Streszczenie treści zawartej na stronie nr. 1
COLOUR TELEVISION
Contents
AV-21WMG5
Knowing your TV’s features ........................... 2
.
Remote control buttons and basic functions 3
..............................
TV buttons and functions 5
........................................
Setting up your TV 6
.................................
Basic setting for picture 8
..........................
Advanced setting for picture 9
................................
Basic setting for sound 10
........................
Advanced setting for sound 10
....
Streszczenie treści zawartej na stronie nr. 2
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual throughly before you begin. Safety Instructions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV,
Streszczenie treści zawartej na stronie nr. 3
Remote control buttons and basic functions 1 6 9 0 2 8 3 7 4 5 RM-C1261 No.Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5/∞/2/3 Select and adjust menu function. 4 CHANNEL M Select the desired channel number. 5 VOLUME M Adjust the volume level. 6 TV/VIDEO Select TV or VIDEO terminal input. 7 MUTING Turn off the volume. Press this button again to resume the volume. 8 DISPLAY Display the programme number or video terminal number a
Streszczenie treści zawartej na stronie nr. 4
Remote control buttons and basic functions How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2.To exit the MENU, press the DISPLAY/BACK button* 8 or choose EXIT menu. Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Press ∞ button 3 to display the Then press MENU/OK button 2. next page for more functions. Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 3rd menu. Press 5/
Streszczenie treści zawartej na stronie nr. 5
TV buttons and functions Front of the TV 9785 6 4 3 2 1 AV-21WMG5 POWER VIDEO AUDIO MENU CHANNEL VOLUME OK IN (VIDEO-2) Rear of the TV AV-21WMG5 =- 0 No. Button/terminal Description 1I (main power) Press to turn on or turn off the TV’s main power. 2 Power lamp Indicate the TV is being turned on or off. No colour : TV’s main power is being turned off. Red : TV’s main power is being turned on. 3 Not Application 4 Remote control sensor 5 VOLUME M Press
Streszczenie treści zawartej na stronie nr. 6
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial 2 Connecting the compatible main plug to the AC outlet. VHF/UHF outdoor aerial Rear of the TV 3 Inserting batteries into the remote control. Insert two batteries by following the ª and · polarities and inserting the · end first. CAUTION: If you connect a VCR, connect the aerial Follow the cautions printed on the batteries. output jack of your VCR and t
Streszczenie treści zawartej na stronie nr. 7
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: êìëëäàâ 7 •Press 5/∞ button to select your desired • Press the red button to cancel the SETUP language. TOUR RESTART function. If you want to make initial settings again when the next time you turn on the TV, ≠ press the MENU/OK button to acti
Streszczenie treści zawartej na stronie nr. 8
Basic setting for picture To operate this function with a menu: COLOUR SYSTEM ❇ MENU PICTURE PICTURE MODE You can select the appropriate colour system when the picture is not clear or no colour To return the USER setting to the default, press appears. the blue button when the PICTURE SETTING menu appears. Press the COLOUR SYSTEM button to select a setting. AUTO PAL SECAM Adjusting the picture - USER NTSC4.43 NTSC3.58 You can adjust the desired picture setting when To operate this function with a
Streszczenie treści zawartej na stronie nr. 9
Advance setting for picture BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. ❇ MENU INSTALL BLUE BACK If you wish to continue viewing the poor picture, cancel the BLUE BACK function. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4. 9 GGT0077-001A-H_E_P02-1
Streszczenie treści zawartej na stronie nr. 10
Basic setting for sound SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. B/G I D/K M The function is not available in video mode. For the sound system in each country or region, see the table below: Area Country or Region System Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. B/G Indonesia, Malaysia, Singapore, Asia, Middle Thailand, India, etc. East China
Streszczenie treści zawartej na stronie nr. 11
Favorite channel and video setting To register the favorite channel To adjust the video setting (VIDEO SETTING) You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, You can adjust the picture settings for video blue). inputs. 1 In TV mode, select a TV channel (PR01- 99) 1 Display the PICTURE menu and select you desired to register. VIDEO SETTING in PICTURE FEATURES menu. 2 Press and hold a colour button for 3 seconds or more. ❇ “FAVORITE CHANNEL 7 PROG
Streszczenie treści zawartej na stronie nr. 12
Customized setting To operate this function with a menu: VNR MENU FEATURES OFF TIMER ❇ You can reduce the picture noise. When the elapsed of time left one minute, Select the VNR in the PICTURE FEATURES menu “GOOD NIGHT!” appears on the screen. under PICTURE menu, then choose a setting of You can display the OFF TIMER menu again to VNR function. confirm or change the remaining time. MENU PICTURE PICTURE FEATURES ❇ VNR AUTO SHUTOFF OFF VNR is turned off. You can set the TV to turn off automaticall
Streszczenie treści zawartej na stronie nr. 13
TV channel presetting 5 Press the 3 button to choose an appropri- To register the TV channels auto- ate sound system. matically For details, see “SOUND SYSTEM” on page 10. You can register the TV channels into the TV’s channel list automatically. 6 Press the green or red button to search for the TV channel. 1 Display the INSTALL menu. Searching stops when a channel is found ❇ MENU INSTALL and displayed. 2 Choose AUTO PROGRAM, then press the 7 Repeat step 5 until your desired TV MENU/OK button. c
Streszczenie treści zawartej na stronie nr. 14
TV channel presetting Channel To add in the new channel CH US CCIR OIRT AUSTRALIA CH US CCIR OIRT AUSTRALIA (INSERT in the EDIT menu) CH 02 US- 2 E2 R1 AU- 0 CH 36 US- 36, W+ 51 E36 CH 03 US- 3 E3 AU- 1 CH 37 US- 37, W+ 52 E37 You can add in the new channel in the TV CH 04 US- 4 E4 R2 AU- 2 CH 38 US- 38, W+ 53 E38 CH 05 US- 5 E5 R6 AU- 6 CH 39 US- 39, W+ 54 E39 channel list as you like. CH 06 US- 6 E6 R7 AU- 7 CH 40 US- 40, W+ 55 E40 You need to find the “CH/CC” number for the TV CH 07 US- 7 E7
Streszczenie treści zawartej na stronie nr. 15
Additional preparation Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV. Front of the TV • Note that connecting cables are not supplied. Headphones Camcorder or TV game VIDEO AUDIO MENU C OK IN (VIDEO-2) Rear of the TV VCR (for playing) DVD player (Composite signals) VCR (for recording) Troubleshooting If a problem occurs when you are using the TV, check the followi
Streszczenie treści zawartej na stronie nr. 16
Specifications TV RF systems B/G, I, D/K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. Power requirements AC 110 to 240 V, 50/60 Hz Power consumption 63 W External input / output VIDEO-1: VIDEO input, AUDIO input VIDEO-2: VIDEO input, AUDIO input* (*You can choose to connect one of AUDIO input jacks) OUTPUT: VIDEO output, AUDIO output Headph
