight desired features when menus are displayed. (pg.12) Q Action Button - Press to display Main Menu and access orexit On Screen feature and Adjustment Menus. (pg.16) Q V/Video Butt
Streszczenie treści zawartej na stronie nr. 10
Location of Controls (Remote Control) POWER CD ® ® MULTI ® ® ® ® ® ® ®1 ® ® @1 ® I ® ® @1 ® ® CABLE POWER RECORD 7-7 @ @ @ ® TVNCR STOP .ov0 =zEPA_E ® @ ,I---1 I-_1 .1_, ' __ l -10-
Streszczenie treści zawartej na stronie nr. 11
Quick Reference Control Operation (Remote Control) O Power Button - Press to turn ON or OFF. (pg.12) Q Volume Buttons - Press to adjust Sound Level. Press to adjust Audio Menus, Video Menus and select operating features when menus are displayed. (pg.12) Q Channel Buttons - Press to select programmed channels. Press to highlight desired features when menus are displayed. Also used to select Cable Converter box channels after programming Remote Control Infra-red codes (the TVNCR/CABLE switch must
Streszczenie treści zawartej na stronie nr. 12
Channel Change- (Two options) Power Button - Press the POWER button to turn ON. Press again to turn OFF. Option 1. Press the CHANNEL (CH) UP or DOWN button to POWER sequentially scan through programmed channels (when On Screen menus are not displayed). NOTE: TV/VCR/CABLE switch (located on Remote) must be set in TV position). TVNC_CAB_ Located On Remote Control _=_====_._ _ Selects Next Volume Buttons - Press the VOLUME (VOL) LEFT or RIGHT button for desired listening level (when On Screen menus
Streszczenie treści zawartej na stronie nr. 13
Multi Button TV/Video Button - Press the TVNIDEO button to select desired input for Main Picture or PIP frame The MULTI button can be programmed to operate up to 6 Remote function buttons at the same time. (when the PIP frame is displayed). For Example: TV Power/On, VCR Power/On (selected TVNIDEO brands) can be operated at the same time with one press of the MULTI button. PROCEDURE 1. First program the Remote for the selected VCR Signal connected to: Infra-red access code. Confirm that the Remot
Streszczenie treści zawartej na stronie nr. 14
Cable Power Button - The CABLE Power PIP Swap Button - Press the SWAP button button on the Remote Control has been designed to (when the PIP frame is displayed) to interchange what is being viewed on the Main Picture with that of the PIP operate selected brands of Cable Converter Boxes. The frame. proper Cable Converter Box infra-red code must be obtained prior to use. (Please refer to Programming the Universal Remote for programming instructions.) The TVNCR/CABLE switch should be in the cable p
Streszczenie treści zawartej na stronie nr. 15
PIP Freeze Button - Pressthe FREEZE button PIP Move Button - The PIP frame may be to stop action in the Main Picture or PIP frame. located at any corner of the Main Picture by pressing the MOVE button. Main Picture NOTE: Each time MOVE button is pressed (when the PIP frame is displayed), the PIP frame will move (counterclockwise) as illustrated. _ Frame reeze I-q I-1 • Pressing the FREEZE button when the PIP frame is not displayed will stop action in the Main Picture and put it into a PIP frame.
Streszczenie treści zawartej na stronie nr. 16
Main Menu (Icons) L;L I :,1 Located On Remote Control ACTION Highlight Desired Feature When Menu is Displayed Displays and Exits Menus Selects or Adjusts Features When Menu is Displayed 1. Press the ACTION button to display the Main Menu with Icons. 2. Press the CH UP or DOWN and the VOL LEFT or RIGHT buttons to select the desired Icon when the Main Menu is displayed (selected Icon will be indicated in Red). 3. Press the VOL buttons for left and right movement and the CH buttons for up or down m
Streszczenie treści zawartej na stronie nr. 17
AI Sound --This feature is used to enhance sound AI (Artificial Intelligence) quality through automatic adjustment of Bass and • AI Sound Treble during Speech or Music segments of the audio broadcast. It also regulates the volume between program and commercial audio to maintain a constant sound output level. ACTION 1. Press the ACTION button to display the Main Menu. 2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttons to highlight the AI Icon. 3. Press the ACTION button to display the AI (Artific
Streszczenie treści zawartej na stronie nr. 18
Picture Adjustments Color, Tint, Brightness, Picture & • Picture Norm Sharpness Adjustments • Color Before setting the following Picture Adjustments select • Tint the desired mode of AI Picture (ON or OFF). Picture Ad- • Brightness justments may require re-adjustment when changing • Picture between AI Picture ON or OFF. • Sharpness 1. Press the ACTION button to display the Main Menu. • Auto Color 2. Press the CH UP/DOWN and VOL LEFT/RIGHT • Video NR (Noise Reduction) buttons to highlight the Pic
Streszczenie treści zawartej na stronie nr. 19
Auto Color and Video NR Auto Color --This feature automatically optimizes color adjustment to compensate for signal variations. 1. Press the ACTION buttonto displaythe Main Menu. 2. Press the CH UP/DOWN and VOL LEFT/RIGHT buttons to highlightthe Picture Icon. ACTION 3. Press the ACTION button to display the Picture Adjustment Menu. Displays and Exits Menus _ VIDEO PICTURE NORM NO COLOR ..... 4-..... Located On Remote Control TINT ...... I-..... BRIGHTNESS ..... 4-..... PICTURE 4- F VIDEO NR OFF
Streszczenie treści zawartej na stronie nr. 20
Audio Norm --This feature is used to reset BASS, Audio Adjustment TREBLE and BALANCE back to a factory preset level. • Audio Norm ACTION 1. Press the ACTION button to display the Main Menu. • Bass 2. Press the CH UP/DOWN and VOL LEFT/RIGHT • Treble buttons to highlight the Audio Icon. • Balance 3. Press the ACTION button to display the Audio • Surround Adjustment Menu. • [TV] Speaker Displays and Exits Menus • Audio Mode Located On Remote Control _ AUDIO Highlight Desired BASS ÷ TREBLE ÷ BALANCE
